（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN 14019-2004 | Curtain Walling - Impact resistance - Performance requirements | ||||
| EN 14435-2004 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only - Requirements, testing, marking | ||||
| EN 14437-2004 | Determination of the uplift resistance of installed clay or concrete tiles for roofing - Roof system test method | ||||
| EN 14439-2006 | Cranes - Safety - Tower cranes Incorporates Amendment A2: 2009 | ||||
| EN 14447-2005 | Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification | ||||
| EN 14450-2005 | Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure safe cabinets | ||||
| EN 14452-2005 | Devices to prevent pollution by backflow of potable water - Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 - Family D, type B | ||||
| EN 14454-2005 | Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H, type A | ||||
| EN 14456-2004 | Products used for treatment of water intended for human consumption Bone charcoal | ||||
| EN 14458-2004 | Personal eye-equipment - Faceshields and visors for use with firefighters?and high performance industrial safety helmets used by firefighters, ambulance and emergency services Incorporating Corrigendum September 2004 | ||||
| EN 14462-2005 | Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3 Incorporates Amendment A1: 2009 | ||||
| EN 14467-2004 | Recreational diving services - Requirements for recreational scuba diving service providers | ||||
| EN 14468-2-2005 | Table tennis Part 2: Posts for net assemblies Requirements and test methods | ||||
| EN 14959-2006 | Touch and close fasteners - Determination of resistance to fraying after washing | ||||
| EN 14469-2-2004 | Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens | ||||
| EN 14469-4-2004 | Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 4: Determination of bleeding of colouring materials | ||||
| EN 14470-2-2006 | Fire safety storage cabinets - Part 2: Safety cabinets for pressurised gas cylinders | 2006-08-30 | |||
| EN 14474-2004 | Precast concrete products - Concrete with wood-chips as aggregate - Requirements and test methods | 2004-12-15 | |||
| EN 14476-2005 | Chemical disinfectants and antiseptics - Virucidal quantitative suspension test for chemical disinfectants and antiseptics used in human medicine - Test method and requirements (phase 2, step 1) Incorporating Amendment 1: 2006 | ||||
| EN 14478-2005 | Railway applications - Braking - Generic vocabulary | ||||
| EN 14480-2004 | Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method Incorporating Corrigendum May 2006 | ||||
| EN 14994-2007 | Gas explosion venting protective systems | ||||
| EN 14996-2006 | Water quality - Guidance on assuring the quality of biological and ecological assessments in the aquatic environment | ||||
| EN 15000-2008 | Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters | ||||
| EN 15001-2-2008 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissionin | ||||
| EN 15002-2006 | Characterization of waste - Preparation of test portions from the laboratory sample | ||||
| EN 15004-1-2008 | Fixed firefighting systems - Gas extinguishing systems - Part 1: Design, installation and maintenance | ||||
| EN 15004-2-2008 | Fixed firefighting systems - Gas extinguishing systems - Part 2: Physical properties and system design of gas extinguishing systems for FK-5-1-12 extinguishant | ||||
| EN 15004-3-2008 | Fixed firefighting systems - Gas extinguishing systems - Part 3: Physical properties and system design of gas extinguishing systems for HCFC Blend A extinguishant | ||||
| EN 15004-4-2008 | Fixed firefighting systems - Gas extinguishing systems - Part 4: Physical properties and system design of gas extinguishing systems for HFC 125 extinguishant | ||||
| EN 15004-5-2008 | Fixed firefighting systems - Gas extinguishing systems - Part 5: Physical properties and system design of gas extinguishing systems for HFC 227ea extinguishant | ||||
| EN 15004-6-2008 | Fixed firefighting systems - Gas extinguishing systems - Part 6: Physical properties and system design of gas extinguishing systems for HFC 23 extinguishant | ||||
| EN 15004-7-2008 | Fixed firefighting systems - Gas extinguishing systems - Part 7: Physical properties and system design of gas extinguishing systems for IG-01 extinguishant | ||||
| EN 15004-8-2008 | Fixed firefighting system - Gas extinguishing systems - Part 8: Physical properties and system design of gas extinguishing systems for IG-100 extinguishant | ||||
| EN 15004-9-2008 | Fixed firefighting systems - Gas extinguishing systems - Part 9: Physical properties and system design of gas extinguishing systems for IG-55 extinguishant | ||||
| EN 15004-10-2008 | Fixed firefighting systems - Gas extinguishing systems - Part 10: Physical properties and system design of gas extinguishing systems for IG-541 extinguishant | ||||
| EN 15006-2006 | Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture | ||||
| EN 15008-2006 | Aerosol containers - Aluminium containers - Dimensions of onepiece cans with 25,4 mm aperture | ||||
| EN 15010-2006 | Aerosol containers - Aluminium containers - Tolerances of the fundamental dimensions in connection with the clinch | ||||
| EN 13658-2-2005 | Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering | 2005-05-18 | |||
| EN 13672-2004 | Surfaces for sports areas - Determination of resistance to abrasion of non-filled synthetic turf | 2004-08-11 | |||
| EN 14505-2005 | Cathodic protection of complex structures | ||||
| EN 14509-2006 | Self-supporting double skin metal faced insulating panels - Factory made products - Specifications | 2006-11-15 | 2013-10-16 | ||
| EN 14512-2006 | Tanks For The Transport Of Dangerous Goods - Tank Equipment For The Transport Of Liquid Chemicals - Hinged Manhole Covers And Neckrings With Pivoting Bolts | 2006-07-01 | |||
| EN 14514-2004 | Space engineering standards - Functional analysis | 2004-08-18 | |||
| EN 15014-2007 | Plastics piping systems - Buried and above ground systems for water and other fluids under pressure - Performance characteristics for pipes, fittings and their joints | ||||
| EN 15017-2005 | Funeral services Requirements | ||||
| EN 15022-3-2006 | Copper and copper alloys - Determination of tin content - Part 3: Low tin content - Flame atomic absorption spectrometry method (FAAS) | ||||
| EN 15026-2007 | Hygrothermal performance of building components and building elements ?Assessment of moisture transfer by numerical simulation | ||||
| EN 15032-2006 | Chemicals used for treatment of swimming pool water - Trichloroisocyanuric acid Incorporates Amendment A1: 2008 |
若您对上表中数据有任何疑问，请与网站联系。
