（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN 144-1-2000 | Respiratory protective devices Gas cylinder valves Part 1: Thread connections for insert connector Includes amendment A1:2003, A2:2005 | ||||
| EN 144-3-2003 | Respiratory protective devices - Gas cylinder valves - Part 3: Outlet connections for diving gases Nitrox and oxygen Incorporating corrigendum December 2003 | ||||
| EN 153-2006 | Methods of measuring the energy consumption of electric mains operated household refrigerators, frozen food storage cabinets, food freezers and their combinations, together with associated characteristics | ||||
| EN 171-2002 | Personal eye-protection Infrared filters Transmittance requirements and recommended use | ||||
| EN 179-2008 | Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods | ||||
| EN 196-1-2005 | Methods of testing cement Part 1: Determination of strength | ||||
| EN 196-3-2005 | Methods of testing cement - Part 3: Determination of setting times and soundness Incorporates Amendment A1: 2008 | ||||
| EN 196-7-2007 | Methods of testing cement - Part 7: Methods of taking and preparing samples of cement | ||||
| EN 250-2000 | Respiratory Equipment - Open-Circuit, Self-Contained, Compressed Air Diving Apparatus - Requirements Testing, Marking Includes Amendment A1:2006 | ||||
| EN 622-3-2004 | Fibreboards - Specifications - Part 3: Requirements for medium boards | ||||
| EN 623-4-2004 | Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness Supersedes ENV 623-4:1993 | ||||
| EN 625-1995 | Gas-Fired Central Heating Boilers - Specific Requirements for the Domestic Hot Water Operation of Combination Boilers of Nominal Heat Input Not Exceeding 70 kW | ||||
| EN 631-1-1993 | Materials and Articles in Contact with Foodstuffs - Catering Containers - Part 1: Dimensions of Containers | ||||
| EN 634-1-1995 | Cement-Bonded Particleboards - Specification - Part 1: General Requirements | ||||
| EN 458-2004 | Hearing Protectors - Recommendations for Selection, Use, Care and Maintenance - Guidance Document | ||||
| EN 464-1994 | Protective Clothing - Protection Against Liquid and Gaseous Chemicals, Including Liquid Aerosols and Solid Particles - Test Method: Determination of Leak-Tightness of Gas-Tight Suits (Internal Pressure Test) | ||||
| EN 469-2005 | Protective Clothing for Firefighters - Requirements and Test Methods for Protective Clothing for Firefighting Incorporating corrigendum September 2006; Amendment 1: November 2006 | ||||
| EN 485-2-2008 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties | ||||
| EN 546-1-2006 | Aluminium and Aluminium Alloys - Foil - Part 1: Technical Conditions for Inspection and Delivery | ||||
| EN 546-3-2006 | Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions | ||||
| EN 547-1-1996 | Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery Incorporates Amendment A1: 2008 | ||||
| EN 549-1994 | Rubber Materials for Seals and Diaphragms for Gas Appliances and Gas Equipment | ||||
| EN 561-2002 | Gas Welding Equipment - Quick-Action Couplings with Shut-Off Valves for Welding, Cutting and Allied Processes | ||||
| EN 564-2006 | Mountaineering Equipment - Accessory Cord - Safety Requirements and Test Methods | ||||
| EN 566-2006 | Mountaineering Equipment - Slings - Safety Requirements and Test Methods | ||||
| EN 568-2007 | Mountaineering Equipment - Ice Anchors - Safety Requirements and Test Methods | ||||
| EN 570-2007 | Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification | ||||
| EN 572-9-2004 | Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard | ||||
| EN 573-5-2007 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products | ||||
| EN 575-1995 | Aluminium and Aluminium Alloys - Master Alloys Produced by Melting - Specifications | ||||
| EN 580-2003 | Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT) | ||||
| EN 581-3-2007 | Outdoor Furniture - Seating and Tables for Camping, Domestic and Contract Use - Part 3: Mechanical Safety Requirements and Test Methods for Tables | ||||
| EN 583-1-1998 | Non-destructive testing Ultrasonic examination Part 1: General principles Includes amendment A1:2003 | ||||
| EN 589-2008 | Automotive fuels - LPG - Requirements and test methods | ||||
| EN 602-2004 | Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff | ||||
| EN 604-1-1997 | Aluminium and Aluminium Alloys - Cast Forging Stock - Part 1: Technical Conditions for Inspection and Delivery | ||||
| EN 606-2004 | Bar coding - Transport and handling labels for steel products | ||||
| EN 610-1995 | Tin and Tin Alloys - Ingot Tin | ||||
| EN 611-2-1996 | Tin and Tin Alloys - Pewter and Pewterware - Part 2: Pewterware | ||||
| EN 613-2000 | Independent gas-fired convection heaters Includes amendment A1:2003; Supersedes HD 1002:1994 | ||||
| EN 713-1993 | Plastics Piping Systems - Mechanical Joints Between Fittings and Polyolefin Pressure Pipes - Test Method for Leaktightness Under Internal Pressure of Assemblies Subjected to Bending | ||||
| EN 764-1-2004 | Pressure equipment - Part 1: Terminology - Pressure, temperature, volume, nominal size Supersedes EN 764:1994 | ||||
| EN 725-1-2007 | Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 1: Determination of Impurities in Alumina | ||||
| EN 725-3-2007 | Advanced technical ceramics - Methods of test for ceramic powders - Part 3: Determination of the oxygen content of nonoxides by thermal extraction with a carrier gas | ||||
| EN 635-3-1995 | Plywood - Classification by Surface Appearance - Part 3: Softwood | ||||
| EN 641-1994 | Reinforced Concrete Pressures Pipes, Cylinder Type, Including Joints and Fittings | ||||
| EN 643-2001 | Paper and Board - European List of Standard Grades of Recovered Paper and Board | ||||
| EN 647-1993 | Paper and Board Intended to Come into Contact with Foodstuffs - Preparation of a Hot Water Extract | ||||
| EN 657-2005 | Thermal spraying - Terminology, classification | ||||
| EN 926-2-2005 | Paragliding equipment - Paragliders - Part 2: Requirements and test methods for classifying flight safety characteristics Supersedes ENV 926-2:1999 |
若您对上表中数据有任何疑问，请与网站联系。
