行业标准数据检索

AIA/NAS 9309-2011 Revision 4

Rivet, Blind, 100 Degrees Flush Shear Head, Mechanically Locked Spindle, Bulbed, Style A, Class 3, Code M

2011-08-26

AIA/NAS NASM 501-2011 Revision 1

Screw, Machine, Fillister Head, Fine Thread

2011-09-30

AIA/NAS NASM 1312-4-2011 Revision 1

Fastener Test Methods Method 4 Lap Joint Shear

2011-09-30

AIA/NAS NASM 1312-8-2011 Revision 2

Fastener Test Methods, Method 8, Tensile Strength

2011-08-26

AIA/NAS NASM 1312-16-2011 Revision 1

Fastener Test Methods Method 16 Clamping Force For Installation, Formed Fasteners

2011-10-28

AIA/NAS NASM 1312-20-2011 Revision 1

Fastener Test Methods Method 20 Single Shear

2011-09-30

AIA/NAS 4450-2011 Revision 3

Pin, Crimp, Protruding Shear Head

2011-09-30

AIA/NAS 5314-2011 Revision 1

Screw, Shear, Pan Head, Close Tolerance, Short Thread, Nas1800 Six Lobe Recess, 95 Ksi Fsu

2011-09-30

AIA/NAS 5318-2011 Revision 1

Bolt, Shear, Flat Pan Head, Close Tolerance, Long Thread, Non-Locking And Self-Locking, Nas1800 Six Lobe Recess, 95 Ksi Fsu

2011-09-30

AIA/NAS 5321-2011 Revision 1

Bolt, Shear, 100 Degree Flush Head, Close Tolerance, Nas1800 Six Lobe Recess, 108 Ksi Fsu

2011-08-26

AIA/NAS NASM 1312-31-2011 Revision 1

Fastener Test Methods Method 31 Torque

2011-08-26

AIA/NAS NASM 3498-2011 Revision 1

Screw Assembly, Panel

2011-10-28

AIA/NAS NASM 14179-2011 Revision 1

Nut, Plate, Self-Locking, Floating, Two Lug, Reduced Rivet Spacing, Steel, (Polyimide Insert) 500 Cycles Reuse, Able Nut, 160 Ksi Ftu, 450 Degrees F

2011-10-28

AIA/NAS NASM 16205-2011 Revision 1

Bolt, Machine, Regular Semi-Finished Hexagon Head, Copper-Silicon Alloy (Silicon Bronze), Unc-2A, Non-Magnetic

2011-09-30

AIA/NAS NASM16491/2-2011

GROMMET, METALLIC, OBLONG, WITH FLAT WASHER (TYPE IV) Rev 1 [Superseded: DLA MIL-G-16491/2 CANC NOTICE 1, DLA MIL-G-16491/2]

AIA/NAS NASM 17984-2011 Revision 1

Pin, Quick Release, Self-Retaining, Positive Locking, Single Acting, Button Handle

2011-10-28

AIA/NAS NASM 20501-2011 Revision 1

Nut, Self-Locking, Plate, Two Lug, 1200 Degrees F, 125 Ksi Ftu

2011-10-28

AIA/NAS NASM 21046-2011 Revision 2

Nut, Self-Locking, Hexagon, Regular Height, 800 Degrees F, 125 Ksi Ftu

2011-10-28

AIA/NAS NASM 21049-2011 Revision 2

Nut, Self-Locking, Plate, Two Lug, 100 Degrees Csk, Low Height, Steel, 125 Ksi Ftu, 450 Degrees F

2011-10-28

AIA/NAS NASM 21055-2011 Revision 1

Nut, Self-Locking, Plate, Corner, Low Height, Steel, 125 Ksi Ftu, 450 Degrees F

2011-09-30

AIA/NAS NASM 21056-2011 Revision 1

Nut, Self-Locking, Plate, Corner, Low Height, Cres, 125 Ksi Ftu, 450 Degrees F & 800 Degrees F

2011-09-30

AIA/NAS NASM 21065-2011 Revision 1

Nut, Self-Locking, Channel, Floating, Low Height, Cres, 125 Ksi Ftu, 450 Degrees F & 800 Degrees F

2011-08-29

AIA/NAS NASM 7839-2011 Revision 1

Screws, Structural, Aircraft

2011-08-26

AIA/NAS NASM 27981-2011 Revision 1

Fasteners, Snap Style 2A, Small Wire Spring, Clamp Type

2011-10-28

AIA/NAS NASM 33602-2011 Revision 1

Bolts, Self-Retaining, Aircraft, Reliability And Maintainability, Design And Usage Requirements For

