(清空日期可显示全部记录)
标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
---|---|---|---|---|---|
GB/T31471-2015 | 印制电路用金属箔通用规范 | 2015-05-15 | 2016-01-01 | ||
SANS 3001-BT20 Ed.1(2010) | Civil Engineering Test Methods - Part Bt20: Certification Of A Binder Distributor | 2010-11-30 | |||
SANS 3001-BT21 Ed.1.01(2015) | Civil Engineering Test Methods - Part Bt21: Validation Of A Binder Distributor Dipstick | 2015-02-16 | |||
GB/T31470-2015 | 俄歇电子能谱与X射线光电子能谱测试中确定检测信号对应样品区域的通则 | 2015-05-15 | 2016-01-01 | ||
SANS 3001-BT21 Ed.1(2010) | Civil Engineering Test Methods - Part Bt21: Validation Of A Binder Distributor Dipstick | 2010-11-30 | |||
GB/T31474-2015 | 电子装联高质量内部互连用助焊剂 | 2015-05-15 | 2016-01-01 | ||
SANS 3001-BT22 Ed.1(2010) | Civil Engineering Test Methods - Part Bt22: Power And Road Speed Indicator Tests For A Binder Distributor | 2010-11-30 | |||
SANS 3001-BT23 Ed.1(2010) | Civil Engineering Test Methods - Part Bt23: Pump System Performance Of A Binder Distributor | 2010-11-30 | |||
GB/T31479-2015 | 与食品接触染色纸和纸板色牢度的测定 | 2015-05-15 | 2015-12-01 | ||
SANS 3001-BT24 Ed.1.01(2015) | Civil Engineering Test Methods - Part Bt24: Measurement Of Transverse Distribution ('Bucket Test') For A Binder Distributor | 2015-02-09 | |||
SANS 3001-BT24 Ed.1(2011) | Civil Engineering Test Methods - Part Bt24: Measurement Of Transverse Distribution ('Bucket Test') For A Binder Distributor | 2011-02-09 | |||
GB/T31469-2015 | 半导体材料切削液 | 2015-05-15 | 2016-01-01 | ||
GB/T31468-2015 | 石油天然气工业管道输送系统管道延寿推荐作法 | 2015-05-15 | 2015-08-01 | ||
SANS 3001-GR11 Ed.1.02(2013) | Civil Engineering Test Methods - Part Gr11: Determination Of The Liquid Limit With The Two-Point Method | 2013-03-28 | |||
SANS 3001-GR11 Ed.1.01(2010) | Civil Engineering Test Methods - Part Gr11: Determination Of The Liquid Limit With The Two-Point Method | 2010-12-06 | |||
GB/T31467.3-2015 | 电动汽车用锂离子动力蓄电池包和系统第3部分:安全性要求与测试方法 | 2015-05-15 | 2015-05-15 | ||
SANS 3001-GR11 Ed.1(2008) | Civil Engineering Test Methods - Part Gr11: Determination Of The Liquid Limit With The Two-point Method | 2008-11-14 | |||
SANS 3001-GR10 Ed.1.02(2013) | Civil Engineering Test Methods - Part Gr10: Determination Of The One-Point Liquid Limit, Plastic Limit, Plasticity Index And Linear Shrinkage | 2013-03-28 | |||
ASTM D5614-94(2014) | Standard Test Method for Open Channel Flow Measurement of Water with Broad-Crested Weirs | 2014-01-01 | |||
GB/T31467.2-2015 | 电动汽车用锂离子动力蓄电池包和系统第2部分:高能量应用测试规程 | 2015-05-15 | 2015-05-15 | ||
安徽省人民政府令第230号 | 关于修改《安徽省森林和野生动物类型自然保护区管理办法》等规章的决定(修改安徽省人民政府令第175号安徽省建设工程勘察设计管理办法) | 2010-12-23 | 2010-12-23 | ||
SANS 3001-GR10 Ed.1.01(2011) | Civil Engineering Test Methods - Part Gr10: Determination Of The One-Point Liquid Limit, Plastic Limit, Plasticity Index And Linear Shrinkage | 2011-02-09 | |||
GB/T31467.1-2015 | 电动汽车用锂离子动力蓄电池包和系统第1部分:高功率应用测试规程 | 2015-05-15 | 2015-05-15 | ||
SANS 3001-GR10 Ed.1(2008) | Civil Engineering Test Methods - Part Gr10: Determination Of The One-point Liquid Limit, Plastic Limit, Plasticity Index And Linear Shrinkage | 2008-11-14 | |||
