（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN 14198-2004 | Railway applications - Braking - Requirements for the brake system of trains hauled by a locomotive | ||||
| EN 14202-2004 | Blinds and shutters - Suitability for use of tubular and square motorizations - Requirements and test methods | ||||
| EN 14208-2004 | Transportable gas cylinders Specification for welded pressure drums up to 1 000 litre capacity for the transport of gases Design and construction | ||||
| EN 14210-2003 | Surface active agents Determination of interfacial tension of solutions of surface active agents by the stirrup or ring method | ||||
| EN 14218-2003 | Hexagon nuts with flange - Fine pitch thread ISO 10663: 1999, Modified | ||||
| EN 14220-2006 | Timber and wood-based materials in external windows, external door leaves and external doorframes - Requirements and specifications | ||||
| EN 14222-2003 | Stainless steel shell boilers | ||||
| EN 14225-1-2005 | Diving suits - Part 1: Wet suits - Requirements and test methods | 2005-03-30 | |||
| EN 14225-3-2005 | Diving suits - Part 3: Actively heated or cooled suits (systems) - Requirements and test methods | 2005-03-30 | |||
| EN 15505-2008 | Foodstuffs - Determination of trace elements - Determination of sodium and magnesium by flame atomic absorption spectrometry (AAS) after microwave digestion | 2008-03-05 | |||
| EN 15510-2007 | Animal feeding stuffs - Determination of calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum, arsenic, lead and cadmium by ICP-AES | ||||
| EN 15519-2007 | Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract | ||||
| EN 15521-2007 | Health informatics - Categorial structure for terminologies of human anatomy | ||||
| EN 14268-2005 | Irrigation techniques - Meters for irrigation water | ||||
| EN 14344-2004 | Child use and care articles - Child seats for cycles - Safety requirements and test methods | ||||
| EN 14346-2006 | Characterization of Waste - Calculation of Dry Matter by Determination of Dry Residue or Water Content | ||||
| EN 14348-2005 | Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants in the medical area including instrument disinfectants - Test methods and requirements (phase 2, step 1) | ||||
| EN 14350-1-2004 | Child use and care articles - Drinking equipment - Part 1: General and mechanical requirements and tests | ||||
| EN 14351-1-2006 | Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics Incorporates Amendment A1: 2010 | ||||
| ENV 13563-2000 | Traffic Control Equipment - Vehicle Detectors | ||||
| EN ISO 7864-1995 | Sterile Hypodermic Needles for Single Use (ISO 7864 : 1993) | ||||
| EN ISO 7886-1-1997 | Sterile Hypodermic Syringes for Single Use - Part 1: Syringes for Manual Use ISO 7886-1: 1993, Including Technical Corrigendum 1: 1995 | ||||
| EN ISO 7899-2-2000 | Water Quality - Detection and Enumeration of Intestinal Enterococci - Part 2: Membrane Filtration Method ISO 7899-2:2000 | ||||
| EN ISO 7933-2004 | Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain ISO 7933:2004; Supersedes EN 12515:1997 | ||||
| EN ISO 7944-1998 | Optics and Optical Instruments - Reference Wavelengths ISO 7944:1998 | ||||
| EN ISO 8028-2000 | Rubber and/or Plastics Hoses and Hose Assemblies for Airless Paint Spraying - Specification ISO 8028:1999; Supersedes EN 28028:1993 | ||||
| EN ISO 8033-2006 | Rubber and plastics hoses - Determination of adhesion between components ISO 8033:2006;:1993 | ||||
| EN ISO 8044-1999 | Corrosion of Metals and Alloys - Basic Terms and Definitions ISO 8044: 1999 | ||||
| EN ISO 8062-3-2007 | Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings | ||||
| EN ISO 8069-2007 | Dried milk - Determination of content of lactic acid and lactates | ||||
| EN ISO 8092-2-2005 | Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements | ||||
| EN ISO 8092-4-1999 | Road Vehicles - Connections for On-Board Electrical Wiring Harnesses - Part 4: Pines for Single- and Multi-Pole Connections - Dimensions and Specific Requirements | ||||
| EN ISO 8106-2004 | Glass containers - Determination of capacity by gravimetric method - Test method (ISO 8106:2004) | 2004-11-01 | |||
| EN ISO 8166-2003 | Resistance welding - Procedure for the evaluation of the life of spot welding electrodes using constant machine settings (ISO 8166:2003) | 2003-06-01 | |||
| EN ISO 8178-5-1997 | Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Test Fuels | 1997-08-01 | |||
| EN ISO 8199-2007 | Water quality - General guidance on the enumeration of micro-organisms by culture (ISO 8199:2005) | 2007-10-17 | |||
| EN ISO 9455-12-1994 | Soft Soldering Fluxes - Test Methods - Part 12: Steel Tube Corrosion Test | 1994-09-01 | |||
| EN ISO 9455-15-1999 | Soft soldering fluxes - Test methods - Part 15: Copper corrosion test (ISO 9455-15:1996) | 1999-04-21 | |||
| EN ISO 9455-17-2006 | Soft soldering fluxes - Test methods - Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues ISO 9455-17: 2002 | ||||
| EN ISO 9509-2006 | Water quality - Toxicity test for assessing the inhibition of nitrification of activated sludge microorganisms ISO 9509: 2006 | ||||
| EN ISO 9514-2005 | Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing ISO 9514: 2005 | ||||
| EN ISO 9556-2001 | Steel and Iron - Determination of Total Carbon Content - Infrared Absorption Method After Combustion in an Induction Furnace ISO 9556:1989 | ||||
| EN ISO 9606-2-2004 | Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys ISO 9606-2:2004; Supersedes EN 287-2:1992 | ||||
| EN ISO 9653-2000 | Adhesives - Test Method for Shear Impact Strength of Adhesives Bonds ISO 9653: 1998; Supersedes EN 29653: 1994 | ||||
| EN ISO 9687-1995 | Dental Equipment - Graphical Symbols (ISO 9687 : 1993) | ||||
| EN ISO 9692-2-1998 | Welding and Allied Processes - Joint Preparation - Part 2: Submerged Arc Welding of Steels ISO 9692-2: 1998; Supersedes EN 29692-2: 1994 | ||||
| EN ISO 11064-2-2000 | Ergonomic Design of Control Centres - Part 2: Principles for the Arrangement of Control Suites ISO 11064-2:2000 | ||||
| EN ISO 11064-4-2004 | Ergonomic design of control centres - Part 4: Layout and dimensions of workstations ISO 11064-4:2004 | ||||
| EN ISO 11073-10201-2005 | Health informatics - Point-of-care medical device communication - Part 10201: Domain information model ISO/IEEE 11073-10201:2004 | ||||
| EN ISO 11073-30200-2005 | Health informatics - Point-of-care medical device communication - Part 30200: Transport profile - Cable connected ISO/IEEE 11073-30200:2004 |
若您对上表中数据有任何疑问，请与网站联系。
