（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| SANS 4538 Ed.1(1978/R2013) | Metallic Coatings - Thioacetamide Corrosion Test (taa Test) | ||||
| SANS 453 Ed.1(2005/R2011) | Water Quality - Determination Of The Sum Of Calcium And Magnesium - Edta Titrimetric Method | 2011-12-01 | |||
| SANS 453 Ed.1(2005) | Water Quality - Determination Of The Sum Of Calcium And Magnesium - Edta Titrimetric Method | 2005-12-02 | |||
| SANS 4526 Ed.2(2007/R2013) | Metallic Coatings - Electroplated Coatings Of Nickel For Engineering Purposes | 2013-03-28 | |||
| SANS 4526 Ed.2(2007) | Metallic Coatings - Electroplated Coatings Of Nickel For Engineering Purposes | 2007-02-23 | |||
| SANS 4541 Ed.1(1978/R2013) | Metallic And Other Non-organic Coatings - Corrodkote Corrosion Test (corr Test) | ||||
| SANS 455 Ed.4.05(2011) | Covered Electrodes For The Manual Arc Welding Of Carbon And Carbon Manganese Steels | 2011-02-09 | |||
| SANS 455 Ed.4.04(2009) | Covered Electrodes For The Manual Arc Welding Of Carbon And Carbon Manganese Steels | 2009-08-14 | |||
| SANS 455 Ed.4.03(2004) | Covered Electrodes For The Manual Arc Welding Of Carbon And Carbon Manganese Steels | 2004-05-21 | |||
| SANS 457-2 Ed.6.02(2008) | Wooden Poles, Droppers, Guardrail Posts And Spacer Blocks - Part 2: Softwood Species | 2008-03-20 | |||
| SANS 4566 Ed.1(2008/R2013) | Small Craft With Inboard Engine - Propeller Shaft Ends And Bosses With 1:10 Taper | 2013-10-28 | |||
| SANS 4566 Ed.1(2008) | Small Craft With Inboard Engine - Propeller Shaft Ends And Bosses With 1:10 Taper | 2008-05-23 | |||
| SANS 456 Ed.2.04(2009/R2014) | Corrugated Board Containers | 2014-08-08 | |||
| SANS 456 Ed.2.04(2009) | Corrugated Board Containers | 2009-07-31 | |||
| SANS 456:1973 | Corrugated Board Containers | 1973-11-14 | |||
| SANS 458 Ed.1.02(2011) | Tolerances Permitted For The Accuracy Of Measurements Of Products (Including Prepackaged Products) In Terms Of Legal Metrology Legislation | 2011-09-09 | |||
| SANS 458 Ed.1.01(2008) | Tolerances Permitted For The Accuracy Of Measurements Of Products (including Prepackaged Products) In Terms Of Legal Metrology Legislation | 2008-12-12 | |||
| SANS 458 Ed.1(2005) | Tolerances Permitted For The Accuracy Of Measurements Of Products (including Prepackaged Products) In Terms Of Legal Metrology Legislation | 2005-12-14 | |||
| DIN EN 842:2009 | Safety of machinery - Visual danger signals - General requirements, design and testing; German version EN 842:1996+A1:2008 | ||||
| DIN 33404-2:1979 | Danger signals for work places; optic danger signals, terms and definitions, technical requirements of safety, testing | ||||
| DIN 51110-3:1993 | Testing of advanced technical ceramics; 4-point-bending test; statistical evaluation; determination of the Weibull-parameters | ||||
| SANS 457-3 Ed.7(2013) | Wooden Poles, Droppers, Guardrail Posts And Spacer Blocks - Part 3: Hardwood Species | 2013-07-12 | |||
| SANS 457-3 Ed.6(2000) | Wooden Poles, Droppers, Guardrail Posts And Spacer Blocks - Part 3: Hardwood Species | 2000-12-18 | |||
| SANS 4586-2 Ed.2(2013) | High-Pressure Decorative Laminates - Sheets Made From Thermosetting Resins - Part 2: Determination Of Properties | 2013-10-28 | |||
| SANS 4586-2 Ed.1(1997) | High-pressure Decorative Laminates - Sheets Made From Thermosetting Resins - Part 2: Determination Of Properties | 1997-08-25 | |||
| SANS 4586-1 Ed.2(2013) | High-Pressure Decorative Laminates - Sheets Made From Thermosetting Resins - Part 1: Classification And Specifications | 2013-10-28 | |||
