（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN ISO 11469-2000 | Plastics - Generic Identification and Marking of Plastics Products ISO 11469:2000 | ||||
| EN ISO 11499-2007 | Dentistry - Single-use cartridges for local anaesthetics | ||||
| EN ISO 11502-2005 | Plastics - Film and sheeting - Determination of blocking resistance ISO 11502:1995 | ||||
| EN ISO 11541-2002 | Natural gas - Determination of water content at high pressure | ||||
| EN ISO 11542-2-1998 | Plastics - Ultra-High-Molecular-Weight Polyethylene (PE-UHMW) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 11542-2:1998 | ||||
| EN ISO 11551-2003 | Optics and Optical Instruments - Lasers and Laser-Related Equipment - Test Method for Absorptance of Optical Laser Components ISO 11551: 2003 | ||||
| EN ISO 11592-2001 | Small Craft Less Than 8 m Length of Hull - Determination of Maximum Propulsion Power Rating ISO 11592:2001 | ||||
| EN ISO 11600-2003 | Building construction - Jointing products - Classification and requirements for sealants (ISO 11600:2002) ISO 11600:2002 | ||||
| EN ISO 11621-2005 | Gas cylinders - Procedures for change of gas service [Superseded: CEN EN 1795] | ||||
| EN ISO 17078-1-2004 | Petroleum and natural gas industries - Drilling and production equipment - Part 1: Side-pocket mandrels Incorporates Amendment A1: 2010 | ||||
| EN ISO 17081-2008 | Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique | ||||
| EN ISO 11668-2001 | Binders for Paints and Varnishes - Chlorinated Polymerization Resins - General Methods of Test ISO 11668:1997 | ||||
| EN ISO 11689-1996 | Acoustics - Procedure for the Comparison of Noise-Emission Data for Machinery and Equipment ISO 11 689: 1996 | ||||
| EN ISO 11721-1-2001 | Textiles - Determination of the Resistance of Cellulose-Containing Textiles to Micro-Organisms - Soil Burial Test - Part 1: Assessment of Rot-Retardant Finishing ISO 11721-1: 2001 | ||||
| EN ISO 12571-2000 | Hygrothermal Performance of Building Materials and Products - Determination of Hygroscopic Sorption Properties ISO 12571:2000 | ||||
| EN ISO 12625-3-2005 | Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density Supersedes EN 12625-3:1999; ISO 12625-3:2005 | ||||
| EN ISO 12625-6-2005 | Tissue paper and tissue products - Part 6: Determination of grammage ISO 12625-6:2005 | ||||
| EN ISO 12680-1-2007 | Methods of test for refractory products - Part 1: Determination of dynamic Young's modulus (MOE) by impulse excitation of vibration | ||||
| EN ISO 12687-1998 | Metallic Coatings - Porosity Tests - Humid Sulfur (Flowers of Sulfur) Test ISO 12687:1996 | ||||
| EN ISO 21003-2-2008 | Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes (ISO 21003-2:2008) | 2008-07-01 | |||
| EN ISO 21003-5-2008 | Multilayer piping systems for hot and cold water installations inside buildings - Part 5: Fitness for purpose of the system (ISO 21003-5:2008) | 2008-07-01 | |||
| EN ISO 22374-2005 | Dentistry - Dental handpieces - Electrical-powered scalers and scaler tips (ISO 22374:2005) | 2005-09-01 | |||
| EN ISO 9170-2-2008 | Terminal units for medical gas pipeline systems - Part 2: Terminal units for anaesthetic gas scavenging systems (ISO 9170-2:2008) | 2008-07-01 | |||
| EN ISO 24157-2008 | Ophthalmic optics and instruments - Reporting aberrations of the human eye (ISO 24157:2008) | 2008-07-01 | |||
| EN ISO 24276-2006 | Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - General requirements and definitions ISO 24276:2006 | ||||
| EN 14486-2005 | Water quality - Detection of human enteroviruses by monolayer plaque assay | ||||
| EN 14487-2-2006 | Sprayed concrete Part 2: Execution | ||||
| EN 14488-2-2006 | Testing sprayed concrete Part 2: Compressive strength of young sprayed concrete | ||||
| EN 14488-6-2006 | Testing sprayed concrete Part 6: Thickness of concrete on a substrate | ||||
| EN 14496-2005 | Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards - Definitions, requirements and test methods | ||||
| EN 14498-2004 | Products and systems for the protection and repair of concrete structures - Test methods - Volume and weight changes of injection products after air drying and water storage cycles | ||||
| EN 14521-2004 | Resilient floor coverings - Specification for smooth rubber floor coverings with or without foam backing with a decorative layer | ||||
| EN 14526-2004 | Foodstuffs - Determination of saxitoxin and dc-saxitoxin in mussels - HPLC method using pre-column derivatization with peroxide or periodate oxidation | ||||
| EN 14528-2007 | Bidets - Functional requirements and test methods | ||||
| EN 14531-1-2005 | Railway applications - Methods for calculation of stopping distances, slowing distances and immobilization braking - Part 1: General algorithms | ||||
| EN 14532-2-2004 | Welding consumables - Test methods and quality requirements - Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys | ||||
| EN 14533-2003 | Textiles and textile products Burning behaviour of bedding items Classification scheme | ||||
| EN 14540-2004 | Fire-fighting hoses - Non-percolating layflat hoses for fixed systems Incorporating Amendment A1: 04/2007 | ||||
| EN 14546-2005 | Foodstuffs - Determination of trace elements - Determination of total arsenic by hydride generation atomic absorption spectrometry (HGAAS) after dry ashing | ||||
| EN 14562-2006 | Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of fungicidal or yeasticidal activity for instruments used in the medical area - Test method and requirements (phase 2, step 2) | ||||
| EN 14565-2004 | Resilient floor coverings - Floor coverings based upon synthetic thermoplastic polymers - Specification | ||||
| EN 14569-2004 | Foodstuffs - Microbiological screening for irradiated food using LAL/GNB procedures | ||||
| EN 14571-2005 | Metallic coatings on nonmetallic basis materials - Measurement of coating thickness - Microresistivity method | ||||
| EN 14574-2004 | Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics | ||||
| EN 14576-2005 | Geosynthetics - Test method for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking | ||||
| EN 14580-2005 | Natural stone test methods Determination of static elastic modulus | ||||
| EN 14582-2007 | Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods | 2007-03-14 | |||
| EN 1051-2-2007 | Glass in building - Glass blocks and glass pavers - Part 2: Evaluation of conformity/Product standard | 2007-10-03 | |||
| EN ISO 12048-2000 | Packaging - Complete, Filled Transport Packages - Compression and Stacking Tests Using a Compression Tester ISO 12048:1994; Supersedes EN 22872:1992 and EN 22874:1992 | ||||
| EN ISO 17249-2004 | Safety footwear with resistance to chain saw cutting Incorporates Amendment A1: 2007 |
若您对上表中数据有任何疑问，请与网站联系。
