（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 1171:1981 | Solid mineral fuels -- Determination of ash | ||||
| ISO 1171:1997 | Solid mineral fuels -- Determination of ash | ||||
| ISO 16488:2015 | Marine finfish farms -- Open net cage -- Design and operation | ||||
| ISO/NP 11907-1 | Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 1: General requirements and applicability | ||||
| ISO 4766:2011 | Slotted set screws with flat point | ||||
| ISO 7046-1:2011 | Countersunk flat head screws (common head style) with type H or type Z cross recess -- Product grade A -- Part 1: Steel screws of property class 4.8 | ||||
| ISO 7046-1:1994 | Countersunk flat head screws (common head style) with type H or type Z cross recess -- Product grade A -- Part 1: Steel of property class 4.8 | ||||
| ISO 4759-2:1979 | Tolerances for fasteners -- Part 2: Bolts, screws and nuts with thread diameters from 1 up to 3 mm and product grade F, for fine mechanics | ||||
| ISO 6157-3:1988 | Fasteners -- Surface discontinuities -- Part 3: Bolts, screws and studs for special requirements | ||||
| ISO 2325:1979 | Coke -- Size analysis (Nominal top size 20 mm or less) | ||||
| ISO 7050:2011 | Cross-recessed countersunk (flat) head tapping screws | ||||
| ISO 7050:1983 | Cross recessed countersunk (flat) head tapping screws (common head style) | ||||
| ISO 7049:2011 | Cross-recessed pan head tapping screws | ||||
| ISO 7085:1999 | Mechanical and performance requirements of case hardened and tempered metric thread rolling screws | ||||
| ISO 7378:1983 | Fasteners -- Bolts, screws and studs -- Split pin holes and wire holes | ||||
| ISO 7434:1983 | Slotted set screws with cone point | ||||
| ISO 8765:1988 | Hexagon head bolts with metric fine pitch thread -- Product grades A and B | ||||
| ISO 8676:1999 | Hexagon head screws with metric fine pitch thread -- Product grades A and B | ||||
| ISO 10664:1999 | Hexalobular internal driving feature for bolts and screws | ||||
| ISO 4282:1977 | Acid-grade fluorspar -- Determination of loss in mass at 105 degrees C | ||||
| ISO 10510:2011 | Tapping screw and washer assemblies with plain washers | ||||
| ISO 8839:1986 | Mechanical properties of fasteners -- Bolts, screws, studs and nuts made of non-ferrous metals | ||||
| ISO 10666:1999 | Drilling screws with tapping screw thread -- Mechanical and functional properties | ||||
| ISO 14585:2001 | Hexalobular socket pan head tapping screws | ||||
| ISO/IEC 14496-5:2001/Amd 31:2012 | Reference software for efficient representation of 3D meshes with multiple attributes | ||||
| ISO 10673:2009 | Plain washers for screw and washer assemblies -- Small, normal and large series -- Product grade A | ||||
| ISO 4033:2012 | Hexagon high nuts (style 2) -- Product grades A and B | ||||
| ISO/DIS 4161 | Hexagon high nuts with flange -- Product grades A and B | ||||
| ISO 6157-2:1995 | Fasteners -- Surface discontinuities -- Part 2: Nuts | ||||
| ISO 16135:2006/NP Amd 1 | |||||
| ISO/CD 10791-7 | Test conditions for machining centres -- Part 7: Accuracy of finished test pieces | ||||
| ISO 10563 | Buildings and civil engineering works -- Sealants -- Determination of change in mass and volume | ||||
| ISO 15874-1:2003/Amd 1:2007 | |||||
| ISO 4282:1992 | Acid-grade and ceramic-grade fluorspar -- Determination of loss in mass at 105 degrees C | ||||
| ISO 4284:1978 | Acid-grade fluorspar -- Determination of sulphide content -- Iodometric method | ||||
| ISO 6386:1981 | Muscovite mica splittings -- Grading and visual classification | ||||
| ISO 6765:1985 | Shipbuilding -- Shipborne barges, series 3 -- Main dimensions | ||||
| ISO 6676:1981 | Acid-grade fluorspar -- Determination of total phosphorus content -- Molybdophosphate photometric method | ||||
| ISO 14529-1:1999 | Plastics -- Melamine/phenolic powder moulding compounds (MP-PMCs) -- Part 1: Designation system and basis for specifications | ||||
| ISO 29042-4:2009 | Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 4: Tracer method for the measurement of the capture efficiency of an exhaust system | ||||
| ISO 29042-5:2010 | Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 5: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet | ||||
| ISO/TS 15926-6:2013 | Industrial automation systems and integration -- Integration of life-cycle data for process plants including oil and gas production facilities -- Part 6: Methodology for the development and validation of reference data | ||||
| ISO 10723:1995/Cor 1:1998 | |||||
| ISO/CD 20676 | Natural gas -- Upstream area -- Determination of hydrogen sulfide content by laser absorption spectroscopy | ||||
| ISO 29042-2:2009 | Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant | ||||
| ISO 29042-9:2011 | Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 9: Decontamination index | ||||
| ISO 3675:1993 | Crude petroleum and liquid petroleum products -- Laboratory determination of density or relative density -- Hydrometer method | ||||
| ISO 8098:1989 | Cycles -- Safety requirements for bicycles for young children | ||||
| ISO 8124-1:2012 | Safety of toys -- Part 1: Safety aspects related to mechanical and physical properties | ||||
| ISO/DIS 4869-1 | Acoustics -- Hearing protectors -- Part 1: Subjective method for the measurement of sound attenuation |
若您对上表中数据有任何疑问，请与网站联系。
