（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 4126-10:2010 | Safety devices for protection against excessive pressure -- Part 10: Sizing of safety valves for gas/liquid two-phase flow | ||||
| ISO 9404-1:1991 | Enclosures for protection against ionizing radiation -- Lead shielding units for 150 mm, 200 mm and 250 mm thick walls -- Part 1: Chevron units of 150 mm and 200 mm thickness | ||||
| ISO 12807:1996 | Safe transport of radioactive materials -- Leakage testing on packages | ||||
| ISO 18213-3:2009 | Nuclear fuel technology -- Tank calibration and volume determination for nuclear materials accountancy -- Part 3: Statistical methods | ||||
| ISO 6353-3:1987 | Reagents for chemical analysis -- Part 3: Specifications -- Second series | ||||
| ISO 3507:1976 | Pyknometers | ||||
| ISO 3507:1999 | Laboratory glassware -- Pyknometers | ||||
| ISO 8655-1:2002/Cor 1:2008 | |||||
| ISO/DIS 2714 | Liquid hydrocarbons -- Volumetric measurement by displacement meter | ||||
| ISO 1925:1990 | Mechanical vibration -- Balancing -- Vocabulary | ||||
| ISO 1940-2:1997 | Mechanical vibration -- Balance quality requirements of rigid rotors -- Part 2: Balance errors | ||||
| ISO 6507-3:1997 | Metallic materials -- Vickers hardness test -- Part 3: Calibration of reference blocks | ||||
| ISO/DIS 6507-3 | Metallic materials -- Vickers hardness test -- Part 3: Calibration of reference blocks | ||||
| ISO/DIS 6507-4 | Metallic materials -- Vickers hardness test -- Part 4: Tables of hardness values | ||||
| ISO 6892:1984 | Metallic materials -- Tensile testing | ||||
| ISO 5173:1981 | Fusion welded butt joints in steel -- Transverse root and face bend test | ||||
| ISO 8494:2013 | Metallic materials -- Tube -- Flanging test | ||||
| ISO/TR 10108:1989 | Steel -- Conversion of hardness values to tensile strength values | ||||
| ISO 10275:1993 | Metallic materials -- Sheet and strip -- Determination of tensile strain hardening exponent | ||||
| ISO 12106:2017 | Metallic materials -- Fatigue testing -- Axial-strain-controlled method | ||||
| ISO 12107:2003 | Metallic materials -- Fatigue testing -- Statistical planning and analysis of data | ||||
| ISO/DTR 12112 | Metallic materials -- Fatigue testing -- Multi-axis fatigue testing method | ||||
| ISO 12135:2002 | Metallic materials -- Unified method of test for the determination of quasistatic fracture toughness | ||||
| ISO/TR 12735-1:1996 | Mechanical testing of metals -- Symbols used with their definitions -- Part 1: Symbols and definitions in published standards | ||||
| ISO 14317:2006 | Sintered metal materials excluding hardmetals -- Determination of compressive yield strength | ||||
| ISO 14556:2015 | Metallic materials -- Charpy V-notch pendulum impact test -- Instrumented test method | ||||
| ISO 1996-1:1982 | Acoustics -- Description and measurement of environmental noise -- Part 1: Basic quantities and procedures | ||||
| ISO/AWI 14033 | Environmental management -- Quantitative environmental information -- Guidelines and examples | ||||
| ISO 14317:2015 | Sintered metal materials excluding hardmetals -- Determination of compressive yield strength | ||||
| ISO 14577-4:2016 | Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 4: Test method for metallic and non-metallic coatings | ||||
| ISO 15363:2000 | Metallic materials -- Tube ring hydraulic pressure test | ||||
| ISO 15579:2000 | Metallic materials -- Tensile testing at low temperature | ||||
| ISO 2631:1978 | Guide for the evaluation of human exposure to whole-body vibration | ||||
| ISO/TS 16630:2003 | Metallic materials -- Method of hole expanding test | ||||
| ISO 16808:2014 | Metallic materials -- Sheet and strip -- Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems | ||||
| ISO 28927-5:2009/Amd 1:2015 | Feed force | ||||
| ISO 19819:2004 | Metallic materials -- Tensile testing in liquid helium | ||||
| ISO/CD 20064 | Test method for brittle crack arrst toughness, Kca | ||||
| ISO 28927-8:2009/CD Amd 2 | |||||
| ISO 18081:2016 | Non-destructive testing -- Acoustic emission testing (AT) -- Leak detection by means of acoustic emission | ||||
| ISO 20339:2017 | Non-destructive testing -- Equipment for eddy current examination -- Array probe characteristics and verification | ||||
| ISO/DIS 20486 | Non-destructive testing -- Leak testing -- Calibration of reference leaks for gases | ||||
| ISO/R 1106:1969 | Recommended practice for radiographic inspection of fusion welded butt joints for steel plates up to 50 mm (2 in) thick | ||||
| ISO 5817:1992 | Arc-welded joints in steel -- Guidance on quality levels for imperfections | ||||
| ISO 5817:2003 | Welding -- Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) -- Quality levels for imperfections | ||||
| ISO 10675-1:2008 | Non-destructive testing of welds -- Acceptance levels for radiographic testing -- Part 1: Steel, nickel, titanium and their alloys | ||||
| ISO 4987:1992 | Steel castings -- Penetrant inspection | ||||
| ISO 16063-15:2006 | Methods for the calibration of vibration and shock transducers -- Part 15: Primary angular vibration calibration by laser interferometry | ||||
| ISO 10893-9:2011 | Non-destructive testing of steel tubes -- Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes | ||||
| ISO 11971:1997 | Visual examination of surface quality of steel castings |
若您对上表中数据有任何疑问，请与网站联系。
