（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN ISO 27587-2009 | Leather - Chemical tests - Determination of the free formaldehyde in process auxiliaries | 2009-10-01 | |||
| EN ISO 28300-2008 | Petroleum, petrochemical and natural gas industries - Venting of atmospheric and low-pressure storage tanks | 2008-06-01 | |||
| EN 599-1-2009 | Durability of wood and wood-based products - Efficacy of preventive wood preservatives as determined by biological tests - Part 1: Specification according to use class | ||||
| EN 621-2009 | Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products | 2009-11-11 | |||
| EN ISO 17059-2009 | Oilseeds - Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method) | 2009-08-05 | |||
| EN ISO 17638-2009 | Non-destructive testing of welds - Magnetic particle testing | 2009-11-11 | |||
| EN 1020-2009 | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products | 2009-11-04 | |||
| EN 1230-1-2009 | Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 1: Odour | 2009-11-04 | |||
| EN ISO 18592-2009 | Resistance welding - Destructive testing of welds - Method for the fatigue testing of multi-spot-welded specimens | 2009-12-15 | |||
| EN 1330-9:2009 | Non-destructive testing - Terminology - Part 9: Terms used in acoustic emission testing | 2009-05-27 | |||
| EN 1349-2009 | Industrial process control valves | 2009-11-11 | |||
| EN 1539-2009 | Dryers and ovens, in which flammable substances are released - Safety requirements | 2009-11-18 | |||
| EN ISO 19141-2009 | Geographic information - Schema for moving features | 2009-08-05 | |||
| EN 1822-5-2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 5: Determining the efficiency of filter elements | 2009-11-18 | |||
| EN 1858:2008+A1:2011 | Chimneys - Components - Concrete flue blocks | 2011-06-29 | |||
| EN ISO 21148-2009 | Cosmetics - Microbiology - General instructions for microbiological examination | 2009-06-17 | |||
| EN ISO 21149-2009 | Cosmetics - Microbiology - Enumeration and detection of aerobic mesophilic bacteria | 2009-06-17 | |||
| EN 46-1-2009 | Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 1: Application by surface treatment (laboratory method) | 2009-11-11 | |||
| EN 46-2-2009 | Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 2: Ovicidal effect (laboratory method) | 2009-11-11 | |||
| EN ISO 21987-2009 | Ophthalmic optics - Mounted spectacle lenses | 2009-10-01 | |||
| EN ISO 15927-2-2009 | Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 2: Hourly data for design cooling load | 2009-02-15 | |||
| EN 15649-7-2009 | Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices | 2009-11-11 | |||
| EN 3529-2010 | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa | 2010-03-10 | |||
| CEN ISO/TR 15462-2009 | Water quality - Selection of tests for biodegradability | 2009-11-11 | |||
| CEN ISO/TS 19139-2009 | Geographic information - Metadata - XML schema implementation | ||||
| CEN/TR 15868-2009 | Survey of national requirements used in conjunction with EN 206-1:2000 | 2009-07-01 | |||
| CEN/TR 15983-2010 | Stationary source emissions - Guidance on the application of EN 14181:2004 | 2010-01-01 | |||
| CR 1030-2-1995 | Hand-arm vibration - Guidelines for vibration hazards reduction - Part 2: Management measures at the workplace | 1995-06-01 | |||
| CR 1100-1993 | Memorandum on health and safety standardization in support of'New Approach' Directives - Application in the field of machinery | ||||
| CR 1350-1993 | Investigation of syntaxes for existing interchange formats to be used in healthcare | 1993-09-01 | |||
| CR 1460-1994 | Packaging - Energy recovery from used packaging | 1994-09-01 | |||
| CR 1750-1999 | Identification Card Systems - Inter-sector Messages Between Devices And Hosts - Acceptor To Acquirer Messages | 1999-04-01 | |||
| CR 1752-1998 | Ventilation for buildings - Design criteria for the indoor environment | 1998-12-01 | |||
| CR 12340-1996 | Packaging - Recommendations for conducting life-cycle inventory analysis of packaging systems | 1996-07-01 | |||
| CR 13695-1-2000 | Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment - Part 1: Requirements for measuring and verifying the four heavy metals present in packaging | 2000-03-22 | |||
| CEN/TS 15022-2:2009 | Copper and copper alloys - Determination of tin content - Part 2: Spectrophotometric method | 2009-12-09 | |||
| EN 12668-1-2010 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments | 2010-02-03 | |||
| CEN/TS 15119-1-2008 | Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 1: Wood held in the storage yard after treatment and wooden commodities exposed in Use Class 3 (not covered, not in contact with the ground) - Laboratory method | 2008-05-21 | |||
| EN 287-6-2010 | Qualification test of welders - Fusion welding - Part 6: Cast iron | 2010-01-13 | |||
| EN 201:2009 | Plastics and rubber machines - Injection moulding machines - Safety requirements | 2009-10-21 | |||
| EN 316:2009 | Wood fibre boards - Definition, classification and symbols | 2009-03-04 | |||
| EN 593-2009 | Industrial valves - Metallic butterfly valves | ||||
| EN 1313-1:2010 | Round and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood sawn timber | 2010-01-27 | |||
| EN 1515-4-2009 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC | 2009-12-16 | |||
| EN 1829-1-2010 | High pressure water jet machines - Safety requirements - Part 1: Machines | 2010-01-27 | |||
| EN 2240-003-2010 | Aerospace series - Lamps, incandescent - Part 003: Lamp, code 44 - Product standard | 2010-01-13 | |||
| EN 2240-004-2010 | Aerospace series - Lamps, incandescent - Part 004: Lamp, code 47 - Product standard | 2010-01-13 | |||
| EN 2240-010:2010 | Aerospace series - Lamps, incandescent - Part 010: Lamp, code 84 - Product standard | 2010-01-13 | |||
| EN 3653-2010 | Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, one lug, in steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 235 Degree C | 2010-01-27 | |||
| EN 4125-2010 | Aerospace series - Nuts, anchor, self-locking, fixed, two lug, reduced series, with incremental counterbore, in heat resisting steel, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 315 °C | 2010-01-27 |
若您对上表中数据有任何疑问，请与网站联系。