| DIN 68256:1976 | Quality characteristics of sawn timber; terms and definitions | ||||
| SANS 4586-1 Ed.1(1995) | High-pressure Decorative Laminates - Sheets Made From Thermosetting Resins - Part 1: Classification And Specifications | ||||
| SANS 459 Ed.1.05(2008/R2014) | Lime For Chemical And Metallurgical Purposes | 2014-02-14 | |||
| SANS 459 Ed.1.05(2008) | Lime For Chemical And Metallurgical Purposes | 2008-04-25 | |||
| SANS 4591 Ed.1(2003) | Plastics - Film And Sheeting - Determination Of Average Thickness Of A Sample, And Average Thickness And Yield Of A Roll, By Gravimetric Techniques (gravimetric Thickness) | 2003-03-28 | |||
| SANS 4593 Ed.1(2003) | Plastics - Film And Sheeting - Determination Of Thickness By Mechanical Scanning | 2003-12-05 | |||
| SANS 460 Ed.4.02(2011) | Plain-Ended Solid Drawn Copper Tubes For Potable Water | 2011-08-23 | |||
| SANS 460 Ed.4.01(2009) | Plain-ended Solid Drawn Copper Tubes For Potable Water | 2009-05-22 | |||
| SANS 460 Ed.4(2003) | Plain-ended Solid Drawn Copper Tubes For Potable Water | 2003-06-06 | |||
| DIN EN 845-2:2013 | Specification for ancillary components for masonry - Part 2: Lintels; German version EN 845-2:2013 | ||||
| SANS 4628-1 Ed.2(2004/R2014) | Paints And Varnishes - Evaluation Of Degradation Of Coatings - Designation Of Quantity And Size Of Defects, And Of Intensity Of Uniform Changes In Appearance - Part 1: General Introduction And Designation System | 2014-03-07 | |||
| SANS 4628-1 Ed.2(2004) | Paints And Varnishes - Evaluation Of Degradation Of Coatings - Designation Of Quantity And Size Of Defects, And Of Intensity Of Uniform Changes In Appearance - Part 1: General Introduction And Designation System | 2004-10-22 | |||
| 关于印发《宁夏建筑工程施工模板支撑体系及脚手架工程安全管理规定》的通知 | 2015-05-04 | 2015-05-04 | |||
| SANS 4624 Ed.1(2008/R2014) | Paints And Varnishes - Pull-Off Test For Adhesion | 2014-03-07 | |||
| DIN EN 845-3:2013 | Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork; German version EN 845-3:2013 | ||||
| 宁建(建)字〔2006〕5号 | 关于加强施工现场钢管、扣件使用管理的通知 | 2006-01-01 | 2006-01-01 | 2015-05-04 | |
| SANS 4624 Ed.1(2008) | Paints And Varnishes - Pull-off Test For Adhesion | 2008-01-18 | |||
| SANS 462 Ed.1(2005/R2011) | Welded Wire Fabric Gabions And Gabion Mattresses (Metallic-Coated Or Polyvinyl Chloride (Pvc) Coated) | 2012-12-01 | |||
| SANS 462 Ed.1(2005) | Welded Wire Fabric Gabions And Gabion Mattresses (metallic-coated Or Polyvinyl Chloride (pvc) Coated) | 2005-11-04 | |||
| SANS 4628-4 Ed.2(2004/R2014) | Paints And Varnishes - Evaluation Of Degradation Of Coatings - Designation Of Quantity And Size Of Defects, And Of Intensity Of Uniform Changes In Appearance - Part 4: Assessment Of Degree Of Cracking | 2014-03-20 | |||
| 宁建发〔2015〕32号 | 关于做好棚户区改造货币安置工作的指导意见 | 2015-04-28 | 2015-04-28 | ||
| SANS 4628-4 Ed.2(2004) | Paints And Varnishes - Evaluation Of Degradation Of Coatings - Designation Of Quantity And Size Of Defects, And Of Intensity Of Uniform Changes In Appearance - Part 4: Assessment Of Degree Of Cracking | 2004-10-22 | |||
| DIN EN 846-4:2002 | Methods of test for ancillary components for masonry - Part 4: Determination of load capacity and load-deflection characteristics of straps; German version EN 846-4:2001 | ||||
| SANS 4628-3 Ed.2(2004/R2014) | Paints And Varnishes - Evaluation Of Degradation Of Coatings - Designation Of Quantity And Size Of Defects, And Of Intensity Of Uniform Changes In Appearance - Part 3: Assessment Of Degree Of Rusting | 2014-03-14 |
若您对上表中数据有任何疑问，请与网站联系。
