（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN 15094-2008 | Safety of Machinery - Safety requirements for cold flat rolling mills | ||||
| EN 15096-2008 | Devices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D - General technical specification | ||||
| EN 13744-2004 | Surfaces for sports areas - Procedure for accelerated ageing by immersion in hot water | ||||
| EN 13748-1-2004 | Terrazzo tiles - Part 1: Terrazzo tiles for internal use | ||||
| EN 13757-6-2008 | Communication systems for meters and remote reading of meters - Part 6: Local Bus | ||||
| EN 13758-1-2006 | Textiles - Solar UV Protective Properties - Part 1: Method of Test for Apparel Fabrics Incorporates Amendment A1 | ||||
| EN 13463-3-2005 | Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure 磀 | ||||
| EN 13463-6-2005 | Non-electrical equipment for use in potentially explosive atmospheres - Part 6: Protection by control of ignition source 碽 | ||||
| EN 13466-2-2001 | Fertilizers - Determination of Water Content (Karl Fischer Methods) - Part 2: 2-Propanol as Extracting Medium | ||||
| EN 13470-2001 | Thermal Insulating Products for Building Equipment and Industrial Installations - Determination of the Apparent Density of Preformed Pipe Insulation | ||||
| EN 13475-2001 | Liming Materials - Determination of Calcium Content - Oxalate Method | ||||
| EN 13476-2-2007 | Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smoot | ||||
| EN 13477-1-2001 | Non-Destructive Testing - Acoustic Emission - Equipment Characterization - Part 1: Equipment Description | ||||
| EN 13827-2003 | Steel cord conveyor belts Determination of the lateral and vertical displacement of steel cords | ||||
| EN 13829-2000 | Thermal Performance of Buildings - Determination of Air Permeability of Buildings - Fan Pressurization Method ISO 9972:1996, Modified | ||||
| EN 13831-2007 | Closed expansion vessels with built in diaphragm for installation in water | ||||
| EN 13832-2-2006 | Footwear protecting against chemicals - Part 2: Requirements for footwear resistant to chemicals under laboratory conditions | ||||
| EN 13834-2007 | Cookware - Ovenware for use in traditional domestic ovens Incorporates Amendment A1: 2009 | ||||
| EN 13836-2006 | Gas fired central heating boilers - Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1 000 kW | ||||
| EN 13848-1-2003 | Railway applications - Track - Track geometry quality - Part 1: Characterisation of track geometry Incorporates Amendment A1: 2008 | 2003-12-01 | |||
| EN 14223-2005 | Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of water absorption | 2005-12-07 | |||
| EN 14702-2-2006 | Characterization of sludges - Settling properties - Part 2: Determination of thickenability | 2006-03-29 | |||
| EN 14704-1-2005 | Determination of the elasticity of fabrics - Part 1: Strip tests | 2005-04-13 | |||
| EN 14705-2005 | Heat exchangers Method of measurement and evaluation of thermal performances of wet cooling towers | 2005-06-29 | |||
| EN 14710-1-2005 | Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements Incorporates Amendment A2: 2008 | 2005-02-01 | |||
| EN 14712-2005 | Surface active agents - Determination of physical stability in alkaline and acid solutions | 2005-05-18 | |||
| EN 14714-2005 | Inland navigation vessels - Connection nozzle for equipment and devices at cargo tanks - Dimensions | 2005-04-06 | |||
| EN 14716-2004 | Stretched ceilings - Requirements and test methods | 2004-12-08 | |||
| EN 14718:2014 | Influence of organic materials on water intended for human consumption - Determination of the chlorine demand - Test method | 2014-12-03 | |||
| EN 14727-2005 | Laboratory furniture - Storage units for laboratories - Requirements and test methods | 2005-12-14 | |||
| EN ISO 14889-2009 | Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses | 2009-03-25 | |||
| EN ISO 8254-1-2009 | Paper and board - Measurement of specular gloss - Part 1: 75 degree gloss with a converging beam, TAPPI method | 2009-02-15 | |||
| EN ISO 11064-5-2008 | Ergonomic design of control centres - Part 5: Displays and controls | 2008-07-01 | |||
| EN ISO 11102-2-2009 | Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement | 2009-02-25 | |||
| EN ISO 10079-1-2009 | Medical suction equipment - Part 1: Electrically powered suction equipment - Safety requirements | 2009-03-04 | |||
| EN ISO 10079-2-2009 | Medical suction equipment - Part 2: Manually powered suction equipment | 2009-03-04 | |||
| EN ISO 10079-3-2009 | Medical suction equipment - Part 3: Suction equipment powered from a vacuum or pressure source | 2009-03-04 | |||
| EN ISO 11117-2008 | Gas cylinders - Valve protection caps and valve guards - Design, construction and tests [Superseded: CEN EN 962] | 2008-09-01 | |||
| EN ISO 10472-4-2008 | Safety requirements for industrial laundry machinery - Part 4: Air dryers | 2008-10-29 | |||
| EN ISO 8799-2009 | Surface active agents - Sulfated ethoxylated alcohols and alkylphenols - Determination of content of unsulfated matter | 2009-03-15 | |||
| EN ISO 21531-2009 | Dentistry - Graphical symbols for dental instruments | 2009-02-15 | |||
| EN ISO 25619-2:2015 | Geosynthetics - Determination of compression behaviour - Part 2: Determination of short-term compression behaviour | 2015-09-09 | |||
| EN 1465-2009 | Adhesives - Determination of tensile lap-shear strength of bonded assemblies | 2009-02-11 | |||
| EN 933-4-2008 | Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index | 2008-03-01 | |||
| EN 975-1-2009 | Sawn timber - Appearance grading of hardwoods - Part 1: Oak and beech | 2009-03-01 | |||
| EN ISO 15750-3-2008 | Packaging - Steel drums - Part 3: Inserted flange-type closure systems | 2008-06-01 | |||
| EN ISO 20565-1-2008 | Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica | 2008-06-01 | |||
| EN ISO 20565-2-2008 | Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis | 2008-12-01 | |||
| EN ISO 20565-3-2008 | Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP | 2008-12-01 | |||
| EN 1011-1-2009 | Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding | 2009-03-04 |
若您对上表中数据有任何疑问，请与网站联系。
