（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO/IEC CD 20924 | Information technology -- Internet of Things (IoT) -- Definition and vocabulary | ||||
| ISO 5837-1:1985 | Implants for surgery -- Intramedullary nailing systems -- Part 1: Intramedullary nails with cloverleaf or V-shaped cross-section | ||||
| ISO 6475-2:1980 | Implants for surgery -- Metal bone screws -- Mechanical requirements and methods of test -- Part 2: Screws with asymmetrical thread, constant fitting (spherical), stainless steel | ||||
| ISO 6475:1989 | Implants for surgery -- Metal bone screws with asymmetrical thread and spherical under-surface -- Mechanical requirements and test methods | ||||
| ISO 7199:2009 | Cardiovascular implants and artificial organs -- Blood-gas exchangers (oxygenators) | ||||
| ISO 13959:2002 | Water for haemodialysis and related therapies | ||||
| ISO 14243-2:2000 | Implants for surgery -- Wear of total knee-joint prostheses -- Part 2: Methods of measurement | ||||
| ISO 15675:2016 | Cardiovascular implants and artificial organs -- Cardiopulmonary bypass systems -- Arterial blood line filters | ||||
| ISO 18241:2016 | Cardiovascular implants and extracorporeal systems -- Cardiopulmonary bypass systems -- Venous bubble traps | ||||
| ISO/DIS 18531 | Implants for surgery -- Calcium phosphate bioceramics -- Characterization of hardening bone paste materials | ||||
| ISO 22523:2006 | External limb prostheses and external orthoses -- Requirements and test methods | ||||
| ISO 22675:2016 | Prosthetics -- Testing of ankle-foot devices and foot units -- Requirements and test methods | ||||
| ISO 23317:2012 | Implants for surgery -- In vitro evaluation for apatite-forming ability of implant materials | ||||
| ISO 3010:2001 | Basis for design of structures -- Seismic actions on structures | ||||
| ISO 23317:2014 | Implants for surgery -- In vitro evaluation for apatite-forming ability of implant materials | ||||
| ISO/DIS 23500-3 | Guidance for the preparation and quality management of fluids for haemodialysis and related therapies -- Part 3: Water for haemodialysis and related therapies | ||||
| ISO/DIS 23500-2 | Guidance for the preparation and quality management of fluids for haemodialysis and related therapies -- Part 2: Water treatment equipment for haemodialysis applications and related therapies | ||||
| ISO/DIS 23500-5 | Guidance for the preparation and quality management of fluids for haemodialysis and related therapies -- Part 5: Quality of dialysis fluid for haemodialysis and related therapies | ||||
| ISO/TS 23810:2006 | Cardiovascular implants and artificial organs -- Checklist for preoperative extracorporeal circulation equipment setup | ||||
| ISO 29783-2:2015 | Prosthetics and orthotics -- Vocabulary -- Part 2: Prosthetic gait | ||||
| ISO/TR 4467:1982 | Addendum modification of the teeth of cylindrical gears for speed-reducing and speed-increasing gear pairs | ||||
| ISO 6336-2:1996/Cor 1:1998 | |||||
| ISO 6336-3:1996/Cor 1:1999 | |||||
| ISO 10300-1:2014 | Calculation of load capacity of bevel gears -- Part 1: Introduction and general influence factors | ||||
| ISO/NP 10825 | Gears -- Wear and damage to gear teeth -- Terminology | ||||
| ISO 2176:1995/Cor 1:2001 | |||||
| ISO 4412-3:1991 | Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 3: Pumps -- Method using a parallelepiped microphone array | ||||
| ISO 2928:2003 | Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) -- Specification | ||||
| ISO 8085-2:2001/Cor 2:2008 | |||||
| ISO 12490:2011 | Petroleum and natural gas industries -- Mechanical integrity and sizing of actuators and mounting kits for pipeline valves | ||||
| ISO/IEC 10175-1:1996/Cor 3:1998 | |||||
| ISO 14692-3 | Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 3: System design | ||||
| ISO/DIS 20088-3 | Determination of the resistance to cryogenic spillage of insulation materials -- Part 3: Jet release | ||||
| ISO 3069:2000 | End-suction centrifugal pumps -- Dimensions of cavities for mechanical seals and for soft packing | ||||
| ISO 9908:1993/Amd 1:2011 | |||||
| ISO 4392-2:1988 | Hydraulic fluid power -- Determination of characteristics of motors -- Part 2: Startability | ||||
| ISO 4392-2:2002 | Hydraulic fluid power -- Determination of characteristics of motors -- Part 2: Startability | ||||
| ISO 10703:1997 | Water quality -- Determination of the activity concentration of radionuclides by high resolution gamma-ray spectrometry | ||||
| ISO 1607-2:1978 | Positive displacement vacuum pumps -- Measurement of performance characteristics -- Part 2: Measurement of ultimate pressure | ||||
| ISO 1607-1:1980 | Positive-displacement vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed) | ||||
| ISO/DIS 12759-3 | Fans -- Efficiency classification for fans -- Part 3: Fans without drives at maximum operating speed | ||||
| ISO 13347-1:2004/Amd 1:2010 | |||||
| ISO 13347-3:2004/Cor 1:2006 | |||||
| ISO 13351:2009 | Fans -- Dimensions | ||||
| ISO 16358-2:2013/Cor 1:2013 | |||||
| ISO/DIS 18326 | Single-duct portable airconditioners and heat pumps -- Testing and rating for performance | ||||
| ISO 10294-3:1999 | Fire resistance tests -- Fire dampers for air distribution systems -- Part 3: Guidance on the test method | ||||
| ISO/CD 15714 | Method to evaluate the UV dose of in-duct UVGI air disinfection facilities | ||||
| ISO 7441:2015 | Corrosion of metals and alloys -- Determination of bimetallic corrosion in atmospheric exposure corrosion tests | ||||
| ISO 7539-7:2005 | Corrosion of metals and alloys -- Stress corrosion testing -- Part 7: Method for slow strain rate testing |
若您对上表中数据有任何疑问，请与网站联系。
