（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN 927-2-2006 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2: Performance specification [Superseded: CEN ENV 927-2] | ||||
| EN 13482-2001 | Rubber Hoses and Hose Assemblies for Asphalt and Bitumen - Specification | ||||
| EN 13490-2001 | Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration Incorporates Amendment A1: 2008 | ||||
| EN 13492-2004 | Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment Incorporates A1: August 2006 | ||||
| EN 13493-2005 | Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites | ||||
| EN ISO 2554-1998 | Plastics - Unsaturated Polyester Resins - Determination of Hydroxyl Value | ||||
| EN ISO 2566-1-1999 | Steel - Conversion of Elongation Values - Part 1: Carbon and Low Alloy Steels | ||||
| EN ISO 2578-1998 | Plastics - Determination of Time-Temperature Limits After Prolonged Exposure to Heat | ||||
| EN ISO 5771-2008 | Rubber hoses and hose assemblies for transferring anhydrous ammonia - Specification | ||||
| EN 15445-2008 | Fugitive and diffuse emissions of common concern to industry sectors - Qualification of fugitive dust sources by Reverse Dispersion Modelling | ||||
| EN 15446-2008 | Fugitive and diffuse emissions of common concern to industry sectors - Measurement of fugitive emission of vapours generating from equipment and piping leaks | ||||
| EN 15450-2007 | Heating systems in buildings - Design of heat pump heating systems | ||||
| EN 15452-2008 | Fertilizers - Determination of chelating agents - Determination of iron chelated by o,p-EDDHA by reversed phase HPLC [Superseded: CEN CEN/TS 15452] | ||||
| EN 15457-2007 | Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi | ||||
| EN 15458-2007 | Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae | ||||
| EN 15459-2007 | Energy performance of buildings - Economic evaluation procedure for energy systems in buildings | ||||
| EN 15469-2007 | Petroleum products - Test method for free water in liquefied petroleum gas by visual inspection | ||||
| EN 15471-2007 | Liquefied petroleum gases - Determination of dissolved residues - High-temperature gravimetric method | ||||
| EN 15483-2008 | Ambient air quality - Atmospheric measurements near ground with FTIR spectroscopy | ||||
| EN ISO 10472-5-2008 | Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers, feeders and folders | ||||
| EN ISO 10472-6-2008 | Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses | ||||
| EN ISO 11997-1-2006 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humidity | ||||
| EN ISO 12004-1-2008 | Metallic materials - Sheet and strip - Determination of forminglimit curves - Part 1: Measurement and application of forminglimit diagrams in the press shop | ||||
| EN ISO 12004-2-2008 | Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory | ||||
| EN ISO 14663-1-2006 | Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 1: Designation system and basis for specifications | ||||
| EN ISO 14678-2005 | Adhesives - Determination of resistance to flow (sagging) | ||||
| EN ISO 14683-2007 | Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values | ||||
| EN 12393-2-2008 | Foods of plant origin - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 2: Methods for extraction and cleanup | ||||
| EN 12393-3-2008 | Foods of plant origin - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 3: Determination and confirmatory tests | ||||
| EN 13648-3-2002 | Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge - Capacity and sizing | ||||
| EN 13900-1-2003 | Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 1: General introduction | ||||
| EN 717-2-1994 | Wood-based panels Determination of formaldehyde release Part 2: Formaldehyde release by the gas analysis method Incorporating Corrigendum July 2002 | ||||
| EN 722-1-2004 | Leisure accommodation vehicles - Liquid fuel heating systems - Part 1: Caravans and caravan holiday homes | ||||
| EN 927-5-2006 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 5: Assessment of the liquid water permeability | ||||
| EN 927-6-2006 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water | ||||
| EN 772-5-2001 | Methods of Test for Masonry Units - Part 5: Determination of the Active Soluble Salts Content of Clay Masonry Units Ratified European Text:11/10/2001 | ||||
| EN 797-1995 | Bar Coding - Symbology Specifications - `EAN/UPC碔ncorporates Corrigendum October 1996 | ||||
| EN 806-1-2000 | Specifications for Installations Inside Buildings Conveying Water for Human Consumption - Part 1: General Includes Amendment A1:2001 | ||||
| EN 806-3-2006 | Specifications for installations inside buildings conveying water for human consumption - Part 3: Pipe sizing - Simplified method | ||||
| EN 813-2008 | Personal fall protection equipment - Sit harnesses | ||||
| EN 816-1996 | Sanitary Tapware - Automatic Shut-Off Valves PN 10 | ||||
| EN 817-2008 | Sanitary tapware - Mechanical mixing valves (PN 10) - General technical specifications | ||||
| EN 818-3-1999 | Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4 Incorporates Amendment A1: April 2008 | ||||
| EN 818-7-2002 | Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) Incorporates Amendment A1: 2008 | ||||
| EN 820-2-2003 | Advanced technical ceramics - Methods of testing monolithic ceramics - Thermo-mechanical properties - Part 2: Determination of self-loaded deformation Supersedes ENV 820-2:1992 | ||||
| EN 821-3-2005 | Advanced technical ceramics - Monolithic ceramics. Thermophysical properties - Part 3: Determination of specific heat capacity Supersedes ENV 821-3:1993 | ||||
| EN 827-2005 | Adhesives - Determination of Conventional Solids Content and Constant Mass Solids Content | ||||
| EN 836-1997 | Garden Equipment - Powered Lawnmowers - Safety Includes Amendments A1:1997, A2:2001 and A3:2004 | ||||
| EN 837-2-1997 | Pressure Gauges - Part 2: Selection and Installation Recommendations for Pressure Gauges | ||||
| EN 844-8-1997 | Round and Sawn Timber - Terminology - Part 8: Terms Relating to Features of Round Timber |
若您对上表中数据有任何疑问，请与网站联系。
