检索关键词：

标准分类：

发布时间：

（清空日期可显示全部记录）

标准编号 标准名称 发布日期 实施日期 废止日期 替换信息
AIA/NAS NASM 14201-2011 Revision 2 Nut, Floating, Self Locking, Attached Retention Element (A.R.E.), 450 Degrees F, Steel, 125 Ksi Ftu, Able Nut Element, 1/64 Oversize Repair 2011-05-27
AIA/NAS NASM 20392-2011 Revision 1 Pin, Straight, Headed Drilled Shank 2011-05-27
AIA/NAS NASM 20427-2011 Revision 2 Rivet, Solid, 100 Degrees Countersunk Head, Carbon Steel, Corrosion-Resistant Steel, Nickel-Copper And Copper 2011-07-29
AIA/NAS NASM 20601-2011 Revision 1 Rivet, Blind, Structural, Pull Stem, Self-Plugging, 100 Degrees Flush Head, Type 2 2011-07-29
AIA/NAS NASM 20605-2011 Revision 2 Rivet, Blind, Nonstructural, 100 Degrees Flush Head 2011-06-30
AIA/NAS NASM 21057-2011 Revision 1 Nut, Self-Locking, Plate, Corner, 100 Degrees Csk, Low Height, Alloy Steel, 125 Ksi Ftu, 450 Degrees F 2011-07-29
AIA/NAS NASM 16491-2011 Revision 1 Grommet, Metallic, General Specification For 2011-07-29
AIA/NAS NASM 16491/1-2011 Revision 1 Grommet, Metallic, Plain, With Toothed Washer (Type 2) 2011-07-29
AIA/NAS NASM 3212-2011 Revision 1 Screw, Machine, Pan Head, Cross-Recessed, Self-Sealing, Integral Silicone O-Ring, Plain And Self-Locking 2011-05-27
AIA/NAS NASM 3213-2011 Revision 1 Screw, Machine, Pan Head, Cross-Recessed, Self-Sealing, Integral Fluorosilicone O-Ring, Plain And Self-Locking 2011-06-30
AIA/NAS NASM 5501/32-2011 Revision 1 Cap-D Type, Esd Protective, Electrical Connector 2011-05-27
AIA/NAS NASM 21084-2011 Revision 1 Nut, Self-Locking, Steel, 220 Ksi Ftu, 450 Degrees F, Flanged, Ms33787 Wrenching Element 2011-07-29
AIA/NAS NASM 21087-2011 Revision 1 Nut, Self-Locking, Plate, Side By Side, Reduced Rivet Spacing, Low Height, Cres, 125 Ksi Ftu, 450 Degrees F & 800 Degrees F 2011-06-30
AIA/NAS NASM 21093-2011 Revision 1 Screw, Self-Locking, 250 Degrees F, Steel, 55 Ksi Ftu, 100 Degrees Flat Head, Cross Recessed 2011-06-30
AIA/NAS NASM21094-2011 BOLT, SELF-LOCKING, 250 癋, STEEL, 75 KSI Fsu, 125 KSI Ftu, HEX HEAD Rev 1 [Superseded: DLA MS21094 CANC NOTICE 1, DLA MS21094 (1), DLA MS21094]
AIA/NAS NASM 21125-2011 Revision 1 Bolt, Self-Retaining, Positive Locking, Cres, 90 Ksi Fsu, 63 Ksi Ftu, Pan Head, 450 Degrees F & 650 Degrees F 2011-05-27
AIA/NAS NASM 23964-2011 Revision 1 Bolt, Self-Retaining, Positive Locking 2011-07-29
AIA/NAS NASM 24665-2011 Revision 1 Pin, Cotter (Split) 2011-05-27
AIA/NAS NASM 24692-2011 Revision 1 Pin, Tapered, Plain 2011-05-27
AIA/NAS NASM 25087-2011 Revision 1 Screw, Externally Relieved Body 2011-06-30
AIA/NAS NA 0147-2011 Revision 2 Insert, Screw Thread, Key Locked, A286 Cres, Miniature, Metric 2011-09-30
AIA/NAS NA 0148-2011 Revision 2 Insert, Screw Thread, Key Locked, Alloy Steel, Lightweight, Metric 2011-09-30
AIA/NAS NASM 33557-2011 Revision 1 Nonstructural Rivets For Blind Attachment - Limitations For Design And Usage 2011-06-30
AIA/NAS NASM 35338-2011 Revision 1 Washer, Lock-Spring, Helical, Regular (Medium) Series 2011-07-29
AIA/NAS NASM 35671-2011 Revision 1 Pin, Grooved, Headless, Longitudinal Taper Groove, Carbon Steel 2011-07-29
