（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN ISO 10253-2006 | Water quality - Marine algal growth inhibition test with Skeletonema costatum and Phaeodactylum tricornutum (ISO 10253:2006) | 2006-04-15 | |||
| EN ISO 10283-2007 | Binders for paints and varnishes - Determination of monomeric diisocyanates in isocyanate resins (ISO 10283:2007) | 2007-09-01 | |||
| EN ISO 14644-4-2001 | Cleanrooms and associated controlled environments - Part 4: Design, construction and start-up (ISO 14644-4:2001) | 2001-04-01 | |||
| EN ISO 14644-6-2007 | Cleanrooms And Associated Controlled Environments - Part 6: Vocabulary | 2007-07-01 | |||
| EN ISO 10306-1995 | Textiles - Cotton fibres - Evaluation of maturity by the air flow method (ISO 10306:1993) | 1995-04-26 | 2014-06-04 | ||
| EN ISO 10426-4-2004 | Petroleum and natural gas industries - Cements and materials for well cementing - Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure (ISO 10426-4:2004) | 2004-12-22 | |||
| EN ISO 10427-3-2004 | Petroleum and natural gas industries - Equipment for well cementing - Part 3: Performance testing of cementing float equipment (ISO 10427-3:2003) | 2004-10-27 | |||
| EN ISO 10434-2004 | Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries (ISO 10434:2004) | 2004-07-15 | |||
| EN ISO 10438-1-2007 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2007) | ||||
| EN ISO 14680-1-2006 | Paints and varnishes - Determination of pigment content - Part 1: Centrifuge method (ISO 14680-1:2000) | ||||
| EN ISO 14680-3-2006 | Paints and varnishes - Determination of pigment content - Part 3: Filtration method (ISO 14680-3:2000) | ||||
| EN ISO 14815-2005 | Road transport and traffic telematics - Automatic vehicle and equipment identification - System specifications (ISO 14815:2005) | ||||
| EN ISO 10438-3-2007 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 3: General-purpose oil systems (ISO 10438-3:2007) | ||||
| EN 196-10-2006 | Methods of testing cement - Part 10: Determination of the water-soluble chromium (VI) content of cement | ||||
| EN 203-2-2-2006 | Gas Heated Catering Equipment - Part 2-2: Specific Requirements - Ovens | ||||
| EN 203-2-4-2005 | Gas Heated Catering Equipment - Part 2-4: Specific Requirements - Fryers | ||||
| EN 203-2-7-2007 | Gas Heated Catering Equipment - Part 2-7: Specific Requirements - Salamanders And Rotisseries | ||||
| EN 203-2-9-2005 | Gas Heated Catering Equipment - Part 2-9: Specific Requirements - Solid Tops, Warming Plates And Griddles | ||||
| EN 203-2-11-2006 | Gas Heated Catering Equipment - Part 2-11: Specific Requirements - Pasta Cookers | ||||
| EN 205-2003 | Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints | ||||
| CR 14378-2002 | Ventilation for buildings - Experimental determination of mechanical energy loss coefficients of air handling components Incorporating corrigendum July 2002 | ||||
| EN 30-1-2-1999 | Domestic cooking appliances burning gas - Part 1-2: Safety - Appliances having forced-convection ovens and/or grills | 1999-07-21 | 2012-04-04 | ||
| EN 30-2-2-1999 | Domestic cooking appliances burning gas - Part 2-2: Rational use of energy - Appliances having forced-convection ovens and/or grills | 1999-07-21 | |||
| EN 47-2005 | Wood preservatives - Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) - (Laboratory method) | 2005-03-16 | |||
| EN 49-1-2005 | Wood Preservatives - Determination Of The Protective Effectiveness Against Anobium Punctatum (de Geer) By Egg-laying And Larval Survival - Part 1: Application By Surface Treatment (laboratory Method) | ||||
| EN 54-4-1997 | Fire detection and fire alarm systems - Part 4: Power supply equipment | 1997-10-22 | |||
| EN 54-24-2008 | Fire detection and fire alarm systems - Part 24: Components of voice alarm systems - Loudspeakers | 2008-04-02 | |||
| EN 583-4-2002 | Non-destructive testing - Ultrasonic examination - Part 4: Examination for discontinuities perpendicular to the surface | 2002-09-11 | 2014-03-05 | ||
| EN 586-1-1997 | Aluminium and aluminium alloys - Forgings - Part 1: Technical conditions for inspection and delivery | 1997-08-20 | |||
| EN 588-2-2001 | Fibre cement pipes for drains and sewers - Part 2: Manholes and inspection chambers | 2001-12-12 | |||
| CEN/TR 15697-2008 | Cement - Performance testing for sulfate resistance - State of the art report | 2008-04-23 | |||
| EN 113-1996 | Wood preservatives - Test method for determining the protective effectiveness against wood destroying basidiomycetes - Determination of the toxic values | 1996-09-18 | |||
| EN 132-1998 | Respiratory protective devices - Definitions of terms and pictograms | 1998-12-16 | |||
| EN 131-4-2007 | Ladders - Part 4: Single or multiple hinge-joint ladders | 2007-05-09 | |||
| EN 10255:2004 | Non-alloy Steel Tubes Suitable For Welding And Threading - Technical Delivery Conditions | 2004-08-01 | 2007-04-11 | ||
| EN 14041-2004 | Resilient, textile and laminate floor coverings - Essential characteristics Incorporating Corrigendum May 2005 and October 2006 | 2004-08-04 | |||
| EN 14276-2-2007 | Pressure Equipment For Refrigerating Systems And Heat Pumps - Part 2: Piping - General Requirements | 2011-02-23 | |||
| EN 1492-4-2004 | Textile Slings - Safety - Part 4: Lifting Slings For General Service Made From Natural And Man-made Fibre Ropes | 2004-06-01 | 2008-11-12 | ||
| EN 15188-2007 | Determination of the spontaneous ignition behaviour of dust accumulations | 2007-08-22 | |||
| EN 15241-2007 | Ventilation for buildings - Calculation methods for energy losses due to ventilation and infiltration in commercial buildings | 2007-05-16 | |||
| EN 15243-2007 | Ventilation for buildings - Calculation of room temperatures and of load and energy for buildings with room conditioning systems | 2007-08-15 | |||
| EN 15266-2007 | Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar | 2007-05-09 | |||
| EN 1760-3-2004 | Safety Of Machinery - Pressure Sensitive Protective Devices - Part 3: General Principles For The Design And Testing Of Pressure Sensitive Bumpers, Plates, Wires And Similar Devices | 2004-08-01 | 2009-03-25 | ||
| EN 1999-1-4-2007 | Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting | 2007-02-28 | |||
| EN 2349-601-2007 | Aerospace series - Requirements and test procedures for relays and contactors - Part 601: Compass safety distance | 2007-04-11 | |||
| EN 2467-2007 | Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Air melted - Softened - Plate, sheet and strip - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa | 2007-08-22 | |||
| EN 2573-2007 | Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Softened - Rm ≤ 780 MPa - Wire - 0,25 mm ≤ De ≤ 3 mm | 2007-08-22 | |||
| EN 2591-221-2007 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 221: Voltage Standing Wave Ratio (VSWR) | 2007-12-12 | |||
| EN 2941-2008 | Aerospace series - Nickel alloy rivets - Technical specification | 2008-03-26 | |||
| EN 3155-071-2007 | Aerospace series - Electrical contacts used in elements of connection - Part 071: Contacts, electrical, female, type A, crimp, class S - Product standard | 2007-12-19 | 2014-11-05 |
若您对上表中数据有任何疑问，请与网站联系。
