（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ANSI C78.81-2010 | Electric Lamps - Double-capped Fluorescent Lamps - Dimensional And Electrical Characteristics | 2010-03-12 | |||
| ANSI C82.11-2011 | Lamp Ballasts: High Frequency Fluorescent Lamp Ballasts | 2011-09-14 | |||
| NFPA 130:2014 | Fixed Guideway Transit And Passenger Rail Systems | 2013-08-21 | |||
| DVS 1617:2008 | Quality Requirements On Subsuppliers For The Welding Of Rail Vehicles And Rail Vehicle Parts | 2008-02-01 | |||
| AS/NZS 1580.0:1996 | Paints and related materials - Methods of test Introduction and list of methods | 1996-05-05 | |||
| ASTM A240/A240M-14 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | 2014-05-01 | |||
| JIS G 3193:2005 | Dimensions, mass and permissible variations of hot rolled steel plates, sheets and strips | 2005-03-20 | |||
| EN 50121-3-1:2017 | Railway Applications - Electromagnetic Compatibility - Part 3-1: Rolling Stock - Train And Complete Vehicle | ||||
| IEEE C37.16:2009 | Preferred Ratings, Related Requirements, And Application Recommendations For Low-voltage Ac (635 V And Below) And Dc (3200 V And Below) Power Circuit Breakers | 2009-06-05 | |||
| DVS 1610:2012 | DVS-VERLAG GmbH, Verlag für Schweissen und verwandte Verfahren | 2012-03-01 | |||
| ANSI C78.901-2005 | Electric Lamps - Single-based Fluorescent Lamps - Dimensional And Electrical Characteristics | 2005-03-23 | |||
| DVS 1608:2011 | Design And Strength Assessment Of Welded Structures From Aluminium Alloys In Railway Applications | 2011-09-01 | |||
| DVS 1608:2010 | DVS-VERLAG GmbH, Verlag für Schweissen und verwandte Verfahren | 2010-03-01 | |||
| NF EN 13913:2004 | Railway Applications - Rubber Suspension Components - Elastomer-Based Mechanical Parts | 2004-03-01 | |||
| DR 03430 | Safety glazing for land vehicles | ||||
| DR 03618 CP | Paints and related materials - Methods of test Method 0: Introduction and list of methods | ||||
| DIN EN 45545-2 (2005-04) | Railway Applications - Fire Protection Of Railway Vehicles - Part 2: Requirements For Fire Behaviour Of Materials And Components | 2005-04-01 | |||
| DIN ISO 7046 (1990-08) | Cross Recessed Countersunk Flat Head Screws (common Head Style) - Product Grade A And Property Class 4 -8 Only | 1990-08-01 | |||
| DIN EN ISO 4628-8 (2005-05) | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 8: Assessment of degree of delamination and corrosion around a scribe (ISO 4628-8:2005) | 2005-05-01 | |||
| DIN 50021 (1988-06) | Spray tests with different sodium chloride solutions | 1988-06-01 | |||
| VDA 621-402:1985 | 1985-03-01 | ||||
| DIN IEC 28A-121-CD (1998-04) | Insulation Coordination For Electrical Equipment Within Low-voltage Systems - Amendment 1 To Iec 60664-1 (1992): Revisions Of Pollution Degrees And Creep Age Distance Requirements | 1998-04-01 | |||
| DIN IEC 60664-1 (2005-12) | Insulation Coordination For Equipment Within Low-voltage Systems - Part 1: Principles, Requirements And Tests | 2005-12-01 | |||
| DIN 558 (1987) | M 5 To M 36 Hexagon Head Screws Threaded Up To The Head; Product Grade C | ||||
| DIN 6930-2 (1989-04) | Steel stampings; general tolerances | 1989-04-01 | |||
| DIN EN ISO 4017 (2015-05) | Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014) | 2015-05-01 | |||
| DIN EN ISO 4017 (2014-10) | Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014) | 2014-10-01 | |||
| DIN EN ISO 4017 (2001-03) | Hexagon head screws - Product grades A and B (ISO 4017:1999); English version of DIN EN ISO 4017 | 2001-03-01 | |||
| DIN 6930-1 (1983-01) | Stamped Steel Parts; Technical Delivery Conditions | 1983-01-01 | |||
| DIN EN ISO 4017 (2011-07) | Hexagon head screws - Product grades A and B (ISO 4017:2011) | 2011-07-01 | |||
| DIN EN 378-1 (2008-06) | Refrigerating systems and heat pumps - Safety and environmental requirements Part 1: Basic requirements, definitions, classification and selection criteria | 2008-06-01 | |||
| DIN EN 378-1 (2012-08) | Refrigerating systems and heat pumps - Safety and environmental requirements Part 1: Basic requirements, definitions, classification and selection criteria (includes Amendment A2:2012) | 2012-08-01 | |||
| DIN EN 378-4 (2008-06) | Refrigerating systems and heat pumps - Safety and environmental requirements Part 4: Operation, maintenance, repair and recovery | 2008-06-01 | |||
| DIN ISO 7619-1 (2012-02) | Rubber, vulcanized or thermoplastic - Determination of indentation hardness Part 1: Durometer method (Shore hardness) (ISO 7619-1:2010) | 2012-02-01 | |||
| DIN 17212 (1972-08) | Flame And Induction Hardening Steels - Quality Specifications | 1972-08-01 | |||
| JIS B 1111:2017 | Cross Recessed Head Screws | 2017-03-21 | |||
| EN 61180-2:1994 | High-Voltage Test Techniques For Low-Voltage Equipment - Part 2: Test Equipment | ||||
| DIN EN 10083-2 (1996-10) | Quenched and tempered steels - Part 2: Technical delivery conditions for unalloyed quality steels (includes Amendment A1:1996); German version EN 10083-2:1991 + A1:1996 | 1996-10-01 | |||
| DIN EN 378-2 (2008-06) | Refrigerating systems and heat pumps - Safety and environmental requirements Part 2: Design, construction, testing, marking and documentation | 2008-06-01 | |||
| DR AS/NZS 2312.2 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings Part 2: Hot dip galvanizing | 2013-10-18 | |||
| JIS B 2203:1984 | Tolerances For Pipe Flanges | ||||
| DR 00258 | Guide to the protection of structural steel work by the application of corrosion-resistant coatings | ||||
| JIS B 2202:1984 | Dimensions For Pipe Flange Facing | ||||
| JIS B 2201:1984 | Pressure Ratings For Ferrous Material Pipe Flanges | ||||
| DR AS/NZS 2312.1 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings Part 1: Paint coatings | 2013-10-18 | |||
| JIS B 2210:1984 | Basic Dimensions Of Ferrous Materials Pipe Flanges | ||||
| AS 2700S-2011 | Colour Standards for general purposes - Swatches | 2011-05-11 | |||
| AS 1163-1981 | Structural steel hollow sections | ||||
| NF A04-504:1988 | Semi-finished Products Of Aluminium, Copper, Nickel And Their Alloys - Determination Of Grain Size - Iii : Copper And Copper Alloys | ||||
| AS 1163-1991/Amdt 2-1996 | Structural steel hollow sections | 1996-03-05 |
若您对上表中数据有任何疑问，请与网站联系。
