（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN 868-6:2009 | Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods | 2009-05-20 | |||
| EN 868-8-2009 | Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods | 2009-05-20 | |||
| EN 934-3-2009 | Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling | ||||
| EN ISO 15011-1-2009 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis | 2009-10-15 | |||
| EN ISO 15011-2-2009 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc we | 2009-10-15 | |||
| EN ISO 15011-3-2009 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 3: Determination of ozone emission rate during arc welding | 2009-10-15 | |||
| EN 957-5-2009 | Stationary training equipment - Part 5: Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods | 2009-02-11 | |||
| EN ISO 15156-1-2009 | Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials | 2009-10-15 | |||
| EN ISO 15156-2:2009 | Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons | 2009-10-15 | |||
| EN ISO 15156-3-2009 | Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys | ||||
| EN 1264-4-2009 | Water based surface embedded heating and cooling systems - Part 4: Installation [Superseded: CEN EN 15377-2] | 2009-09-02 | |||
| EN ISO 15303-2008 | Animal and vegetable fats and oils - Detection and identification of a volatile organic contaminant by GC/MS | ||||
| EN ISO 20182-2008 | Refractory test-piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns | ||||
| ENV 12694-1997 | Public Transport - Road Vehicles - Dimensional Requirements for Variable Electronic External Signs | ||||
| ENV 12796-1997 | Road Transport and Traffic Telematics - Public Transport - Validators | ||||
| EN 1639-2009 | Dentistry - Medical devices for dentistry - Instruments | ||||
| EN 1641-2009 | Dentistry - Medical devices for dentistry - Materials | ||||
| EN ISO 7579-2009 | Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods | ||||
| EN ISO 287-2009 | Paper and board - Determination of moisture content of a lot - Oven-drying method [Superseded: CEN EN 20287] | ||||
| EN ISO 21627-1-2009 | Plastics - Epoxy resins - Determination of chlorine content - Part 1: Inorganic chlorine | ||||
| EN ISO 21627-2-2009 | Plastics - Epoxy resins - Determination of chlorine content - Part 2: Easily saponifiable chlorine | ||||
| CEN ISO/TS 12813-2009 | Electronic fee collection - Compliance check communication for autonomous systems | ||||
| CEN ISO/TS 17574-2009 | Electronic fee collection - Guidelines for security protection profiles | ||||
| CEN ISO/TS 17892-6-2004 | Geotechnical investigation and testing - Laboratory testing of soil - Part 6: Fall cone test | 2017-03-01 | |||
| CEN ISO/TS 27687-2009 | Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplate | ||||
| CEN/TR 115-3-2009 | Safety of escalators and moving walks - Part 3: Correlation between EN 115:1995 and its amendments and EN 115-1:2008 | ||||
| CEN/TR 1335-4-2009 | Office furniture - Office work chair - Part 4: Clarifications to EN 1335-1:2000 (Dimensions) | ||||
| CEN/TS 14754-1-2007 | Curing compounds - Test methods - Part 1: Determination of water retention efficiency of common curing compounds | ||||
| CEN/TR 15735-2008 | Postal services - Quality of service - Distance to access points | ||||
| CEN/TR 15951-2009 | Pyrotechnic articles - Fireworks, category 4 - Overview of harmonized standards that will be developed by CEN/TC 212/WG 2 | ||||
| CEN/TR 15952-2009 | Pyrotechnic articles - Theatrical pyrotechnic articles, categories T1 and T2 - Overview of harmonized standards that will be developed by CEN/TC 212/WG 3 | ||||
| CEN/TR 15953-2009 | Pyrotechnic articles - Other pyrotechnic articles, category P1 and P2 - Overview of harmonized standards that will be developed by CEN/TC 212/WG 5 | ||||
| CEN/TR 15970-2009 | Pyrotechnic articles - Pyrotechnic articles for vehicles - Overview on work program for EN standards to be developed by CEN/TC 212 WG 4 | ||||
| CEN/TS 81-83-2009 | Safety rules for the construction and installation of lifts - Existing lifts - Part 83: Rules for the improvement of the resistance against vandalism | ||||
| CEN/TS 15873-2009 | Postal Services - Open Standard Interface - Address Data File Format for OCR/VCS Dictionary Generation | ||||
| CEN/TS 15901-6-2009 | Road and airfield surface characteristics - Part 6: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway force coefficient (SFCS): SCRIM | 2009-11-18 | |||
| CEN/TS 15901-7-2009 | Road and airfield surface characteristics - Part 7: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCG): the GripTester | 2009-11-18 | |||
| EN 81-21:2009+A1:2012 | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 21: New passenger and goods passenger lifts in existing building | 2012-08-15 | |||
| EN 480-10-2009 | Admixtures for concrete, mortar and grout - Test methods - Part 10: Determination of water soluble chloride content | 2009-07-29 | |||
| EN 480-13:2009+A1:2011 | Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures | 2011-06-22 | |||
| EN 843-6-2009 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 6: Guidance for fractographic investigation | 2009-08-12 | |||
| EN 1282-2:2005+A1:2009 | Tracheostomy tubes - Part 2: Paediatric tubes | 2009-08-12 | |||
| EN 1822-1-2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 1: Classification, performance testing, marking | 2009-11-18 | |||
| EN 1822-2-2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics | 2009-11-18 | |||
| EN 1822-3-2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 3: Testing flat sheet filter media | ||||
| EN 1822-4-2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 4: Determining leakage of filter elements (scan method) | 2009-11-18 | |||
| EN 1859:2009+A1:2013 | Chimneys - Metal Chimneys - Test Methods | 2013-04-03 | |||
| EN 2240-002-2009 | Aerospace series - Lamps, incandescent - Part 002: Main characteristics | 2009-11-25 | |||
| EN 2240-005-2009 | Aerospace series - Lamps, incandescent - Part 005: Lamp, code 73 - Product standard | 2009-12-02 | |||
| EN 2240-006-2009 | Aerospace series - Lamps, incandescent - Part 006: Lamp, code 73E - Product standard | 2009-12-02 |
若您对上表中数据有任何疑问，请与网站联系。
