（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN 61000-4-11 2004 | Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests | ||||
| EN 61000-4-12 2006 | Electromagnetic compatibility (EMC) Part 4-12: Testing and measurement techniques - Ring wave immunity test | ||||
| IEC 60282-2 ed2.1 Consol. with am1-1997 | High-voltage fuses - Part 2: Expulsion fuses | ||||
| 吉建质〔2015〕4号 | 关于印发省建筑工程质量监督站2015年工作要点的通知 | 2015-03-17 | 2015-03-17 | ||
| EN 61000-4-13 2002 | Electromagnetic compatibility (EMC) Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests | ||||
| IEC 60282-2 ed2.0-1995 | High-voltage fuses - Part 2: Expulsion fuses | ||||
| EN 61000-4-14 1999 | Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques -Voltage fluctuation immunity test | ||||
| P-IEC 60947-5-1 ed2.1 Consol. with am1-1999 | Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices | ||||
| EN 61000-4-15 2011 | Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications | ||||
| IEC 60282-2 ed1.0-1970 | High-voltage fuses - Part 2: Expulsion and similar fuses | ||||
| EN 61000-4-16 1998 | Electromagnetic compatibility (EMC) Part 4-16: Testing and measurement techniques Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz | ||||
| 吉建安〔2015〕7号 | 关于印发2015年全省建设行业安全生产工作要点的通知 | 2015-03-16 | 2015-03-16 | ||
| EN 61000-4-17 1999 | Electromagnetic compatibility (EMC) Part 4-17: Testing and measurement techniques Ripple on d.c. input power port immunity test | ||||
| EN 61000-4-18 2007 | Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test | ||||
| IEC 60282-2-am1 ed1.0-1978 | Amendment 1 - High-voltage fuses - Part 2: Expulsion and similar fuses | ||||
| EN 61000-4-20 2010 | Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides | ||||
| IEC 60282-2-am1 ed2.0-1997 | Amendment 1 - High-voltage fuses - Part 2: Expulsion fuses | ||||
| EN 61000-4-21 2011 | Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods | ||||
| IEC 60598-2-1-am1 ed1.0-1987 | Amendment 1 - Luminaires. Part 2: Particular requirements. Section One: Fixed general purpose luminaires | 1987-01-01 | |||
| EN 61000-4-22 2011 | Electromagnetic compatibility (EMC) - Electromagnetic compatibility (EMC) - Radiated emission and immunity measurements in fully anechoic rooms (FARs) | ||||
| EN 61000-4-23 2000 | Electromagnetic compatibility (EMC) Part 4-23: Testing and measurement techniques - Test methods for protective devices for HEMP and other radiated disturbances | ||||
| IEC 60598-2-1 ed1.0-1979 | Luminaires. Part 2: Particular requirements. Section One: Fixed general purpose luminaires | 1979-01-01 | |||
| EN 61000-4-24 1997 | Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 24: Test methods for protective devices for HEMP conducted disturbance Basic EMC publication | ||||
| IEC 60947-5-2 ed3.0-2007 | Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches | ||||
| EN 61000-4-25 2002 | Electromagnetic compatibility (EMC) Part 4-25: Testing and measurement techniques HEMP immunity test methods for equipment and systems | ||||
| IEC 60287-1-1 ed2.1 Consol. with am1-2014 | Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General | ||||
| EN 61000-4-27 2000 | Electromagnetic compatibility (EMC) Part 4-27:Testing and measurement techniques-Unbalance,immunity test | ||||
| IEC 60287-1-2 ed1.0-1993 | Electric cables - Calculation of the current rating - Part 1: Current rating equations (100 % load factor) and calculations of losses - Section 2: Sheath eddy current loss factors for two circuits in flat formation | ||||
| EN 61000-4-27 A1 2009 | Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase | ||||
| P-IEC 60947-5-3 ed1.1 Consol. with am1-2005 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF) | ||||
| IEC 60287-2-1 ed1.1 Consol. with am1-2001 | Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance | ||||
| P-IEC 60947-5-3 ed1.0-1999 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF) | ||||
| IEC 60287-2-1 ed1.2 Consol. with am1&2-2006 | Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance | ||||
| P-IEC 60549 ed1.0-1976 | High-voltage fuses for the external protection of shunt power capacitors | 1976-01-01 | |||
| IEC 60287-2-1 ed1.0-1994 | Electric cables - Calculation of the current rating - Part 2: Thermal resistance - Section 1: Calculation of thermal resistance | ||||
| P-IEC 60947-5-3-am1 ed1.0-2005 | Amendment 1 - Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF) | ||||
| EN 61000-4-28 2000 | Electromagnetic compatibility (EMC) Part 4-28: Testing and measurement techniques Variation of power frequency, immunity test | ||||
| EN 61000-4-29 2000 | Electromagnetic compatibility (EMC) Part 4-29:Testing and measurement techniques-Voltage dips,short interruptions and voltage variations on d.c input power port immunity tests | ||||
| EN 61000-4-30 2009 | Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods | ||||
| EN 61000-4-34 2007 | Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase | ||||
| EN 61000-5-5 1996 | Electromagnetic compatibility (EMC) Part 5: Installation and mitigation guidelines Section 5: Specification of protective devices for HEMP conducted disturbance Basic EMC Publication | ||||
| P-IEC 60478-4 ed1.0-1976 | Stabilized power supplies, d.c. output. Part 4: Tests other than radio-frequency interference | 1976-01-01 | |||
| EN 61000-5-7 2001 | Electromagnetic compatibility (EMC) Part 5-7: Installation and mitigation guidelines - Degrees of protection by enclosures against electromagnetic disturbances (EM code) | ||||
| EN 61000-6-1 2007 | Electromagnetic compatibility (EMC) -Part 6-1: Generic standards -Immunity for residential, commercialand light-industrial environments | ||||
| EN 61000-6-2 1999 | Electromagnetic compatibility(EMC) Part 6-2:Generic standards - Immunity for industrial environments | ||||
| EN 61000-6-2 2005 | Electromagnetic compatibility (EMC) Part 6-2: Generic standards – Immunity for industrial environments | ||||
| IEC 60287-2-2 ed1.0-1995 | Electric cables - Calculation of the current rating - Part 2: Thermal resistance - Section 2: A method for calculating reduction factors for groups of cables in free air, protected from solar radiation | ||||
| EN 61000-6-3 2007 | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments | ||||
| EN 61000-6-4 2007 | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments | ||||
| IEC 60598-2-11 ed2.0-2013 | Luminaires - Part 2-11: Particular requirements - Aquarium luminaires | 2013-05-16 |
若您对上表中数据有任何疑问，请与网站联系。
