（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN ISO 12401-2009 | Small craft - Deck safety harness and safety line - Safety requirements and test methods [Superseded: CEN EN 1095] | 2009-08-01 | |||
| EN ISO 10722-2007 | Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material [Superseded: CEN ENV ISO 10722-1] | 2007-05-15 | |||
| EN ISO 10846-5-2009 | Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion | 2009-02-25 | |||
| EN ISO 10940-2009 | Ophthalmic instruments - Fundus cameras | 2009-08-01 | |||
| EN ISO 10944-2009 | Ophthalmic instruments - Synoptophores | 2009-08-01 | |||
| EN ISO 9168-2009 | Dentistry - Hose connectors for air driven dental handpieces [Superseded: CEN EN 29168] | 2009-07-15 | |||
| EN ISO 9612-2009 | Acoustics - Determination of occupational noise exposure - Engineering method | 2009-04-01 | |||
| EN ISO 10139-2-2009 | Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use | 2009-08-01 | |||
| EN ISO 22088-6-2009 | Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 6: Slow strain rate method | 2009-06-24 | |||
| EN ISO 23210-2009 | Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors | 2009-08-01 | |||
| EN ISO 23553-1-2009 | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Shut-off devices for oil burners | 2009-06-10 | |||
| EN ISO 14945-2004 | Small craft - Builder's plate | 2004-04-01 | |||
| EN ISO 17663-2009 | Welding - Quality requirements for heat treatment in connection with welding and allied processes [Superseded: CEN CR ISO 17663] | ||||
| EN ISO 17677-1-2009 | Resistance welding - Vocabulary - Part 1: Spot, projection and seam welding | 2009-07-01 | |||
| EN 933-10-2009 | Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving) | ||||
| EN 1097-8-2009 | Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value | 2009-07-08 | |||
| EN ISO 15008-2009 | Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and test procedures for invehicle visual presentation | 2009-02-15 | |||
| EN 10238-2009 | Automatically blast-cleaned and automatically prefabrication primed structural steel products | 2009-07-15 | |||
| EN 12714-2009 | Plastics drums - Removable head (open head) drums with a nominal capacity of 25 L to 60 L | 2009-07-29 | |||
| CEN ISO/TR 20173-2009 | Welding - Grouping systems for materials - American materials | 2009-10-01 | |||
| CEN/TR 1749-2009 | European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types) | 2009-10-07 | |||
| CEN/TS 14940-1-2009 | Copper and copper alloys - Determination of chromium content - Part 1: Titrimetric method | ||||
| CEN/TR 15840-2009 | Evaluation of conformity of fly ash for concrete - Guidelines for the application of EN 450-2 | ||||
| CEN/TR 15894-2009 | Building hardware - Door fittings for use by children, elderly and disabled people in domestic and public buildings - A guide for specifiers | ||||
| CEN/TR 15913-2009 | Spectator facilities - Layout criteria for viewing area for spectators with special needs | ||||
| CEN/TR 15917-2009 | Textiles - Cosmetotextiles | ||||
| CEN/TS 15606-2009 | Foodstuffs - Determination of acesulfame-K, aspartame, neohesperidine-dihydrochalcone and saccharin - High performance liquid chromatographic method | ||||
| EN 455-2-2009 | Medical gloves for single use - Part 2: Requirements and testing for physical properties | ||||
| EN 778-2009 | Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products | ||||
| EN 937-2009 | Chemicals used for treatment of water intended for human consumption - Chlorine | ||||
| EN 940-2009 | Safety of woodworking machines - Combined woodworking machines | ||||
| EN 868-2-2009 | Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods | ||||
| EN 868-3-2009 | Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods | ||||
| EN 868-4-2009 | Packaging for terminally sterilized medical devices - Part 4: Paper bags - Requirements and test methods | ||||
| EN 868-7-2009 | Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods | ||||
| EN 868-9-2009 | Packaging for terminally sterilized medical devices - Part 9: Uncoated nonwoven materials of polyolefines - Requirements and test methods | ||||
| EN 868-10-2009 | Packaging for terminally sterilized medical devices - Part 10: Adhesive coated nonwoven materials of polyolefines - Requirements and test methods | ||||
| EN 973-2009 | Chemicals used for treatment of water intended for human consumption - Sodium chloride for regeneration of ion exchangers | ||||
| EN 1230-2-2009 | Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint) | ||||
| EN 1405-2009 | Chemicals used for treatment of water intended for human consumption - Sodium alginate | ||||
| EN 1406-2009 | Chemicals used for treatment of water intended for human consumption - Modified starches | ||||
| EN 1640-2009 | Dentistry - Medical devices for dentistry - Equipment | ||||
| EN 1661-1997 | Hexagon nuts with flange | ||||
| EN 2205-2009 | Aerospace series - Steel FE-PL1502 (25CrMo4) - 900 MPa less than or equal to Rm less than or equal to 1 100 MPa - Bars - De less than or equal to 40 mm | ||||
| EN 2240-001-2009 | Aerospace series - Lamps, incandescent - Part 001: Technical specification | ||||
| EN 2815-2009 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D Less than or equal to 200 mm - Rm Greater than or equal to 965 MPa | 2009-09-16 | |||
| EN 2818-2009 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D Less than or equal to 200 mm - Rm Greater than or equal to 1 070 MPa | 2009-09-16 | |||
| EN 4604-002-2009 | Aerospace series - Cable, electrical, for signal transmission - Part 002 : General | 2009-09-16 | |||
| EN 4618-2009 | Aerospace series - Aircraft internal air quality standards, criteria and determination methods | ||||
| EN 3660-016-2009 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 016: Grommet nut, style A, self-locking and non self-locking for EN 3645 - Product standard | 2009-09-30 |
若您对上表中数据有任何疑问，请与网站联系。
