(清空日期可显示全部记录)
标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
---|---|---|---|---|---|
EN 4074-2009 | Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 degree C | 2009-07-01 | |||
EN 4132-2009 | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 Degrees C | 2009-07-22 | |||
EN 4135-2009 | Aerospace series - Bolts, normal bi-hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 Degree C | 2009-07-01 | |||
EN 4136-2009 | Aerospace series - Bolts, normal bi-hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 degree C | 2009-07-01 | |||
EN 4137-2009 | Aerospace series - Bolts, normal bi-hexagonal head, stepped shank, long thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 degree C | 2009-07-01 | |||
EN 3052-2009 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature) / 425 Degree C | 2009-07-22 | |||
EN 4199-003-2009 | Aerospace series - Bonding straps for aircraft - Part 003: Bonding strap assemblies with flat braided conductor copper, tin plated - 65 Degree C up to 150 Degree C and copper, nickel plated - 65 Degree C up to 260 Degree C - Product standard | 2009-07-22 | |||
EN 4199-004-2009 | Aerospace series - Bonding straps for aircraft - Part 004: Round bonding straps, copper, tin plated - 65 Degree C up to 150 Degree C and nickel plated - 65 Degree C up to 260 Degree C - Product standard | 2009-07-22 | |||
EN 3733-001-2009 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 Degree C continuous - Part 001: Technical specification | 2009-08-05 | |||
EN 4372-2009 | Aerospace series - Heat resisting nickel alloy with copper NI-PD9001 (NiCu31) - Wire for solid rivets - D less than or equal to 10 mm | 2009-02-18 | |||
EN 3329-2009 | Aerospace series - Steel FE-PL1503 (35CrMo4) - Annealead - Sheet and strip - 0,3 mm ≤ a ≤ 2 mm - For prevailing torque nuts | 2009-05-13 | |||
EN 4469-2007 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D Less than or equal to 150 mm - Rm Greater than or equal to 1 400 MPa | 2007-07-11 | |||
EN 4528-2009 | Aerospace series - Steel FE-PA3903 (X10CrNi18-8) - Cold rolled - Strip for springs - a ≤ 3 mm - 1 250 MPa ≤ Rm ≤ 1 640 MPa | 2009-02-18 | |||
EN 2606-2009 | Aerospace series - 60 Degrees interface for adaptors, threaded, with lockring - Geometric configuration | 2009-07-22 | |||
EN 3330-2009 | Aerospace series - Steel FE-PL1503 (35CrMo4) - Annealead - Bar and wire - De less than or equal to 40 mm - For prevailing torque nuts | 2009-03-11 | |||
EN 4635-2009 | Aerospace series - Screws, 100 degrees countersunk head, six lobes recess, short thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 270 MPa (at ambient temperature) / 650 degree C | 2009-07-01 | |||
EN 2755-2009 | Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Elevated load at ambient temperature - Technical specification | 2009-07-15 | |||
EN 2854-002-2009 | Aerospace series - Cables, electrical for general purpose - Cross sections equal to and greater than 9 mm Square - Operating temperatures between - 55 Degree C and 260 Degree C - Part 002: General | 2009-07-01 | |||
EN 4641-102-2009 | Aerospace series - Cables, optical 125 祄 outside diameter cladding - Part 102: Semi-loose 62,5/125 祄 GI fibre nominal 1,8 mm outside diameter - Product standard | 2009-02-11 | |||
EN 4642-2009 | Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Sheet and plate - 0,6 mm less than or equal to a less than or equal to 50 mm - 900 MPa less than or equal to Rm less than or equal to 1 050 MPa | 2009-02-11 | |||
EN 9100-2009 | Aerospace series - Quality management systems - Requirements (based on ISO 9001:2000) and Quality systems - Model for quality assurance in design, development, production, installation and servicing | 2009-08-12 | |||
EN 2883-2009 | Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 degree C | 2009-07-01 | |||
EN 4018-2009 | Aerospace sreies - Pipe coupling 8 Degrees 30' in titanium alloy - Elbows 90 Degrees with thrust wire nut | 2009-07-15 | |||
EN 4024-2009 | Aerospace series - Pipe coupling 8 Degrees 30' in titanium alloy - Elbows 45 Degrees welded end with thrust wire nut | 2009-07-15 | |||
EN 12613-2009 | Plastics warning devices for underground cables and pipelines with visual characteristics | 2009-06-24 | |||
EN 12678-2008 | Chemicals used for treatment of water intended for human consumption - Potassium peroxomonosulfate | 2008-07-30 | |||
EN 12350-1-2009 | Testing fresh concrete - Part 1: Sampling | 2009-03-18 | |||
EN 12707-2009 | Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l and 225 l | 2009-07-29 | |||
EN 13176:2000 | Chemicals used for treatment of water intended for human consumption - Ethanol | 2000-07-19 | |||
EN 13194-2008 | Chemicals used for treatment of water intended for human consumption - Acetic acid | 2008-07-30 | |||
EN 14399-9-2009 | High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies | 2009-03-18 | |||
EN 15037-2:2009+A1:2011 | Precast concrete products - Beam-and-block floor systems - Part 2: Concrete blocks | 2011-02-23 | |||
EN 15037-3:2009+A1:2011 | Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks | 2011-02-23 | |||
EN 14618-2009 | Agglomerated stone - Terminology and classification | 2009-07-01 | |||
EN 14704-2-2007 | Determination of the elasticity of fabrics - Part 2: Multiaxial tests | 2007-02-28 | |||
EN ISO 5492-2009 | Sensory analysis - Vocabulary | 2009-07-15 | |||
EN 15544-2009 | One off Kachelgrund/fen/Putzgrund/fen (tiled/mortared stoves) - Dimensioning | 2009-07-15 | |||
EN ISO 3382-1-2009 | Acoustics - Measurement of room acoustic parameters - Part 1: Performance spaces [Superseded: CEN EN ISO 3382] | ||||
EN 15154-3-2009 | Emergency safety showers - Part 3: Non plumbed-in body showers | ||||
EN 15154-4-2009 | Emergency safety showers - Part 4: Non plumbed-in eyewash units | ||||
EN ISO 659-2009 | Oilseeds - Determination of oil content (Reference method) | ||||
EN ISO 4073-2009 | Dentistry - Information system on the location of dental equipment in the working area of the oral health care provider | ||||
EN 15254-2-2009 | Extended application of results from fire resistance tests - Non-loadbearing walls - Part 2: Masonry and Gypsum Blocks | ||||
EN ISO 1456-2009 | Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium [Superseded: CEN EN 12540] | ||||
EN ISO 1889-2009 | Reinforcement yarns - Determination of linear density | ||||
EN 15461-2008 | Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements | ||||
EN ISO 14509-3-2009 | Small craft - Airborne sound emitted by powered recreational craft - Part 3: Sound assessment using calculation and measurement procedures | ||||
EN ISO 8596-2009 | Ophthalmic optics - Visual acuity testing - Standard optotype and its presentation | ||||
EN ISO 11981-2009 | Ophthalmic optics - Contact lenses and contact lens care products - Determination of physical compatibility of contact lens care products with contact lenses | ||||
EN ISO 14855-2-2009 | Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test | 2009-06-24 |
若您对上表中数据有任何疑问,请与网站联系。