（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO/NP 28057 | Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy | ||||
| ISO 8298:1987 | Determination of plutonium in nitric acid solutions -- Method by oxidation by cerium(IV), reduction by iron(II) ammonium sulfate and amperometric back-titration with potassium dichromate | ||||
| ISO 8299:2005 | Nuclear fuel technology -- Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry | ||||
| ISO 8300:1987 | Determination of plutonium content in plutonium dioxide (PuO2) of nuclear grade quality -- Gravimetric method | ||||
| ISO 9005:2007 | Nuclear energy -- Uranium dioxide powder and sintered pellets -- Determination of oxygen/uranium atomic ratio by the amperometric method | ||||
| ISO 9161:2004 | Uranium dioxide powder -- Determination of apparent density and tap density | ||||
| ISO 9278:2008 | Nuclear energy - Uranium dioxide pellets -- Determination of density and volume fraction of open and closed porosity | ||||
| ISO 10980:1995 | Validation of the strength of reference solutions used for measuring concentrations | ||||
| ISO 12800 | Nuclear fuel technology -- Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method | ||||
| ISO 13465:1997 | Determination of neptunium in nitric acid solutions by molecular absorption spectrophotometry | ||||
| ISO 15366-1:2014 | Nuclear fuel technology -- Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography -- Part 1: Samples containing plutonium in the microgram range and uranium in the milligram range | ||||
| ISO 7588:1983 | Road vehicles -- Relays and flashers -- Mounting and positioning dimensions of male tabs and socket apertures for relays and flashers | ||||
| ISO Guide 34:2000/Cor 1:2003 | |||||
| ISO 14595:2003/Cor 1:2005 | |||||
| ISO/R 91:1970/Add 1:1975 | |||||
| ISO 4266-3:2002 | Petroleum and liquid petroleum products -- Measurement of level and temperature in storage tanks by automatic methods -- Part 3: Measurement of level in pressurized storage tanks (non-refrigerated) | ||||
| ISO 7278-3:1986 | Liquid hydrocarbons -- Dynamic measurement -- Proving systems for volumetric meters -- Part 3: Pulse interpolation techniques | ||||
| ISO 13689:2001 | Refrigerated light hydrocarbon fluids -- Measurement of liquid levels in tanks containing liquefied gases -- Microwave-type level gauge | ||||
| ISO 16384:2012 | Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels -- Dimethylether (DME) -- Measurement and calculation on board ships | ||||
| ISO 18132-1:2006 | Refrigerated light hydrocarbon fluids -- General requirements for automatic level gauges -- Part 1: Gauges onboard ships carrying liquefied gases | ||||
| ISO 15970:2008 | Natural gas -- Measurement of properties -- Volumetric properties: density, pressure, temperature and compression factor | ||||
| ISO 717-2:2013 | Acoustics -- Rating of sound insulation in buildings and of building elements -- Part 2: Impact sound insulation | ||||
| ISO 3382:1997 | Acoustics -- Measurement of the reverberation time of rooms with reference to other acoustical parameters | ||||
| ISO 3382-3:2012 | Acoustics -- Measurement of room acoustic parameters -- Part 3: Open plan offices | ||||
| ISO 6242-3:1992 | Building construction -- Expression of users' requirements -- Part 3: Acoustical requirements | ||||
| ISO 10140-4:2010 | Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 4: Measurement procedures and requirements | ||||
| ISO 12354-4 | Building acoustics -- Estimation of acoustic performance of buildings from the performance of elements -- Part 4: Transmission of indoor sound to the outside | ||||
| ISO 16283-1:2014/FDAmd 1 | |||||
| ISO 17497-1:2004/Amd 1:2014 | |||||
| ISO/TTA 2:1997 | Tensile tests for discontinuously reinforced metal matrix composites at ambient temperatures | ||||
| ISO/CD 19488 | Acoustics -- Acoustic classification scheme for dwellings | ||||
| ISO/IEC Guide 46:1985 | Comparative testing of consumer products and related services -- General principles | ||||
| ISO 6145-9:2001/Cor 1:2002 | |||||
| ISO/R 81:1967 | Vickers hardness test for steel (Load 5 to 100 kgf) | ||||
| ISO 5838-1:1995 | Implants for surgery -- Skeletal pins and wires -- Part 1: Material and mechanical requirements | ||||
| ISO 83:1976 | Steel -- Charpy impact test (U-notch) | ||||
| ISO 2845:1975 | Set of printing inks for letterpress printing -- Colorimetric characteristics | ||||
| ISO/R 84:1959 | Izod impact test for steel | ||||
| ISO/R 85:1959 | Bend test for steel | ||||
| ISO/R 87:1959 | Simple bend testing of steel sheet and strip less than 3 mm thick | ||||
| ISO 136:1972 | Steel -- Simple torsion testing of wire | ||||
| ISO 445:1996 | Pallets for materials handling -- Vocabulary | ||||
| ISO 146:1984 | Metallic materials -- Hardness test -- Verification of Vickers hardness testing machines HV 0,2 to HV 100 | ||||
| ISO/R 445:1965 | Vocabulary of terms relating to pallets | ||||
| ISO 376:2011 | Metallic materials -- Calibration of force-proving instruments used for the verification of uniaxial testing machines | ||||
| ISO/R 397:1964 | Wrapping test for copper and copper alloy wire | ||||
| ISO/R 401:1964 | Tensile testing of copper and copper alloy tubes of circular section | ||||
| ISO/R 409:1964 | Tables of Vickers hardness values (HV) for metallic materials | ||||
| ISO/R 403:1964 | Brinell hardness test for copper and copper alloys | ||||
| ISO 726:1982 | Metallic materials -- Hardness test -- Calibration of standardized blocks to be used for Brinell hardness testing machines |
若您对上表中数据有任何疑问，请与网站联系。
