（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 2684:1975 | Withdrawal of ISO 2684-1975 | ||||
| ISO 18213-6:2008 | Nuclear fuel technology -- Tank calibration and volume determination for nuclear materials accountancy -- Part 6: Accurate in-tank determination of liquid density in accountancy tanks equipped with dip tubes | ||||
| ISO 21483:2013 | Determination of solubility in nitric acid of plutonium in unirradiated mixed oxide fuel pellets (U, Pu) O2 | ||||
| ISO 815-1:2008 | Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 1: At ambient or elevated temperatures | ||||
| ISO 22765:2016 | Nuclear fuel technology -- Sintered (U,Pu)O2 pellets -- Guidance for ceramographic preparation for microstructure examination | ||||
| ISO 14951-9:1999/Cor 1:2000 | |||||
| ISO 26062:2010 | Nuclear technology -- Nuclear fuels -- Procedures for the measurement of elemental impurities in uranium- and plutonium-based materials by inductively coupled plasma mass spectrometry | ||||
| ISO 27467:2009 | Nuclear criticality safety -- Analysis of a postulated criticality accident | ||||
| ISO/TR 10476:1990 | Doorsets -- Assessment of burglar-proofness | ||||
| ISO 650:1977 | Relative density 60/60 degrees F hydrometers for general purposes | ||||
| ISO 4266-4:2002 | Petroleum and liquid petroleum products -- Measurement of level and temperature in storage tanks by automatic methods -- Part 4: Measurement of temperature in atmospheric tanks | ||||
| ISO 4512:2000 | Petroleum and liquid petroleum products -- Equipment for measurement of liquid levels in storage tanks -- Manual methods | ||||
| ISO 5024:1976 | Petroleum liquids and gases -- Measurement -- Standard reference conditions | ||||
| ISO 6551:1982 | Petroleum liquids and gases -- Fidelity and security of dynamic measurement -- Cabled transmission of electric and/or electronic pulsed data | ||||
| ISO 6578:1991 | Refrigerated hydrocarbon liquids -- Static measurement -- Calculation procedure | ||||
| ISO 2444:1988 | Joints in building -- Vocabulary | ||||
| ISO/FDIS 10140-4 | Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 4: Measurement procedures and requirements | ||||
| ISO 10140-5:2010 | Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 5: Requirements for test facilities and equipment | ||||
| ISO 28079:2009 | Hardmetals -- Palmqvist toughness test | ||||
| ISO 2591-1:1988 | Test sieving -- Part 1: Methods using test sieves of woven wire cloth and perforated metal plate | ||||
| ISO 9934-1:2016 | Non-destructive testing -- Magnetic particle testing -- Part 1: General principles | ||||
| ISO 18251-1:2017 | Non-destructive testing -- Infrared thermography -- Part 1: Characteristics of system and equipment | ||||
| ISO 16750-2:2006 | Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 2: Electrical loads | ||||
| ISO/AWI 11992-1 | Road vehicles -- Interchange of digital information on electrical connections between towing and towed vehicles -- Part 1: Physical and data-link layers | ||||
| ISO 11898-2:2016 | Road vehicles -- Controller area network (CAN) -- Part 2: High-speed medium access unit | ||||
| ISO 18175:2004 | Non-destructive testing -- Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments | ||||
| ISO 3310-2:1990 | Test sieves -- Technical requirements and testing -- Part 2: Test sieves of perforated metal plate | ||||
| ISO 20669:2017 | Non-destructive testing -- Pulsed eddy current testing of ferromagnetic metallic components | ||||
| ISO/CD 20769-2 | Non-destructive testing -- Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays -- Part 2: Double wall radiographic inspection | ||||
| ISO/CD 20769-1 | Non-destructive testing -- Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays -- Part 1: Tangential radiographic inspection | ||||
| ISO 20807:2004 | Non-destructive testing -- Qualification of personnel for limited application of non-destructive testing | ||||
| ISO 11992-2:1998 | Road vehicles -- Electrical connections between towing and towed vehicles -- Interchange of digital information -- Part 2: Application layer for braking equipment | ||||
| ISO 1106-2:1985 | Recommended practice for radiographic examination of fusion welded joints -- Part 2: Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness | ||||
| ISO 4039:1977 | Road vehicles -- Pneumatic braking systems -- Pipes, tapped holes and male fittings | ||||
| ISO 2437:1972 | Recommended practice for the X-ray inspection of fusion welded butt joints for aluminium and its alloys and magnesium and its alloys 5 to 50 mm thick | ||||
| ISO 4986:2010 | Steel castings -- Magnetic particle inspection | ||||
| ISO 4993:2009 | Steel and iron castings -- Radiographic inspection | ||||
| ISO 5579:1985 | Non-destructive testing -- Radiographic examination of metallic materials by X- and gamma rays -- Basic rules | ||||
| ISO/CD 4992-1 | Steel castings -- Ultrasonic examination -- Part 1: Steel castings for general purposes | ||||
| ISO 5579:2013 | Non-destructive testing -- Radiographic testing of metallic materials using film and X- or gamma rays -- Basic rules | ||||
| ISO 9302:1989 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Electromagnetic testing for verification of hydraulic leak-tightness | ||||
| ISO 11979-8:1999 | Ophthalmic implants -- Intraocular lenses -- Part 8: Fundamental requirements | ||||
| ISO 9303:1989 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Full peripheral ultrasonic testing for the detection of longitudinal imperfections | ||||
| ISO 4927:1978 | Road vehicles -- Elastomeric boots for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C maximum) | ||||
| ISO 17577:2006 | Steel -- Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm | ||||
| ISO/TR 11688-2:1998 | Acoustics -- Recommended practice for the design of low-noise machinery and equipment -- Part 2: Introduction to the physics of low-noise design | ||||
| ISO/NP 7788 | Steel -- Surface finish of hot-rolled plates and wide flats -- Delivery requirements | ||||
| ISO 565:1990 | Test sieves -- Metal wire cloth, perforated metal plate and electroformed sheet -- Nominal sizes of openings | ||||
| ISO 3310-1:1982 | Test sieves -- Technical requirements and testing -- Part 1: Test sieves of metal wire cloth | ||||
| ISO 3310-1:2016 | Test sieves -- Technical requirements and testing -- Part 1: Test sieves of metal wire cloth |
若您对上表中数据有任何疑问，请与网站联系。
