（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| CEN/TR 15367-3-2009 | Petroleum products - Guide for good housekeeping - Part 3: Prevention of cross contamination | 2009-01-21 | |||
| CEN/TR 15738:2008 | Petroleum products - Heating fuels - Need, feasibility and required deliverables for a common European specification | 2008-09-10 | |||
| CEN/TS 15717-2008 | Parquet flooring - General guideline for installation | 2008-04-16 | |||
| CEN/TS 15398-2008 | Resilient, textile and laminate floor coverings - Floor covering standard symbols | 2008-07-23 | |||
| EN 115-1-2008 | Safety of escalators and moving walks - Part 1: Construction and installation Incorporates Amendment A1: 2010 | 2008-07-01 | |||
| EN 1501-3-2008 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles | 2008-03-19 | |||
| EN 1626-2008 | Cryogenic vessels - Valves for cryogenic service | 2008-11-05 | |||
| EN 1914-2009 | Inland navigation vessels - Work boats, ship's boats and lifeboats | 2009-01-21 | |||
| EN 2002-005-2007 | Aerospace series - Test methods for metallic materials - Part 005: Uninterrupted creep and stress-rupture testing | 2007-11-14 | |||
| EN 3631-2008 | Aerospace series - Fluid fittings, flanged, 90 Degree elbowed - Sealing by O-ring for 0,8 mm thick tubes | 2008-08-06 | |||
| EN 3660-023-2008 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 023: Cable outlet, style A, 90 , composite, unsealed, with cable tie strain relief - Product standard | 2008-04-16 | |||
| EN 3672-2008 | Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, for 30 Degrees swage - Classification: 1 210 MPa (at ambient temperature)/730 Degrees C | 2008-08-06 | |||
| EN 12245-2009 | Transportable gas cylinders - Fully wrapped composite cylinders Incorporating corrigendum June 2010 | 2009-01-01 | |||
| EN 13120-2009 | Internal blinds - Performance requirements including safety | ||||
| EN 13598-2-2009 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers in traffic areas and deep unde | 2009-01-14 | |||
| EN 15194:2009 | Cycles - Electrically power assisted cycles - EPAC Bicycles | 2009-11-01 | |||
| EN 15199-3-2008 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3: Crude oil | 2008-05-21 | |||
| EN 15227-2008 | Railway applications - Crashworthiness requirements for railway vehicle bodies | 2008-01-01 | |||
| EN 14286-2008 | Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods | 2008-09-01 | |||
| EN ISO 6145-1-2008 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration | 2008-08-01 | |||
| EN ISO 6145-4-2008 | Gas Analysis - Preparation Of Calibration Gas Mixtures Using Dynamic Volumetric Methods - Part 4: Continuous Syringe Injection Method | 2008-08-01 | |||
| EN ISO 6145-6-2008 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices | 2008-08-20 | |||
| EN ISO 6145-8-2008 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method | 2008-08-20 | |||
| EN ISO 6145-10-2008 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method | 2008-08-20 | |||
| EN 15558-2009 | Fertilizers - Determination of nitric and ammoniacal nitrogen according to Ulsch | 2009-01-21 | |||
| EN 15573-2008 | Earth-moving machinery - Design requirements for circulation on the road | 2008-05-07 | |||
| EN 15585-2008 | Cereals and cereal products - Durum wheat (T. durum Desf.) - Determination of percentage of mitadine grains and calculation of percentage of vitreous grains | 2008-07-30 | |||
| EN 15632-1-2009 | District heating pipes - Pre-insulated flexible pipe systems - Part 1: Classification, general requirements and test methods | 2009-01-01 | |||
| EN 15632-4-2009 | District heating pipes - Pre-insulated flexible pipe systems - Part 4: Bonded system with metal service pipes; requirements and test methods | ||||
| EN 15633-1-2009 | Foodstuffs - Detection of food allergens by immunological methods - Part 1: General considerations | ||||
| EN 15634-1-2009 | Foodstuffs - Detection of food allergens by molecular biological methods - Part 1: General considerations | ||||
| EN 15647-2009 | Surface active agents - Determination of the dispersing effect of surfactants on powder | ||||
| EN 15655-2009 | Ductile iron pipes, fittings and accessories - Internal polyurethane lining for pipes and fittings - Requirements and test methods | ||||
| EN 15800-2008 | Cylindrical helical springs made of round wire - Quality specifications for cold coiled compression springs | ||||
| EN ISO 6682-2008 | Earth-moving machinery - Zones of comfort and reach for controls | ||||
| EN ISO 148-3-2008 | Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines [Superseded: CEN EN 10045-2] | 2008-12-15 | |||
| EN ISO 3452-5-2008 | Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C | 2008-12-01 | |||
| EN ISO 3452-6-2008 | Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 degrees C | 2008-12-01 | |||
| EN ISO 3861-2008 | Rubber hoses for sand and grit blasting - Specification | 2008-11-26 | |||
| EN ISO 1179-1-2008 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports | 2008-04-23 | |||
| EN ISO 1179-2-2008 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) | 2008-04-23 | |||
| EN ISO 1179-3-2008 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) | 2008-04-23 | |||
| EN ISO 1179-4:2008 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-tometal sealing (type B) | 2008-04-23 | |||
| EN 15427-2008 | Railway applications - Wheel/rail friction management - Flange lubrication | 2008-10-01 | |||
| EN ISO 2398-2008 | Rubber hoses, textile-reinforced, for compressed air - Specification | 2008-11-26 | |||
| EN 15436-1-2008 | Road service area maintenance equipment - Part 1: Terminology | 2008-09-17 | |||
| EN 15475-2009 | Fertilizers - Determination of ammoniacal nitrogen | 2009-01-21 | |||
| EN 15476-2009 | Fertilizers - Determination of nitric and ammoniacal nitrogen according to Devarda | 2009-01-21 | |||
| EN 15477:2009 | Fertilizers - Determination of the water-soluble potassium content | 2009-01-14 | |||
| EN 15478-2009 | Fertilizers - Determination of total nitrogen in urea | 2009-01-21 |
若您对上表中数据有任何疑问，请与网站联系。
