（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN 15664-1-2008 | Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 1: Design and operation | 2008-01-01 | 2013-11-27 | ||
| EN 1060-4-2004 | Non-invasive sphygmomanometers - Part 4: Test procedures to determine the overall system accuracy of automated noninvasive sphygmomanometers | ||||
| EN ISO 13934-2-1999 | Textiles - Tensile Properties of Fabrics - Part 2: Determination of Maximum Force Using the Grab Method ISO 13934-2:1999 | 1999-02-15 | 2014-02-05 | ||
| EN ISO 8780-4-1995 | Pigments and Extenders - Methods of Dispersion for Assessment of Dispersion Characteristics - Part 4: Dispersion Using a Bead Mill (ISO 8780-4: 1990) | 1995-03-21 | |||
| EN ISO 8781-2-1995 | Pigments and Extenders - Methods of Assessment of Dispersion Characteristics - Part 2: Assessment from the Change in Fineness of Grind (ISO 8781-2 : 1990) | 1995-03-21 | |||
| EN ISO 8826-1-1995 | Technical Drawings - Rolling Bearings - Part 1: General Simplified Representation (ISO 8826-1 : 1989) | 1995-01-13 | |||
| EN ISO 8871-1-2004 | Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 1: Extractables in aqueous autoclavates ISO 8871-1:2003; Supersedes EN ISO 8871:1997 | 2004-09-01 | |||
| EN ISO 8871-4-2006 | Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 4: Biological requirements and test methods ISO 8871-4:2006; Supersedes EN ISO 8871:1997 | 2006-06-15 | |||
| EN 21562:1989 | Dentistry - Dental Casting Gold Alloys | 1989-01-01 | |||
| EN ISO 8895-2006 | Shaped insulating refractory products - Determination of cold crushing strength ISO 8895: 2004;: 1995 | 2006-06-21 | |||
| EN ISO 8968-2-2001 | Milk - Determination of Nitrogen Content - Part 2: Block-Digestion Method (Macro Method) ISO 8968-2: 2001 | ||||
| EN ISO 8968-4-2001 | Milk - Determination of Nitrogen Content - Part 4: Determination of Non-Protein Nitrogen Content ISO 8968-4: 2001 | 2001-12-15 | |||
| EN ISO 10555-2-1997 | Sterile, single-use intravascular catheters Part 2: Angiographic catheters ISO 10555-2: 1996; Incorporating corrigendum July 2002 | ||||
| EN ISO 10555-4-1997 | Sterile, single-use intravascular catheters - Part 4: Balloon dilatation catheters (ISO 10555-4:1996) | ||||
| EN ISO 10563-2005 | Building construction - Sealants - Determination of change in mass and volume (ISO 10563): 2005 | ||||
| EN ISO 10565-1998 | Oilseeds - Simultaneous determination of oil and water contents - Method using pulsed nuclear magnetic resonance spectrometry (ISO 10565:1998) | ||||
| EN ISO 10591-2005 | Building construction - Sealants - Determination of adhesion/cohesion properties of sealants after immersion in water (ISO 10591:2005) | ||||
| EN ISO 11732-2005 | Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005) | ||||
| EN ISO 11734-1998 | Water Quality - Evaluation of the"Ultimate" Anaerobic Biodegradability of Organic Compounds in Digested Sludge - Method by Measurement of the Biogas Production | 1998-07-22 | |||
| EN ISO 11782-1-2008 | Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing | 2008-04-16 | |||
| EN ISO 11807-2-2005 | Integrated optics - Vocabulary - Part 2: Terms used in classification ISO 11807-2:2001 | 2005-03-02 | |||
| EN ISO 11816-1-2006 | Milk and milk products - Determination of alkaline phosphatase activity - Part 1: Fluorimetric method for milk and milk-based drinks ISO 11816-1:2006 | 2006-04-15 | 2013-11-06 | ||
| EN ISO 11819-1-2001 | Acoustics - Measurement of the Influence of Road Surface on Traffic Noise - Part 1: Statistics Pass-by Method | 2001-08-15 | |||