AIA/NAS NASM 35675-2011 Revision 1 Pin, Grooved, Headless, Longitudinal Straight Groove, Corrosion-Resisting Steel 2011-06-30
AIA/NAS NASM 45595/1-2011 Revision 1 Washer, Shouldered, Polyamide (Nylon) 2011-07-29
AIA/NAS NASM 45595/7-2011 Revision 1 Washer, Concave, Steel, Alloy 2011-07-29
AIA/NAS NASM 28728/2-2011 Revision 1 Dial, Control, Multiturn Counters, Vernier, 1.75 Diameter 2011-05-27
AIA/NAS NASM 21143/2-2011 Revision 1 Pin, Straight, Headless, (Dowel) (.0002 Under Size), Cres 303 2011-07-29
AIA/NAS NASM 21287-2011 Revision 1 Screw, Machine, Steel, Drilled Double Hexagon, Extended Washer, .1640-36, (As8879 Thread) 2011-07-29
AIA/NAS NASM 51575-2011 Revision 1 Screw, Shoulder, Slotted-Head, Cres 2011-06-30
AIA/NAS NASM 51862-2011 Revision 1 Screw, Tapping, Thread Forming, Type Ab, Flat 82 Degrees Countersunk Head, Cross-Recessed 2011-06-30
AIA/NAS NASM 122236-122275-2011 Revision 1 Insert, Cres Helical Coil Coarse Thread, 3 Dia Nominal Length 2011-06-30
AIA/NAS NASM 124771-124810-2011 Revision 1 Insert, Cres, Helical Coil Fine Thread, 2-1/2 Dia Nominal Length 2011-06-30
AIA/NAS NASM 124811-124850-2011 Revision 1 Insert, Cres, Helical Coil Fine Thread, Thread, 3 Diameter Nominal Length 2011-06-30
AIA/NAS NASM 82496-2011 Revision 1 Screws, Machine, Self-Sealing, Integral O-Ring 2011-06-30
AIA/NAS NA 0027-0028-2011 Revision 3 Nut, Self-Locking, Floating, Plate, Two-Lug, Low Height, Counterbored, 1100 Mpa, 235 Degrees C, 425 Degrees C, Metric 2011-09-30
AIA/NAS NA 0035-2011 Revision 3 Screw, Close Tolerance, Pan Head, Offset Cruciform Recess, Alloy Steel, 1100 Mpa, Metric 2011-10-28
AIA/NAS NA 0038-2011 Revision 4 Screw, Close Tolerance, 100 Degrees Flush Head, Offset Cruciform Recess, Alloy Steel, 660 Mpa Shear, Metric 2011-08-26
AIA/NAS NA 0042-2011 Revision 4 Screw, Close Tolerance, 100 Degrees Flush Head, Offset Cruciform Recess, A286 Cres, 660 Mpa Shear, Metric 2011-09-30
AIA/NAS NA 0046-2011 Revision 3 Screw, Close Tolerance, Pan Head, Offset Cruciform Recess, A286 Cres, 1100 Mpa, Metric 2011-09-30
AIA/NAS NA 0113-2011 Revision 6 Screw, Hex Head, Offset Cruciform Recess, Titanium, Full Thread, 1100 Mpa, Metric 2011-08-26
AIA/NAS NA 0146-2011 Revision 2 Insert, Screw Thread, Key Locked, Alloy Steel, Miniature, Metric 2011-09-30
AIA/NAS NA 0149-2011 Revision 2 Insert, Screw Thread Key Locked, A286 Cres, Lightweight, Metric 2011-09-30
AIA/NAS NA 0152-2011 Revision 2 Bolt, Eye, Alloy Steel, 1100 Mpa, Metric 2011-08-26
AIA/NAS NA 0154-2011 Revision 1 Rivets, Solid, Aluminum And Aluminum Alloy, Metric, Procurement Specification For 2011-10-28
AIA/NAS NA 0221-0224-2011 Revision 1 Post, Electrical-Mechanical Equipment, Internal Thread Type, Metric 2011-08-26
AIA/NAS NA 0246-2011 Revision 1 Balls, Bearing, Chrome Alloy Steel, Metric 2011-10-28
AIA/NAS NA 0253-2011 Revision 1 Bolt, Shoulder, Hexagon Head Alloy Steel, 1100 Mpa Tensile, Metric 2011-08-26
776140 条记录 10519/15523 页 第一页 <上一页  10515   10516   10517   10518  10519  10520   10521   10522   10523  下一页> 最后一页

若您对上表中数据有任何疑问，请与网站联系。