（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN ISO 12625-5-2005 | Tissue paper and tissue products - Part 5: Determination of wet tensile strength | ||||
| EN ISO 12718-2008 | Non-destructive testing - Eddy current testing - Vocabulary [Superseded: CEN EN 1330-5] | ||||
| EN ISO 9046-2004 | Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature [Superseded: CEN EN 29046] | ||||
| EN ISO 9073-9-2008 | Textiles - Test methods for nonwovens - Part 9: Determination of drapability including drape coefficient | ||||
| EN ISO 10821-2005 | Industrial sewing machines - Safety requirements for sewing machines, units and systems Incorporates Amendment A1: 2009 | ||||
| EN ISO 10846-2-2008 | Acoustics and vibration - Laboratory measurement of vibroacoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion | ||||
| EN ISO 10848-1-2006 | Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 1: Frame document | ||||
| EN 15088-2005 | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery | 2005-12-21 | |||
| EN ISO 15088-2008 | Water quality - Determination of the acute toxicity of waste water to zebrafish eggs (Danio rerio) (ISO 15088:2007) | 2008-11-19 | |||
| EN ISO 10993-7-2008 | Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals (ISO 10993-7:2008) | 2008-10-15 | |||
| EN ISO 15403-1-2008 | Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality (ISO 15403-1:2006) | 2008-01-09 | |||
| EN ISO 15415-2005 | Information technology ?Automatic identification and data capture techniques ?Bar code print quality test specification ?Two-dimensional symbols | ||||
| EN ISO 9241-300-2008 | Ergonomics of human-system interaction - Part 300: Introduction to electronic visual display requirements (ISO 9241-300:2008) | 2008-11-15 | |||
| EN ISO 13477-2008 | Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test) (ISO 13477:2008) | 2008-03-15 | |||
| EN ISO 15181-4-2008 | Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 4: Determination of pyridinetriphenylborane (PTPB) concentration in the extract and calculation of the release rate | ||||
| EN ISO 9342-2-2005 | Optics and optical instruments - Test lenses for calibration of focimeters - Part 2: Test lenses for focimeters used for measuring contact lenses [Superseded: CEN EN ISO 9342] | ||||
| EN ISO 9346-2007 | Hygrothermal performance of buildings and building materials - Physical quantities for mass transfer - Vocabulary | ||||
| EN ISO 15252-1-1999 | Plastics - Epoxy Powder Moulding Compounds (EP-PMCs) - Part 1: Designation System and Basis for Specifications ISO 15252-1: 1999 | ||||
| EN ISO 15548-1-2008 | Non-destructive testing - Equipment for eddy current examination - Part 1: Instrument characteristics and verification [Superseded: CEN EN 13860-1] | ||||
| EN ISO 15548-2-2008 | Non-destructive testing - Equipment for eddy current examination - Part 2: Probe characteristics and verification [Superseded: CEN EN 13860-2] | ||||
| EN ISO 15548-3-2008 | Non-destructive testing - Equipment for eddy current examination - Part 3: System characteristics and verification [Superseded: CEN EN 13860-3] | ||||
| EN ISO 11143-2008 | Dentistry - Amalgam separators | ||||
| EN ISO 11145-2008 | Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols | ||||
| EN ISO 13753-2008 | Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system | ||||
| EN ISO 13789-2007 | Thermal performance of buildings - Transmission and ventilation heat transfer coefficients - Calculation method | ||||
| EN ISO 13790-2008 | Energy performance of buildings - Calculation of energy use for space heating and cooling [Superseded: CEN EN 832] | ||||
| EN ISO 13850-2008 | Safety of machinery - Emergency stop - Principles for design | ||||
| EN ISO 11348-1-2008 | Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 1: Method using freshly prepared bacteria | ||||
| EN ISO 11348-2-2008 | Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 2: Method using liquid-dried bacteria | ||||
| EN ISO 11348-3-2008 | Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 3: Method using freeze-dried bacteria | ||||
| EN ISO 10081-1-2005 | Classification of dense shaped refractory products - Part 1: Alumina-silica [Superseded: CEN EN 12475-1] | ||||
| EN ISO 14113-2008 | Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) | ||||
| EN ISO 14116-2008 | Protective clothing - Protection against heat and flame - Limited flame spread materials, material assemblies and clothing [Superseded: CEN EN 533] | ||||
| EN ISO 10270-2008 | Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors | ||||
| EN ISO 11553-1-2008 | Safety of machinery - Laser processing machines - Part 1: General safety requirements | ||||
| EN ISO 11553-2-2008 | Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007) | 2008-11-26 | |||
| EN ISO 10318-2005 | Geosynthetics - Terms and definitions (ISO 10318:2005) | 2005-07-01 | 2015-04-08 | ||
| EN ISO 14310-2008 | Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2008) | 2008-11-01 | |||
| EN ISO 14509-1-2008 | Small craft - Airborne sound emitted by powered recreational craft - Part 1: Pass-by measurement procedures (ISO 14509-1:2008) | 2008-10-01 | |||
| EN ISO 10350-1-2008 | Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2007) | 2008-08-27 | |||
| EN ISO 10414-1-2008 | Petroleum and natural gas industries - Field testing of drilling fluids - Part 1: Water-based fluids (ISO 10414-1:2008) | 2008-11-19 | |||
| EN ISO 14532-2005 | Natural gas - Vocabulary (ISO 14532:2001 including Corrigendum 1:2002) | 2005-05-11 | |||
| EN ISO 8534-2008 | Animal and vegetable fats and oils - Determination of water content - Karl Fischer method (pyridine free) (ISO 8534:2008) | 2008-07-01 | |||
| EN ISO 8537-2008 | Sterile single-use syringes, with or without needle, for insulin (ISO 8537:2007) | 2008-07-02 | |||
| EN ISO 10456-2007 | Building materials and products - Hygrothermal properties -Tabulated design values and procedures for determining declared and design thermal values (ISO 10456:2007) | 2007-12-15 | |||
| EN ISO 11890-1-2007 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) | 2007-07-01 | |||
| EN ISO 14593-2005 | Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Method by analysis of inorganic carbon in sealed vessels (CO2 headspace test) | ||||
| EN ISO 8655-7-2005 | Piston-operated volumetric apparatus - Part 7: Non-gravimetric methods for the assessment of equipment performance | ||||
| EN ISO 17201-4-2006 | Acoustics - Noise from shooting ranges - Part 4: Prediction of projectile sound | ||||
| EN ISO 17353-2005 | Water quality - Determination of selected organotin compounds - Gas chromatographic method |
若您对上表中数据有任何疑问，请与网站联系。