2011-10-28

AIA/NAS NASM 33750-2011 Revision 1

Recess, Dovetail Slot And Conical Dovetail Slot, Dimensions Of Recess, Gage And Driver For

2011-09-30

AIA/NAS NASM 33781-2011 Revision 3

Recess, Offset Cruciform, Dimensions Of Recess, Gage And Driver For

2011-08-26

AIA/NAS NASM 35191-2011 Revision 1

Screw, Machine, 82 Degrees Flat Countersunk Head, Cross-Recessed, Carbon Steel, Cadmium Plated, Unf-2A

2011-08-26

AIA/NAS NASM 35198-2011 Revision 1

Screw, Machine, Flat Countersunk Head, 82 Degrees Cross-Recessed, Brass, Unc-2A

2011-09-30

AIA/NAS NASM 35202-2011 Revision 1

Screw, Machine, Flat Countersunk Head, 82 Degrees, Cross-Recessed, Aluminum Alloy, Anodic Coated, Unc-2A

2011-10-28

AIA/NAS NASM 35678-2011 Revision 1

Pin, Grooved, Headless, Longitudinal Center Groove, Corrosion Resisting Steel

2011-08-26

AIA/NAS NASM 35756-2011 Revision 1

Key, Woodruff, Steel, Alloy, With Keyway And Key Slot Dimensions

2011-10-28

AIA/NAS NASM 35812-2011 Revision 1

Clevis, Rod End, Adjustable And Plain, Steel

2011-08-26

AIA/NAS NASM 43770/1-2011 Revision 1

Snap Hooks, Wire Body, Fixed Loop Eye, Flat Spring Closure, With Retainer

2011-08-26

AIA/NAS NASM 21081-2011 Revision 1

Nut, Self-Locking, Plate, Corner, Non-Metallic Insert, Steel, 125 Ksi Ftu, 250 Degrees F

2011-09-30

AIA/NAS NASM 21090-2011 Revision 1

Screw, Self-Locking, 250 Degrees F, Steel, 55 Ksi Ftu, Pan Head, Cross Recessed

2011-08-26

AIA/NAS NASM 21262-2011 Revision 1

Screws, Self Locking, 250 Degrees F, Cylindrical Head, Hexagonal Wrenching Socket, Alloy Steel, 160 Ksi Ftu, (Socket Head Cap Screws)

2011-09-30

AIA/NAS NASM 21295-2011 Revision 1

Screws, Self Locking, 250 Degrees F, Cylindrical Head, Hexagonal Wrenching Socket, Cres, 80 Ksi Ftu, (Socket Head Cap Screws)

2011-09-30

AIA/NAS NASM 21314-2011 Revision 2

Strap, Retaining, Two Hole, For Pipe, Conduit, And Cable

2011-10-28

AIA/NAS NASM 21385-2011 Revision 1

Knobs, Tactile Series, Illuminated And Non-Illuminated

2011-10-28

AIA/NAS NASM 21386-2011 Revision 1

Knobs, Round, Concentric Illuminated And Non-Illuminated

2011-10-28

AIA/NAS NASM 21387-2011 Revision 1

Knob, Round Illuminated And Non-Illuminated, Small

2011-09-30

AIA/NAS NASM 24066/2-2011 Revision 1

Clip, Solid, Spring Tension

2011-09-30

AIA/NAS NASM 24066/3-2011 Revision 1

Clip, Single Slot, Spring Tension

2011-09-30

AIA/NAS NASM 24667-2011 Revision 1

Screw, Cap, Socket Head, Flat Countersunk, 82 Degrees, Alloy Steel, Unc-3A

2011-08-26

AIA/NAS NASM 45908-2011 Revision 1

Bolt, Eye, General Specification For

2011-08-26

AIA/NAS NASM 45909-2011 Revision 1

Stud, Locked In, Ring Locked, Serrated, General Specification For

2011-08-26

AIA/NAS NASM 51096-2011 Revision 1

Screw, Cap, Hexagon Head (Finished Hexagon Bolt), Head Drilled For Locking Wire, Steel, Grade 5, Cadmium Plated, Unf-2A, Plain And Self-Locking

2011-10-28

AIA/NAS NASM 51400-2011 Revision 1

Pin, Straight, Headless

2011-09-30

AIA/NAS NASM 51838-2011 Revision 1

Pin, Straight, Steel, Drill Rod

2011-08-26