| EN ISO 11821-1997 | Acoustics - Measurement of the In Situ Sound Attenuation of a Removable Screen ISO 11821: 1997 | 1997-04-01 | |||
| EN ISO 11833-2-2006 | Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm | 2006-04-05 | |||
| EN ISO 13936-2-2004 | Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 2: Fixed load method ISO 13936-2:2004 | 2004-04-15 | |||
| EN ISO 13937-1-2000 | Textiles - Tear Properties of Fabrics - Part 1: Determination of Tear Force Using Ballistic Pendulum Method (Elmendorf) ISO 13937-1:2000 | 2000-04-01 | |||
| EN ISO 13937-3-2000 | Textiles - Tear Properties of Fabrics - Part 3: Determination of Tear Force of Wing-Shaped Test Specimens (Single Tear Method) ISO 13937-3:2000 | 2000-04-01 | |||
| EN ISO 13982-1-2004 | Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) ISO 13982-1: 2004 | 2004-11-15 | |||
| EN ISO 13998-2003 | Protective clothing - Aprons, trousers and vests protecting against cuts and stabs by hand knives ISO 13998: 2003; Supersedes EN 412: 1993 | ||||
| EN ISO 14020-2001 | Environmental Labels and Declarations - General Principles ISO 14020:2000 | 2001-10-24 | |||
| EN ISO 14040-2006 | Environmental management - Life cycle assessment - Principles and framework ISO 14040:2006; Supersedes EN ISO 14041:1998, EN ISO 14042:2000, EN ISO 14043:2000 | 2006-07-01 | |||
| EN ISO 14111-1999 | Natural Gas - Guidelines to Traceability in Analysis | 1999-03-24 | |||
| EN ISO 14114-1999 | Gas Welding Equipment - Acetylene Manifold Systems for Welding, Cutting and Allied Processes - General Requirements | 1999-07-01 | 2014-05-07 | ||
| EN ISO 9047-2003 | Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures [Superseded: BSI BS EN ISO 9047, BSI BS EN ISO 9047, BSI BS EN ISO 9047] | 2003-05-07 | |||
| EN ISO 9073-2-1996 | Textiles - Test Methods for Nonwovens - Part 2: Determination of Thickness Supersedes EN 29073-2 : 1992; ISO 9073-2 : 1995 | 1996-10-23 | |||
| EN ISO 9073-8-1998 | Textiles - Test Methods for Nonwovens - Part 8: Determination of Liquid Strike-Through Time (Simulated Urine) ISO 9073-8:1995 | 1998-07-22 | |||
| EN ISO 9073-10-2004 | Textiles - Test methods for nonwovens - Part 10: Lint and other particles generation in the dry state ISO 9073-10:2003 | 2004-12-22 | |||
| EN ISO 9073-14-2007 | Textiles - Test methods for nonwovens - Part 14: Coverstock wetback | 2007-02-21 | |||
| EN ISO 9073-17-2008 | Textiles - Test methods for nonwovens - Part 17: Determination of water penetration (spray impact) (ISO 9073-17:2008) | ||||
| EN ISO 9094-2-2002 | Small craft - Fire protection - Part 2: Craft with a hull length of over 15 m (ISO 9094-2:2002) | ||||
| EN ISO 9100-1-2005 | Glass containers - Vacuum lug finishes - Part 1: General (ISO 9100-1:2005) | ||||
| EN ISO 9100-3-2005 | Glass containers - Vacuum lug finishes - Part 3: 38 regular (ISO 9100-3:2005) | ||||
| EN ISO 9100-5-2005 | Glass containers - Vacuum lug finishes - Part 5: 43 and 48 regular (ISO 9100-5:2005) | ||||
| EN ISO 9100-7-2005 | Glass containers - Vacuum lug finishes - Part 7: 58 deep (ISO 9100-7:2005) | ||||
| EN ISO 9100-9-2005 | Glass containers - Vacuum lug finishes - Part 9: 63, 66 and 70 deep (ISO 9100-9:2005) | ||||
| EN ISO 9100-11-2005 | Glass containers - Vacuum lug finishes - Part 11: 82 regular (ISO 9100-11:2005) | ||||
| EN ISO 9100-13-2005 | Glass containers - Vacuum lug finishes - Part 13: 100 regular (ISO 9100-13:2005) | ||||
| EN ISO 9142-2003 | Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003) | ||||
| EN ISO 9167-1-1995 | Rapeseed - Determination of Glucosinolates Content - Part 1: Method Using High- Performance Liquid Chromatography (ISO 9167-1 : 1992) |
若您对上表中数据有任何疑问，请与网站联系。
