（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN 3660-022-2008 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 022: Cable outlet, style A, straight, composite, unsealed, with cable tie strain relief - Product standard | 2008-04-16 | |||
| EN 3733-002-2008 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous - Part 002: List of product standards | 2008-04-02 | |||
| EN 4165-001-2007 | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 001: Technical specification | 2007-04-04 | 2015-10-14 | ||
| EN 4287-2005 | Aerospace series - Aluminium alloy AL-P7010 - Forging stock | 2005-02-23 | |||
| EN 4346-2007 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted, softended, forging stock a or D ≤ 300 mm | 2007-08-29 | |||
| EN 4355-2008 | Aerospace series - Six lobe recess - Drivers, socket | 2008-03-26 | |||
| EN 4379-2007 | Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated, forging De ≤ 200 mm | 2007-11-14 | |||
| EN ISO 10424-2-2007 | Petroleum and natural gas industries - Rotary drilling equipment - Part 2: Threading and gauging of rotary shouldered thread connections (ISO 10424-2:2007) | 2007-11-15 | |||
| EN ISO 9692-3-2001 | Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2000) | 2001-03-21 | |||
| EN 12312-13-2002 | Aircraft Ground Support Equipment - Specific Requirements - Part 13: Lavatory Service Equipment | 2002-08-01 | 2009-04-29 | ||
| EN 12312-15-2006 | Aircraft Ground Support Equipment - Specific Requirements - Part 15: Baggage And Equipment Tractors | 2006-01-01 | 2009-04-29 | ||
| EN 12312-17-2004 | Aircraft Ground Support Equipment - Specific Requirements - Part 17: Air Conditioning Equipment | 2004-07-01 | 2009-04-29 | ||
| EN 12312-19-2005 | Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions Incorporates Amendment A1: 2009 | ||||
| EN 12317-1-1999 | Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of shear resistance of joints | ||||
| EN 12322-1999 | In vitro diagnostic medical devices - Culture media for microbiology - Performance criteria for culture media | ||||
| EN 12385-10 + A1-2003 | Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications | ||||
| EN 12387-2005 | Footwear, Leather And Imitation Leather Goods Manufacturing Machines - Modular Shoe Repair Equipment - Safety Requirements | ||||
| EN 12435-2006 | Health informatics - Expression of results of measurements in health sciences | ||||
| EN ISO 5810-1994 | Starches and derived products - Determination of chloride content - Potentiometric method | ||||
| EN ISO 5826-2003 | Resistance welding equipment - Transformers - General specifications applicable to all transformers (ISO 5826:1999) | ||||
| EN ISO 5983-1-2005 | Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Part 1: Kjeldahl method ISO 5983-1:2005 | ||||
| EN ISO 5999-2007 | Flexible cellular polymeric materials - Polyurethane foam for load-bearing applications excluding carpet underlay - Specification | ||||
| EN ISO 6042-2000 | Ships and Marine Technology - Weathertight Single-Leaf Steel Doors ISO 6042: 1998 | ||||
| EN ISO 6115-1996 | Shipbuilding - Trawl Winches ISO 6115 : 1988 | ||||
| EN ISO 6141-2006 | Gas analysis - Requirements for certificates for calibration gases and gas mixtures (ISO 6141:2000) | 2006-08-23 | 2015-03-04 | ||
| EN ISO 6143-2006 | Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001) | 2006-08-23 | |||
| EN ISO 6149-1-2007 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2007) | 2007-02-01 | 2007-02-21 | ||
| EN 301-2006 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements | 2006-06-21 | 2013-10-09 | ||
| EN 303-2-1998 | Heating boilers - Part 2: Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners | 1998-10-21 | |||
| EN 303-6-2000 | Heating boilers - Part 6: Heating boilers with forced draught burners - Specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW | 2000-01-19 | |||
| EN 308-1997 | Heat exchangers - Test procedures for establishing performance of air to air and flue gases heat recovery devices | 1997-01-22 | |||
| EN 310-1993 | Wood-based panels - Determination of modulus of elasticity in bending and of bending strength | 1993-02-26 | |||
| EN 313-2-1999 | Plywood - Classification and terminology - Part 2: Terminology | 1999-10-20 | |||
| EN 318-2002 | Wood based panels - Determination of dimensional changes associated with changes in relative humidity | 2002-03-20 | |||
| EN 322-1993 | Wood-based panels - Determination of moisture content | 1993-02-26 | |||
| EN 330-1993 | Wood preservatives - Field test method for determining the relative protective effectiveness of a wood preservative for use under a coating and exposed out of ground contact: L-joint method | 1993-04-08 | 2014-11-05 | ||
| EN 334-2005 | Gas Pressure Regulators For Inlet Pressures Up To 100 Bar | 2005-03-01 | 2009-01-21 | ||
| EN 1411-1996 | Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method | 1996-01-24 | |||
| EN 1414-1996 | Touch and close fasteners - Cycling procedure for subsequent testing | 1996-11-20 | |||
| EN 1418-1997 | Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials | 1997-12-17 | 2013-08-07 | ||
| EN 1492-2-2000 | Textile Slings - Safety - Part 2: Roundslings, Made Of Man-made Fibres, For General Purpose Use | 2000-07-01 | 2008-11-12 | ||
| EN 1504-1-2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions | 2005-07-27 | |||
| EN 1523-1998 | Windows, doors, shutters and blinds - Bullet resistance - Test method | 1998-10-21 | |||
| EN 4458-2005 | Aerospace series - Studs, MJ threads, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel - Strength class: 1 100 MPa (at ambient temperature) - Technical specification | 2005-11-16 | |||
| EN 4462-2007 | Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 300 MPa | 2007-06-20 | |||
| EN 4640-003-2008 | Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 003: Plug optical connector - Product standard | 2008-05-28 | |||
| EN 695-2005 | Kitchen Sinks - Connecting Dimensions | 2005-08-17 | |||
| EN 716-2-2008 | Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods | 2008-03-01 | 2013-01-09 | ||
| EN 10340-2007 | Steel castings for structural uses | 2007-10-10 | |||
| EN 1176-1-2008 | Playground equipment and surfacing - Part 1: General safety requirements and test methods | 2008-05-28 |
若您对上表中数据有任何疑问，请与网站联系。
