（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 14146:2000 | Radiation protection -- Criteria and performance limits for the periodic evaluation of processors of personal dosemeters for X and gamma radiation | ||||
| ISO 13166:2014 | Water quality -- Uranium isotopes -- Test method using alpha-spectrometry | ||||
| ISO 15382:2002 | Nuclear energy -- Radiationprotection -- Procedure for radiation protection monitoring in nuclear installations for external exposure to weakly penetrating radiation, especially to beta radiation | ||||
| ISO 13408-6:2005/Amd 1:2013 | |||||
| ISO 16637:2016 | Radiological protection -- Monitoring and internal dosimetry for staff members exposed to medical radionuclides as unsealed sources | ||||
| ISO 17099:2014 | Radiological protection -- Performance criteria for laboratories using the cytokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry | ||||
| ISO 17874-1:2010 | Remote handling devices for radioactive materials -- Part 1: General requirements | ||||
| ISO 11040-6:2012 | Prefilled syringes -- Part 6: Plastic barrels for injectables | ||||
| ISO 17874-2:2004 | Remote-handling devices for radioactive materials -- Part 2: Mechanical master-slave manipulators | ||||
| ISO/PRF TR 41013 | Facility management -- Scope, key concepts and benefits | ||||
| ISO 976:1977 | Rubber latices -- Determination of pH | ||||
| ISO 18310-1:2017 | Measurement and prediction of the ambient dose equivalent from patients receiving iodine 131 administration after thyroid ablation -- Part 1: During the hospitalization | ||||
| ISO 19238:2004 | Radiation protection -- Performance criteria for service laboratories performing biological dosimetry by cytogenetics | ||||
| ISO/IEC 10373-1:1998/Cor 1:2002 | |||||
| ISO 17874-3:2011 | Remote handling devices for radioactive materials -- Part 3: Electrical master-slave manipulators | ||||
| ISO 19238:2014 | Radiological protection -- Performance criteria for service laboratories performing biological dosimetry by cytogenetics | ||||
| ISO/DIS 19461-1 | Radiological protection -- Measurement for the clearance of waste contaminated with radioisotopes for medical application -- Part 1: Measurement of radioactivity | ||||
| ISO/IEC 15693-3:2009/Amd 2:2015 | Clarification of use of Data Elements | ||||
| ISO/CD 20042 | Measurement of radioactivity - Gamma emitting radionuclides - Generic test method using gamma spectrometry | ||||
| ISO 20553:2006 | Radiation protection -- Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material | ||||
| ISO 20785-2:2011 | Dosimetry for exposures to cosmic radiation in civilian aircraft -- Part 2: Characterization of instrument response | ||||
| ISO/CD 20785-4 | Dosimetry for exposures to cosmic radiation in civilian aircraft -- Part 4: Qualification of codes used for individual monitoring for aircrew members | ||||
| ISO 21909:2005 | Passive personal neutron dosemeters -- Performance and test requirements | ||||
| ISO/CIE 28077:2016 | Photocarcinogenesis action spectrum (non-melanoma skin cancers) | ||||
| ISO/IEC 19794-5:2005/CD Cor 5 | |||||
| ISO 4037-1:1996 | X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy -- Part 1: Radiation characteristics and production methods | ||||
| ISO/DIS 4037-2 | Radiological protection -- X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy -- Part 2: Dosimetry for radiation protection over the energy ranges from 8 keV to 1,3 MeV and 4 MeV to 9 MeV | ||||
| ISO 6980:1996 | Reference beta radiations for calibrating dosemeters and dose-rate meters and for determining their response as a function of beta-radiation energy | ||||
| ISO 8529-3:1998 | Reference neutron radiations -- Part 3: Calibration of area and personal dosimeters and determination of response as a function of energy and angle of incidence | ||||
| ISO 10647:1996 | Procedures for calibrating and determining the response of neutron-measuring devices used for radiation protection purposes | ||||
| ISO/IEC CD 20027 | Biometrics interoperability profiles -- Best practices for slap tenprint captures | ||||
| ISO 11665-2:2012 | Measurement of radioactivity in the environment -- Air: radon-222 -- Part 2: Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products | ||||
| ISO/IEC 24727-3:2008/Cor 1:2010 | |||||
| ISO/IEC CD 24787 | Information technology -- Identification cards -- On-card biometric comparison | ||||
| ISO 2441:1975 | Pipeline flanges for general use -- Shapes and dimensions of pressure-tight surfaces | ||||
| ISO 11665-11:2016 | Measurement of radioactivity in the environment -- Air: radon-222 -- Part 11: Test method for soil gas with sampling at depth | ||||
| ISO/DTS 11665-13 | Measurement of radioactivity in the environment -- Air: radon 222 -- Part 13: Determination of the diffusion coefficient in waterproof materials: membrane two-side activity concentration measurement method | ||||
| ISO/DTS 11665-12 | Measurement of radioactivity in the environment -- Air : radon 222 -- Part 12: Determination of the diffusion coefficient in waterproof materials: membrane one-side activity concentration measurement method | ||||
| ISO 11929-5:2005 | Determination of the detection limit and decision threshold for ionizing radiation measurements -- Part 5: Fundamentals and applications to counting measurements on filters during accumulation of radioactive material | ||||
| ISO/IEC 29109-1:2009/Cor 1:2010 | |||||
| ISO/IEC 13818-4:1998/Amd 3:2000/Cor 1:2003 | |||||
| ISO/DIS 21503 | Project, programme and portfolio management -- Guidance on programme management | ||||
| ISO 11929-6:2005 | Determination of the detection limit and decision threshold for ionizing radiation measurements -- Part 6: Fundamentals and applications to measurements by use of transient mode | ||||
| ISO 11929-8:2005 | Determination of the detection limit and decision threshold for ionizing radiation measurements -- Part 8: Fundamentals and application to unfolding of spectrometric measurements without the influence of sample treatment | ||||
| ISO 4063:1978 | Welding, brazing, braze welding and soldering of metals -- List of processes, for symbolic representation on drawings | ||||
| ISO 13160:2012 | Water quality -- Strontium 90 and strontium 89 -- Test methods using liquid scintillation counting or proportional counting | ||||
| ISO 13162:2011 | Water quality -- Determination of carbon 14 activity -- Liquid scintillation counting method | ||||
| ISO 18589-4:2009 | Measurement of radioactivity in the environment -- Soil -- Part 4: Measurement of plutonium isotopes (plutonium 238 and plutonium 239 + 240) by alpha spectrometry | ||||
| ISO/CD 18589-4 | Measurement of radioactivity in the environment -- Soil -- Part 4: Measurement of plutonium isotopes (plutonium 238 and plutonium 239 + 240) by alpha spectrometry | ||||
| ISO 9606-1:2012/Cor 1:2012 |
若您对上表中数据有任何疑问，请与网站联系。
