检索关键词：

标准分类：

发布时间：

（清空日期可显示全部记录）

标准编号 标准名称 发布日期 实施日期 废止日期 替换信息
EN 4304-2005 Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness)
EN 4307-2005 Aerospace series - Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness)
EN 4312-2006 Aerospace series - Studs, coarse tolerance reduced shank, medium length thread, in heat and corrosion resisting steel, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 癈
EN 4314-2007 Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Non heat treated, forging stock a or D less than and equal with 250 mm
EN 4317-2007 Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Non heat treated, forging stock a or D less than and equal with 200 mm
EN 4321-2004 Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature) / 650 degrees C
EN 4323-2004 Aerospace series - Screws, 100 degrees countersunk head, six lobe recess, threaded to head, in titanium alloy TI-P64001, anodized, MoS2 coated - Classification: 900 MPa (at ambient temperature) / 350 degrees C
EN 4327-2001 Aerospace Series - Heat Resisting Alloy CO-WH1401 (CoCr26Ni11W8) - Filler Metal for Welding - Wire and Rod
EN 4329-2001 Aerospace Series - Heat Resisting Alloy NI-WH0001 (NiCr20) - Filler Metal for Welding - Wire and Rod
EN 4333-2002 Aerospace Series - Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2) - Filler Metal for Welding - Wire and Rod
EN 4337-2001 Aerospace Series - Heat Resisting Alloy NI-WH8901 (NiCr16Ti3Mn2) - Filler Metal for Welding - Wire and Rod [Replaced: ASD-STAN PREN 4337]
EN 4339-2001 Aerospace series - Heat resisting alloy CO-WH4001 (CoCr29W9) - Filler metal for welding - Wire and rod
EN 4343-2002 Aerospace Series - Steel FE-WM1001 (X13Cr12) - Filler Metal for Welding - Wire and Rod
EN 4352-2004 Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification: 1 550 MPa (at ambient temperature) / 425 degrees C
EN 4383-2006 Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock
EN 4402-2006 Aerospace series - Lockbolts, 100?countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 癈
EN 4408-001-2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 1: General rules
EN 4408-003-2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 3: Parts including core materials
EN 4408-005-2005 Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 5: Seams
EN 4415-2006 Aerospace series - Non-metallic materials - Textiles - Narrow woven fabrics - Technical specification
EN 4424-2006 Aerospace series - Rod-ends, adjustable, single fork and threaded shank with engagement: 1,5 ?thread diameter in titanium alloys - Dimensions and loads
EN 4429-2006 Aerospace series - Textiles - Testing of narrow woven fabrics - Determination of warp bow
EN 4449-2005 Aerospace series - Aluminium alloy AL-P7050 - T76 - Sheet - 0,8 mm less than or equal to a less than or equal to 6 mm
EN 14594-2005 Respiratory protective devices - Continuous flow compressed air line breathing apparatus - Requirements, testing, marking Supersedes EN 12419:1999, EN 139:1994, EN 1835:1999, EN 270:1994 and EN 271:1995 [Superseded: CEN EN 270]
EN 14596-2005 Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve
EN 14598-1-2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 1: Designation
EN 14598-3-2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
EN 14601-2005 Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe
EN 14603-2004 Information technology - Alphanumeric glyph image set for optical character recognition OCR-B - Shapes and dimensions of the printed image
EN 14605-2005 Protective clothing against liquid chemicals - performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) Incorporates Ame
EN 14607-1-2004 Space engineering - Mechanical - Part 1: Thermal control
EN 14620-5-2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 癈 and p165 癈 Part 5: Testing, drying, purging and cool-down
EN 14692-2005 Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the resistance to compaction of an asphalt layer
EN 14694-2005 Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of resistance to dynamic water pressure after damage by pre-treatment
EN 14700-2005 Welding consumables - Welding consumables for hard-facing
EN 14702-1-2006 Characterization of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
EN 14726-2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
EN 14730-1-2006 Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes Incorporates Amendment A1: 2010
EN 14731-2005 Execution of special geotechnical works - Ground treatment by deep vibration
EN 14736-2004 Space product assurance Quality assurance for test centres
EN 14737-2-2004 Space engineering - Ground systems and operations - Part 2: Documents requirements definitions (DRDs)
EN 14741-2006 Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
EN 14744-2005 Inland navigation vessels and sea-going vessels - Navigation light Incorporating corrigendum December 2006
EN 14750-1-2006 Railway applications - Air conditioning for urban and suburban rolling stock - Part 1: Comfort parameters
EN 14752-2005 Railway applications - Bodyside entrance systems
EN 14756-2006 Determination of the limiting oxygen concentration (LOC) for gases and vapours
EN 14764-2005 City and trekking bicycles - Safety requirements and test methods
EN 14766-2005 Mountain-bicycles - Safety requirements and test methods
EN 14776-2004 Space engineering - Ground systems and operations - Telemetry and telecommand packet utilization
EN 14781-2005 Racing bicycles - Safety requirements and test methods :1992 [: BSI BS 6102-1, BSI BS 6102-1]
776140 条记录 10180/15523 页 第一页 <上一页  10176   10177   10178   10179  10180  10181   10182   10183   10184  下一页> 最后一页

若您对上表中数据有任何疑问，请与网站联系。