(清空日期可显示全部记录)
标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
---|---|---|---|---|---|
EN 13445-6-2009 | Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron | 2009-07-22 | |||
EN 13445-8-2009 | Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys | ||||
EN ISO 676-2009 | Spices and condiments - Botanical nomenclature | 2009-07-01 | |||
EN 15428-2007 | Soil improvers and growing media - Determination of particle size distribution | 2007-09-12 | |||
EN ISO 2503-2009 | Gas welding equipment - Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) [Superseded: CEN EN 13918] | 2009-07-15 | |||
EN 15507-2008 | Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades | 2008-12-10 | |||
EN ISO 105-B05-1995 | Textiles - Tests for Colour Fastness - Part B05: Detection and Assessment of Photochromism | 1995-11-22 | |||
EN ISO 5398-2-2009 | Leather - Chemical determination of chromic oxide content - Part 2: Quantification by colorimetric determination | 2009-01-15 | |||
EN 15698-1-2009 | District heating pipes - Preinsulated bonded twin pipe systems for directly buried hot water networks - Part 1: Twin pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene | 2009-01-21 | |||
EN 15701-2009 | Plastics - Thermoplastic jackets for insulation products for building equipment and industrial installations - Requirements and test methods | 2009-03-04 | |||
EN 15736-2009 | Timber Structures - Test methods - Withdrawal capacity of punched metal plate fasteners in handling and erection of prefabricated trusses | 2009-08-19 | |||
EN 15737-2009 | Timber Structures - Test methods - Torsional resistance of driving in screws | 2009-08-19 | |||
EN 15781-2009 | Animal feeding stuffs - Determination of maduramicin-ammonium by reversed-phase HPLC using post-column derivatisation | 2009-08-05 | |||
EN 15784-2009 | Animal feeding stuffs - Isolation and enumeration of presumptive Bacillus spp. | 2009-09-02 | |||
EN 15785-2009 | Animal feeding stuffs - Isolation and enumeration of Bifidobacterium spp. | 2009-09-02 | |||
EN 15786-2009 | Animal feeding stuffs - Isolation and enumeration of Pediococcus spp. | 2009-09-02 | |||
EN 15787-2009 | Animal feeding stuffs - Isolation and enumeration of Lactobacillus spp. | 2009-09-02 | |||
EN 15788-2009 | Animal feeding stuffs - Isolation and enumeration of Enterococcus (E. faecium) spp. | 2009-09-02 | |||
EN 15789-2009 | Animal feeding stuffs - Isolation and enumeration of yeast probiotic strains | 2009-09-02 | |||
EN 15791-2009 | Animal feeding stuffs - Determination of Deoxynivalenol in animal feed - HPLC method with UV detection and immunoaffinity column clean-up | 2009-09-02 | |||
EN 15792-2009 | Animal feeding stuffs - Determination of zearalenone in animal feed - High performance liquid chromatographic method with fluorescence detection and immunoaffinity column clean-up | 2009-09-02 | |||
EN ISO 5674-2009 | Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria | 2009-02-25 | |||
EN ISO 204-2009 | Metallic materials - Uniaxial creep testing in tension - Method of test [Superseded: CEN EN 10291] | ||||
EN ISO 14896-2009 | Plastics - Polyurethane raw materials - Determination of isocyanate content | 2009-02-01 | |||
EN ISO 6892-1-2009 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature [Superseded: CEN EN 10002-1] | ||||
EN ISO 8257-1-2006 | Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications | 2006-04-01 | |||
EN ISO 11680-1-2008 | Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fitted with an integral combustion engine | ||||
EN ISO 14183-2008 | Animal feeding stuffs - Determination of monensin, narasin and salinomycin contents - Liquid chromatographic method using post-column derivatization | 2008-11-12 | |||
EN ISO 10321-2008 | Geosynthetics - Tensile test for joints/seams by wide-width strip method | 2008-04-15 | |||
EN ISO 11806-2008 | Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety | 2008-10-29 | |||
EN ISO 14314-2009 | Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements | 2009-08-19 | |||
EN ISO 12213-1-2009 | Natural gas - Calculation of compression factor - Part 1: Introduction and guidelines | ||||
EN ISO 12213-2-2009 | Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis | ||||
EN ISO 12213-3-2009 | Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties | ||||
EN ISO 10651-2-2009 | Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 2: Home care ventilators for ventilator-dependent patients | 2009-04-08 | |||
EN ISO 14982-2009 | Agricultural and Forestry Machines - Electromagnetic Compatibility - Test Methods and Acceptance Criteria | 2009-02-25 | |||
EN ISO 18778-2009 | Respiratory equipment - Infant monitors - Particular requirements | 2009-04-15 | |||
ENV 12140-1996 | Fruit and Vegetable Juices - Determination of the Stable Carbon Isotope Ratio (13C/12C) of Sugars from Fruits Juices - Method Using Isotope Ratio Mass Spectrometry | 1996-10-23 | |||
ENV 12141-1996 | Fruit and Vegetable Juices - Determination of the Stable Oxygen Isotope Ratio (18O/16O) of Water from Fruit Juices - Method Using Isotope Ratio Mass Spectrometry | 1996-10-23 | |||
ENV 12142-1996 | Fruit and Vegetable Juices - Determination of the Stable Hydrogen Isotope Ratio (2H/1H) of Water from Fruit Juices - Method Using Isotope Ratio Mass Spectrometry | 1996-10-31 | |||
ENV 12315-1-1996 | Traffic and Traveller Information (TTI) - TTI Messages Via Dedicated Short-Range Communication - Part 1: Data Specification - Downlink (Roadside to Vehicle) | ||||
ENV 12315-2-1996 | Traffic and Traveller Information (TTI) - TTI Messages Via Dedicated Short-Range Communication - Part 2: Data Specification - Uplink (Vehicle to Roadside) | ||||
ENV 12404-1997 | Durability of Wood and Wood-Based Products - Assessment of the Effectiveness of a Masonry Fungicide to Prevent Growth into Wood of Dry Rot Serpula Lacrymans (Schumacher Ex Fries) S.F. Gray - Laboratory Method | ||||
EN ISO 15512-2009 | Plastics - Determination of water content | 2009-07-08 | |||
EN ISO 15609-4-2009 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding | 2009-05-15 | |||
EN ISO 15883-4-2009 | Washer-disinfectors - Part 4: Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes | 2009-06-03 | |||
EN ISO 22794-2009 | Dentistry - Implantable materials for bone filling and augmentation in oral and maxillofacial surgery - Contents of a technical file | 2009-08-19 | |||
EN 299-2009 | Oil pressure atomizing nozzles - Determination of the angle and spray characteristics | 2009-08-19 | |||
EN ISO 26845-2008 | Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods [Superseded: CEN ENV 955-4] | 2008-03-01 | |||
EN ISO 30024-2009 | Animal feeding stuffs - Determination of phytase activity | 2009-07-15 |
若您对上表中数据有任何疑问,请与网站联系。