检索关键词：

标准分类：

发布时间：

（清空日期可显示全部记录）

标准编号 标准名称 发布日期 实施日期 废止日期 替换信息
EN ISO 9117-1-2009 Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time 2009-05-15
EN ISO 11810-1-2009 Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Part 1: Primary ignition and penetration 2009-04-15
CEN/TR 15855-2009 Construction products - Assessment of release of dangerous substances - Barriers to trade 2009-03-11
CEN/TR 15858-2009 Construction products - Assessment of the release of regulated dangerous substances from construction products based on the WT, WFT/FT procedures 2009-03-25
EN 415-9-2009 Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 2009-08-12
EN 486-2009 Aluminium and aluminium alloys - Extrusion ingots - Specifications 2009-08-26
EN 487-2009 Aluminium and aluminium alloys - Rolling ingots - Specifications 2009-08-26
EN 913-2008 Gymnastic equipment - General safety requirements and test methods 2008-11-05
EN 1337-8-2007 Structural bearings - Part 8: Guide Bearings and Restraint Bearings 2007-10-10
EN 2115-2009 Aerospace series - Aluminium alloy 2117-T42 - Wire for solid rivets - D less than or equal to 10 mm 2009-02-11
EN 2116-2009 Aerospace series - Aluminium alloy 2017A-T42 - Wire for solid rivets - D less than or equal to 10 mm 2009-02-11
EN 2117-2009 Aerospace series - Aluminium alloy AL-P5056A (5056A)-H32 - Wire for solid rivets - D ≤ 10 mm 2009-02-11
EN 2206-2008 Aerospace series - Steel FE-PL1502 (25CrMo4) - 650 MPa less than or equal to Rm less than or equal to 850 MPa - Bars - De less than or equal to 150 mm
EN 2209-2008 Aerospace series - Steel FE-PL1502 (25CrMo4) - 900 MPa ≤ Rm ≤ 1 100 MPa - Sheets, strips and plates - 0,5 mm ≤ a ≤ 20 mm 2008-11-26
EN 2398-2008 Aerospace series - Heat resisting steel FE-PA2601 (X6NiCrTiMoV26-15) - Rm ≥ 900 MPa - Bars for machined bolts - D ≤ 25 mm 2008-03-26
EN 2399-2008 Aerospace series - Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15) - Rm ≥ 900 MPa - Bars for forged bolts - D ≤ 25 mm 2008-04-23
EN 2438-2008 Aerospace series - Steel FE-PL2102 (35NiCr6) - 900 MPa less than or equal to Rm less than or equal to 1 100 MPa - Bars - De less than or equal to 40 mm 2008-11-26
EN 2439-2009 Aerospace series - Steel FE-PL2102 (34NiCr6) - 900 MPa less than or equal to Rm less than or equal to 1 100 MPa - Forgings - De less than or equal to 40 mm 2009-02-11
EN 2446-2008 Aerospace series - Steel FE-PL1503 (35CrMo4) - 1 100 MPa less than or equal to Rm less than or equal to 1 300 MPa - Bars - De less than or equal to 25 mm 2008-11-26
EN 2448-2008 Aerospace series - Steel FE-PL1503 (35CrMo4) - 900 MPa less than or equal to Rm less than or equal to 1 100 MPa - Bars - De less than or equal to 40 mm 2008-11-26
EN 2460-2009 Aerospace series - Steel FE-PM1901 (X12CrNi13) - 600 MPa less than or equal to Rm less than or equal to 800 MPa - Bars - De less than or equal to 70 mm 2009-02-11
EN 2461-2009 Aerospace Series - Steel Fe-pm1901 (x12cr13) - 600 Mpa <= R[m] <= 800 Mpa - Forgings - D[e] <= 70 Mm 2009-02-11
EN 2466-2009 Aerospace series - Steel FE-PA3901 (X2CrNi19-11) - Softened - Forgings - De Less than or equal to 100 mm 2009-02-11
EN 3745-410-2007 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410: Thermal life 2007-08-22
EN 3745-506-2009 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 506: Impact resistance 2009-08-05
EN 4604-008-2009 Aerospace series - Cable, electrical, for signal transmission - Part 008: Cable, coaxial, 50 ohms, 200 Degrees C., Type WD - Product standard 2009-08-19
EN 3389-2009 Aerospace series - Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH1302 (Waspaloy) - Classification: 1 210 MPa/730 degree C - Manufacturing method optional - Technical specification 2009-02-25
EN 3431-2007 Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, silver plated - Classification: 1 100 MPa (at ambient temperature) / 425 癈 2007-12-12
EN 3475-407-2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 407: Flammability 2009-08-19
EN 2812-2009 Aerospace series - Stripping of electric cable 2009-08-12
EN 3475-515-2009 Aerospace series - Cable, electrical, aircraft use - Test methods - Part 515: Crush resistance 2009-08-19
EN 4632-002-2008 Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assemblies aluminium and aluminium alloys 2008-04-23
EN 3475-812-2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 812: Return loss (VSWR) 2009-08-19
EN 9131-2009 Aerospace series - Quality management systems - Nonconformance documentation 2009-04-08
EN 10028-6-2009 Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
EN 3115-2009 Aerospace series - Aluminium alloy 7050-T73 - Wire for solid rivets - D less than or equal to 10 mm
EN 3155-009-2009 Aerospace series - Electrical contacts used in elements of connection - Part 009: Contacts, electrical, female, type A, crimp, class S - Product standard
EN 4301-2009 Aerospace series - Identification marking methods for engine items - Engineering requirements
EN 10315-2006 Routine method for analysis of high alloy steel by X-ray Fluorescence Spectrometry (XRF) by using a near by technique
EN 12369-3-2008 Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels
EN 13354-2008 Solid wood panels (SWP) - Bonding quality - Test method
EN 12504-1-2009 Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression
EN 12926-2008 Chemicals used for treatment of water intended for human consumption - Sodium peroxodisulfate
EN 12591-2009 Bitumen and bituminous binders - Specifications for paving grade bitumens 2009-05-01
EN 13751-2009 Foodstuffs - Detection of irradiated food using photostimulated luminescence
EN 13445-1-2009 Unfired pressure vessels - Part 1: General 2009-07-01 2014-09-01
EN 13445-2-2009 Unfired pressure vessels - Part 2: Materials
EN 13445-3-2009 Unfired pressure vessels - Part 3: Design 2009-07-01 2014-09-01
EN 13445-4-2009 Unfired pressure vessels - Part 4: Fabrication 2009-07-01 2014-09-01
EN 13445-5-2009 Unfired pressure vessels - Part 5: Inspection and testing 2009-07-01
776140 条记录 10212/15523 页 第一页 <上一页  10208   10209   10210   10211  10212  10213   10214   10215   10216  下一页> 最后一页

若您对上表中数据有任何疑问，请与网站联系。