（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN 3155-075-2009 | Aerospace series - Electrical contacts used in elements of connection - Part 075: Contacts, electrical, quadrax, size 8, female, type E, crimp, class R - Product standard | 2009-03-25 | |||
| EN 4536-2-2009 | Aerospace series - Bushes, plain in corrosion resisting steel with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series | 2009-07-01 | |||
| EN 4537-2-2009 | Aerospace series - Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series | ||||
| EN 4632-001-2008 | Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 001: General requirements | ||||
| EN 3373-014-2009 | Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 014: In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 200 Degree C - Product standard | 2009-03-11 | |||
| EN 4020-2009 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 90°, welded end with thrust wire nut | 2009-07-01 | |||
| EN 2950-2008 | Aerospace series - Test method - Wrought heat resisting alloys Semi-finished products and parts - Conditions for macrographic and micrographic examination - Atlas of structures and defects | 2008-08-13 | |||
| EN 3613-2009 | Aerospace series - Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting nickel base alloy NIPH2601 (Inconel 718), silver plated - Classification: 1 275 MPa/650 Degree C | 2009-07-01 | |||
| EN 4127-2009 | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 Degree C | 2009-07-01 | |||
| EN 4128-2009 | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1 250 MPa (at ambient temperature) / 425 Degree C | 2009-07-01 | |||
| EN 10225-2009 | Weldable structural steels for fixed offshore structures - Technical delivery conditions | 2009-07-01 | |||
| EN 12374-2009 | Packaging - Flexible tubes - Terminology | 2009-06-24 | |||
| EN 12808-4:2009 | Grouts for tiles - Part 4: Determination of shrinkage | 2009-07-01 | |||
| EN 13149-2-2004 | Public transport - Road vehicle scheduling and control systems - Part 2: WORLDFIP cabling specifications | 2004-08-18 | |||
| EN 13219-2008 | Gymnastic equipment - Trampolines - Functional and safety requirements, test methods | 2008-11-05 | |||
| EN 12572-2-2008 | Artificial climbing structures - Part 2: Safety requirements and test methods for bouldering walls [Superseded: CEN EN 12572] | ||||
| EN 12572-3-2008 | Artificial climbing structures - Part 3: Safety requirements and test methods for climbing holds [Superseded: CEN EN 12572] | 2008-11-05 | |||
| EN 13045-2009 | Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances | 2009-04-22 | |||
| EN 14188-4-2009 | Joint fillers and sealants - Part 4: Specifications for primers to be used with joint sealants | 2009-07-08 | |||
| EN 15016-1-2004 | Technical drawings - Railway applications - Part 1: General Principles | 2004-06-02 | |||
| EN 15016-2-2004 | Technical drawings - Railway applications - Part 2: Parts lists | 2004-06-02 | |||
| EN 15016-3-2004 | Technical drawings - Railway applications - Part 3: Handling of modifications of technical documents | 2004-06-02 | |||
| EN 15016-4-2006 | Technical drawings - Railway applications - Part 4: Data exchange | 2006-02-15 | |||
| EN 14399-10-2009 | High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload | 2009-03-18 | |||
| EN 14081-4-2009 | Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine grading - Grading machine settings for machine controlled systems | 2009-05-06 | |||
| EN ISO 845-2009 | Cellular plastics and rubbers - Determination of apparent density | 2009-06-24 | |||
| EN ISO 948-2009 | Spices and condiments - Sampling | ||||
| EN ISO 1628-1-2009 | Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles | ||||
| EN 15466-1-2009 | Primers for cold and hot applied joint sealants - Part 1: Determination of homogeneity | ||||
| EN 15466-2-2009 | Primers for cold and hot applied joint sealants - Part 2: Determination of resistance against alkali | ||||
| EN 15466-3-2009 | Primers for cold and hot applied joint sealants - Part 3: Determination of solids content and evaporation behaviour of volatiles | ||||
| EN ISO 5366-1-2009 | Anaesthetic and respiratory equipment - Tracheostomy tubes - Part 1: Tubes and connectors for use in adults | ||||
| EN ISO 105-D02-1995 | Textiles - Tests for colour fastness - Part D02: Colour fastness to rubbing: Organic solvents | ||||
| EN ISO 5983-2-2009 | Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Part 2: Block digestion and steam distillation method | ||||
| EN ISO 105-N02-1995 | Bxtiles - Tests for colour fastness - Part N02: Colour fastness to bleaching - Peroxide | ||||
| EN ISO 105-N03-1995 | Textiles - Tests for colour fastness - Part N03: Colour fastness to bleaching - Sodium chlorite (mild) | ||||
| EN ISO 105-N04-1995 | Textiles - Tests for colour fastness - Part N04: Colour fastness to bleaching - Sodium chlorite (severe) | ||||
| EN ISO 105-N05-1995 | Textiles - Tests for colour fastness - Part N05: Colour fastness to stoving | ||||
| EN ISO 105-P01-1995 | Textiles - Test for Colour Fastness - Part P01: Colour Fastness to Dry Heat (Excluding Pressing) | ||||
| EN 15741-2009 | Animal feeding stuffs - Determination of OC-pesticides and PCB's by GC/MS | ||||
| EN 15742-2009 | Animal feeding stuffs - Determination of OC-pesticides and PCB's by GC/ECD | ||||
| EN ISO 3327-2009 | Hardmetals - Determination of transverse rupture strength [Superseded: CEN EN 23327] | ||||
| EN 15767-1-2009 | Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable monitors - Part 1: General requirements for portable monitor assemblies | 2009-06-03 | |||
| EN 15767-2:2009 | Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable monitors - Part 2: Water nozzles | 2009-06-03 | |||
| EN 16001-2009 | Energy management systems - Requirements with guidance for use | ||||
| EN ISO 6465-2009 | Spices - Cumin (Cuminum cyminum L.) - Specification | 2009-07-01 | |||
| EN ISO 3630-4:2009 | Dentistry - Root canal instruments - Part 4: Auxiliary instruments | 2009-07-01 | |||
| EN 15085-2-2007 | Railway applications - Welding of railway vehicles and components - Part 2: Quality requirements and certification of welding manufacturer | 2007-10-24 | |||
| EN 15085-4-2007 | Railway applications - Welding of railway vehicles and components - Part 4: Production requirements | 2007-10-24 | |||
| EN 15085-5-2007 | Railway applications - Welding of railway vehicles and components - Part 5: Inspection, testing and documentation | 2007-10-24 |
若您对上表中数据有任何疑问，请与网站联系。