GB/T31466-2015 | 电动汽车高压系统电压等级 | 2015-05-15 | 2015-12-01 | ||
GB/T31465.5-2015 | 道路车辆熔断器第5部分:板型熔断器 | 2015-05-15 | 2015-12-01 | ||
SANS 5853 Ed.2(2008) | Linear Shrinkage Of Fines In Aggregates For Base-courses | 2008-07-18 | |||
SANS 5852 Ed.2(2008) | Plastic Limit And Plasticity Index Of Fines In Aggregates For Base-courses | 2008-06-20 | |||
GB/T31465.4-2015 | 道路车辆熔断器第4部分:插座式和螺栓式熔断器 | 2015-05-15 | 2015-12-01 | ||
SANS 3001-GR1 Ed.1.02(2013) | Civil Engineering Test Methods - Part Gr1: Wet Preparation And Particle Size Analysis | 2013-03-28 | |||
GB/T31465.3-2015 | 道路车辆熔断器第3部分:片式熔断器 | 2015-05-15 | 2015-12-01 | ||
SANS 3001-GR1 Ed.1.01(2011) | Civil Engineering Test Methods - Part Gr1: Wet Preparation And Particle Size Analysis | 2011-02-22 | |||
SANS 3001-GR1 Ed.1(2008) | Civil Engineering Test Methods - Part Gr1: Wet Preparation And Particle Size Analysis | 2008-11-28 | |||
GB/T31465.2-2015 | 道路车辆熔断器第2部分:用户指南 | 2015-05-15 | 2015-12-01 | ||
SANS 3001-GR2 Ed.1(2009) | Civil Engineering Test Methods - Part Gr2: Dry Preparation And Dry Particle Size Analysis Of Graded Materials | 2009-02-27 | |||
SANS 3001-GR2 Ed.1.01(2011) | Civil Engineering Test Methods - Part Gr2: Dry Preparation And Dry Particle Size Analysis Of Gravels And Sands | 2011-03-31 | |||
GB/T31465.1-2015 | 道路车辆熔断器第1部分:定义和通用试验要求 | 2015-05-15 | 2015-12-01 | ||
ASTM D5640-95(2014) | Standard Guide for Selection of Weirs and Flumes for Open-Channel Flow Measurement of Water | ||||
GB/T31464-2015 | 电网运行准则 | 2015-05-15 | 2015-12-01 | ||
SANS 3001-GR12 Ed.1.02(2013) | Civil Engineering Test Methods - Part Gr12: Determination Of The Flow Curve Liquid Limit | 2013-03-28 | |||
SANS 3001-GR12 Ed.1.01(2010) | Civil Engineering Test Methods - Part Gr12: Determination Of The Flow Curve Liquid Limit | 2010-12-06 | |||
GB/T31462-2015 | 500kV和750kV级分级式可控并联电抗器本体技术规范 | 2015-05-15 | 2015-12-01 | ||
SANS 3001-GR12 Ed.1(2008) | Civil Engineering Test Methods - Part Gr12: Determination Of The Flow Curve Liquid Limit | 2008-11-14 | |||
SANS 3001-GR30 Ed.1.01(2013) | Civil Engineering Test Methods - Part Gr30: Determination Of The Maximum Dry Density And Optimum Moisture Content | 2013-03-28 | |||
SANS 3001-GR30 Ed.1(2010) | Civil Engineering Test Methods - Part Gr30: Determination Of The Maximum Dry Density And Optimum Moisture Content | 2010-06-25 | |||
SANS 3001-GR3 Ed.1.01(2014) | Civil Engineering Test Methods - Part Gr3: Particle Size Analysis Of Material Smaller Than 2 Mm (Hydrometer Method) | 2014-12-18 | |||
ASTM D5674-95(2014) | Standard Guide for Operation of a Gaging Station | 2014-01-01 | |||
SANS 3001-GR3 Ed.1(2012) | Civil Engineering Test Methods - Part Gr3: Particle Size Analysis Of Material Smaller Than 2 Mm (Hydrometer Method) | 2012-10-01 | |||
SANS 3001-GR20 Ed.1.01(2010) | Civil Engineering Test Methods - Part Gr20: Determination Of The Moisture Content By Oven-Drying | 2010-12-06 | |||
SANS 3001-GR20 Ed.1(2008) | Civil Engineering Test Methods - Part Gr20: Determination Of The Moisture Content By Oven-drying | 2008-11-21 |
若您对上表中数据有任何疑问,请与网站联系。