检索关键词：

标准分类：

发布时间：

（清空日期可显示全部记录）

标准编号 标准名称 发布日期 实施日期 废止日期 替换信息
EN 3660-013-2008 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 013: Cable outlet, style A, straight, unsealed, with cable tie strain relief - Product standard 2008-04-16
EN 3660-015-2008 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 015: Cable outlet, style A, 45 degrees, unsealed, with cable tie strain relief - Product standard 2008-04-16
EN 3660-024-2008 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 024: Grommet nut, style A, composite - Product standard 2008-04-16
EN 3661-005-2006 Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A - Part 005: With polarized signal contact - Product standard 2006-08-23
EN 3662-001-2006 Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 001: Technical specification 2006-08-23
EN 3662-006-2006 Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 006: With polarized signal contact - Bus-bar version - Product standard 2006-08-23
EN 3671-2007 Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Non heat treated - Forging stock - a or D ≤ 250 mm 2007-03-28
EN 3678-2007 Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 930 MPa 2007-03-28
EN 3114-001-2006 Aerospace series - Test method - Microstructure of (α + β) titanium alloy wrought products - Part 001: General requirements 2006-12-20
EN 3114-003-2006 Aerospace series - Test method - Microstructure of (α + β) titanium alloy wrought products - Part 003: Microstructure of plate 2006-12-20
EN 3135-1996 Aerospace series - Rivets, solid, universal head, in corrosion resisting steel FE-PA11, passivated, inch based series 1996-03-20
EN 3138-2001 Aerospace series - Rivets, solid, 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series 2001-06-20
EN 3160-2007 Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 1 310 MPa 2007-08-22
EN 3202-1995 Aerospace series - Holes and traps for T-head bolts - Design standard 1995-07-19
EN 3218-002-2006 Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 002: Specification of performance and contact arrangements 2006-04-26
EN 3218-006-2006 Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 006: Receptacle with non-removable size 22 solder contacts - Product standard 2006-04-26
EN 3218-008-2006 Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 008: Receptacle with rear-removable size 20 crimp contacts - Product standard 2006-04-26
EN 13434-2006 Devices To Prevent Pollution By Backflow Of Potable Water - Mechanical Disconnector, Hydraulic Actuated - Family G, Type B 2006-03-01
EN 13437-2003 Packaging and material recycling - Criteria for recycling methods - Description of recycling processes and flow chart 2003-05-21
EN 13439-2003 Packaging - Rate of energy recovery - Definition and method of calculation 2003-05-21
EN 13441-2001 Biotechnology - Laboratories for Research, Development and Analysis - Guidance on Containment of Genetically Modified Plants 2001-11-14
EN 13444-1-2001 Electrically Propelled Road Vehicles - Measurement of Emissions of Hybrid Vehicles - Part 1: Thermal Electric Hybrid Vehicles 2001-04-01
EN 13631-16-2004 Explosives for civil uses - High explosives - Part 16: Detection and measurement of toxic gases 2004-08-18
EN 13636-2004 Cathodic protection of buried metallic tanks and related piping 2004-07-28
EN 13674-3-2006 Railway Applications - Track - Rail - Part 3: Check Rails 2006-04-01 2010-07-07
EN 13677-3-2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements 2003-02-12
EN 13684-2004 Garden Equipment - Pedestrian Controlled Lawn Aerators And Scarifiers - Safety 2009-12-16
EN 13687-4-2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 4: Dry thermal cycling 2002-02-27
EN 13949-2003 Respiratory equipment - Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen - Requirements, testing, marking 2003-02-26
EN 13953-2003 Lpg Equipment And Accessories - Pressure Relief Valves For Transportable Refillable Cylinders For Liquefied Petroleum Gas (lpg) 2003-05-01 2007-03-28
EN 13964-2004 Suspended ceilings - Requirements and test methods 2004-03-10 2014-03-12
EN 13970-2004 Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics 2004-12-01
EN 13972-2002 Rigid plastics containers - Definition of nominal, brimful and total capacity and measurement of brimful and total capacity 2002-10-16
EN 13979-1-2003 Railway Applications - Wheelsets And Bogies - Monobloc Wheels - Technical Approval Procedure - Part 1: Forged And Rolled Wheels 2004-12-01 2011-03-16
EN 13981-3-2006 Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 3: Castings 2006-09-13
EN 13986-2004 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking 2004-10-01 2015-04-01
EN 13991-2003 Derivatives from coal pyrolysis - Coal tar based oils: creosotes - Specifications and test methods 2003-08-27
EN 13997-2003 Irrigation techniques - Connection and control accessories for use in irrigation systems - Technical characteristics and testing 2003-11-05
EN 13999-2-2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds 2007-04-11 2013-12-04
EN 13999-4-2007 Adhesives - Short Term Method For Measuring The Emission Properties Of Low-solvent Or Solvent-free Adhesives After Application - Part 4: Determination Of Volatile Diisocyanates 2007-04-01 2009-04-29
EN 14277-2006 Ventilation for buildings - Air terminal devices - Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes 2006-09-06
EN 14278-2-2004 Textiles Determination of cotton fibre stickiness Part 2: Method using an automatic thermodetection plate device 2004-03-03
EN 14279-2004 Laminated Veneer Lumber (lvl) - Definitions, Classification And Specifications 2004-12-01 2009-03-18
EN 14287-2004 Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components 2004-06-30
EN 14291-2004 Foam producing solutions for leak detection on gas installations 2004-11-10
EN 14293-2006 Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements 2006-08-02
EN 14297-2004 Chimneys - Freeze-thaw resistance test method for chimney products 2004-08-11
EN 14316-1-2004 Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation 2004-08-18
EN 14321-1-2005 Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description 2005-06-22
EN 14322-2004 Wood-based panels - Melamine faced boards for interior uses - Definition, requirements and classification 2004-03-24
776140 条记录 10145/15523 页 第一页 <上一页  10141   10142   10143   10144  10145  10146   10147   10148   10149  下一页> 最后一页

若您对上表中数据有任何疑问，请与网站联系。