（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN 15089-2009 | Explosion isolation systems | 2009-03-25 | |||
| EN ISO 527-5-2009 | Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites | 2009-07-01 | |||
| EN ISO 660-2009 | Animal and vegetable fats and oils - Determination of acid value and acidity | 2009-06-15 | |||
| EN ISO 10993-1-2009 | Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process | 2009-10-15 | |||
| EN ISO 13337-2009 | Spring-type straight pins - Slotted, light duty | 2009-06-15 | |||
| EN ISO 14723-2009 | Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves | 2009-06-15 | |||
| EN ISO 8185-2009 | Respiratory tract humidifiers for medical use - Particular requirements for respiratory humidification systems | 2009-04-08 | |||
| EN ISO 8230-1-2008 | Safety requirements for dry-cleaning machines - Part 1: Common safety requirements [Superseded: CEN EN ISO 8230] | 2008-10-01 | |||
| EN ISO 8230-2-2008 | Safety requirements for dry-cleaning machines - Part 2: Machines using perchloroethylene [Superseded: CEN EN ISO 8230] | 2008-10-01 | |||
| EN ISO 8230-3-2008 | Safety requirements for dry-cleaning machines - Part 3: Machines using combustible solvents [Superseded: CEN EN ISO 8230] | 2008-10-01 | |||
| EN ISO 14912-2006 | Gas analysis - Conversion of gas mixture composition data | 2006-08-23 | |||
| EN ISO 8359-2009 | Oxygen concentrators for medical use - Safety requirements | ||||
| EN ISO 10343:2009 | Ophthalmic instruments - Ophthalmometers | 2009-07-01 | |||
| EN ISO 8752-2009 | Spring-type straight pins - Slotted, heavy duty | 2009-06-15 | |||
| EN ISO 10644-2009 | Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200 HV and 300 HV | 2009-07-01 | |||
| EN ISO 12215-8-2009 | Small craft - Hull construction and scantlings - Part 8: Rudders | 2009-05-15 | |||
| EN ISO 10862-2009 | Small craft - Quick release system for trapeze harness | ||||
| EN ISO 12499-2008 | Industrial fans - Mechanical safety of fans - Guarding | ||||
| EN 914-2008 | Gymnastic equipment - Parallel bars and combination asymmetric/parallel bars - Requirements and test methods including safety | ||||
| EN ISO 15254-2009 | Ophthalmic optics and instruments - Electro-optical devices for enhancing low vision | ||||
| EN ISO 20079-2006 | Water quality - Determination of the toxic effect of water constituents and waste water on duckweed (Lemna minor) - Duckweed growth inhibition test | 2006-09-01 | |||
| EN ISO 21427-2-2009 | Water quality - Evaluation of genotoxicity by measurement of the induction of micronuclei - Part 2: Mixed population method using the cell line V79 | ||||
| EN ISO 15877-1-2009 | Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General | 2010-11-01 | |||
| EN ISO 15877-2-2009 | Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes | 2009-03-01 | |||
| EN ISO 15877-3-2009 | Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings | 2009-03-01 | |||
| EN ISO 22088-5-2009 | Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 5: Constant tensile deformation method | 2009-06-01 | |||
| EN ISO 23936-1-2009 | Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics | ||||
| EN ISO 25619-1-2008 | Geosynthetics - Determination of compression behaviour - Part 1: Compressive creep properties | 2008-12-01 | |||
| EN ISO 16484-6-2009 | Building automation and control systems (BACS) - Part 6: Data communication conformance testing | 2009-03-01 | 2014-05-01 | ||
| EN 723-2009 | Copper and copper alloys - Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings | 2009-05-01 | |||
| EN ISO 15004-1-2009 | Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments | ||||
| EN 13698-2-2009 | Pallet production specification - Part 2: Construction specification for 1000 mm x 1200 mm flat wooden pallets | 2009-06-01 | |||
| EN 13743-2009 | Safety requirements for coated abrasive products | ||||
| EN 13941-2009 | Design and installation of preinsulated bonded pipe systems for district heating Incorporates Amendment A1: 2010 | 2009-07-01 | |||
| EN ISO 5764-2009 | Milk - Determination of freezing point - Thermistor cryoscope method (Reference method) | ||||
| CEN/TS 15883-2009 | Residential solid fuel burning appliances - Emission test methods | 2009-07-01 | |||
| EN 455-4-2009 | Medical gloves for single use - Part 4: Requirements and testing for shelf life determination | 2009-07-29 | |||
| EN 623-5-2009 | Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 5: Determination of phase volume fraction by evaluation of micrographs | 2009-07-15 | |||
| EN 820-4-2009 | Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 4: Determination of flexural creep deformation at elevated temperatures | ||||
| EN 820-5-2009 | Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures | ||||
| EN 1006-2009 | Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties | ||||
| EN 1071-9-2009 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 9: Determination of fracture strain | ||||
| EN 1090-1-2009 | Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components | ||||
| EN 1332-1-2009 | Identification card systems - Human-machine interface - Part 1: Design principles for the user interface | ||||
| EN 2478-2008 | Aerospace series ?Steel FE-PL2107 (30NiCrMo16) ?1 220 MPa less than or equal to Rm less than or equal to 1 370 MPa ?Bars ?De less than or equal to 40 mm | ||||
| EN 2480-2008 | Aerospace series - Steel FE-PL2108 (36NiCrMo16) - 1 250 MPa = Rm = 1 400 MPa - Bars - De = 75 mm | ||||
| EN 2543-2009 | Aerospace series ?Steel FE-PL1502 (25CrMo4) ?Annealed ?Sheet and strip 0,3 mm less than or equal to a less than or equal to 2 mm ?For prevailing torque nuts | ||||
| EN 3614-2009 | Aerospace series - Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 900 MPa / 650 Degree C | 2009-07-22 | |||
| EN 4071-2009 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 Degree C | 2009-07-22 | |||
| EN 4072-2009 | Aerospace series - Screws, 100 Degrees countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 Degree C | 2009-07-22 |
若您对上表中数据有任何疑问，请与网站联系。
