行业标准数据检索

AIA/NAS NASM 43770/10-2012 Revision 1

Snap Hooks, Cast Body, Fixed Loop Eye W/O Roller, Flat Spring Closure, Wide Mouth

2012-01-27

AIA/NAS NASM 45938/11-2012 Revision 1

Nut, Plain, Clinch And Nut, Self-Locking, Clinch (Floating, 400 Degrees F)

2012-01-27

AIA/NAS NASM 45938/14-2012 Revision 1

Nut, Plain, Clinch And Nut, Self-Locking, Clinch, Self-Clinching, Knurled Collar, Floating, 450 Degrees F And 600 Degrees F

2012-01-27

AIA/NAS NA 0087-0088-2012 Revision 4

Nut, Self-Locking, Plate, Floating, Side By Side, Reduced Rivet Spacing, Low Height, Cbored, 900 Mpa, Metric, 235 Degrees C, 425 Degrees C

2012-02-29

AIA/NAS NA 0139-2012 Revision 1

Keyway And Key Slot Dimensions Metric

2012-02-29

AIA/NAS NA 0156-2012 Revision 1

Male Threaded Fasteners, Metric Design, Parameters For

2012-02-29

AIA/NAS NA 0175-0177-2012 Revision 1

Spacer, Sleeve, Non Metallic, Screw And Bolt, Metric

2012-02-29

AIA/NAS NA 0211-0213-2012 Revision 2

Post, Electrical, Mechanical Equipment, Swage Type, Metric

2012-02-29

AIA/NAS NA 0243-2012 Revision 1

Insert, Sandwich Panel, Molded In, Blind Threaded, Self-Locking, Cres, Metric

2012-02-29

AIA/NAS 357-2012 Revision 5

Tube, Control, Aluminum Alloy

2012-02-29

AIA/NAS 359-2012 Revision 7

Tube Assembly, Control, Steel, With Welded Clevis And Threaded Rod Ends

2012-02-29

AIA/NAS 592-2012 Revision 6

Ring, Rigid Tube Connector, Aluminum

2012-02-29

AIA/NAS 672-2012 Revision 8

Plating, High Strength Steels, Cadmium

2012-02-29

AIA/NAS 838-2012 Revision 1

Plug, Protective, Flareless Tube End, Plastic

2012-02-29

AIA/NAS 1052-2012 Revision 3

S Hook, Alloy Steel, For Ground Support Equipment

2012-02-29

AIA/NAS 1060-2012 Revision 3

Bus, High Temperature, Terminal Block

2012-02-29

AIA/NAS 1077-2012 Revision 1

Fitting End, Hose, Standard Dimensions For Flareless Tube

2012-02-29

AIA/NAS 1097-2012 Revision 10

Rivet, Solid, 100 Degrees Flush Shear Head, Aluminum Alloy, Titanium Columbium Alloy

2012-02-29

AIA/NAS 1424-1432-2012 Revision 5

Pin, Swage Locking, Steel, Protruding Head, Shear, Stump-Type

2012-02-29

AIA/NAS 1732-2012 Revision 2

Nut, Blind, Serrated Head, Self-Locking, Closed End, 450 Degrees F

2012-02-29

AIA/NAS 1738-2012 Revision 4

Rivet, Blind, Protruding Head, Mechanically Locked Spindle, Bulbed

2012-02-29

AIA/NAS NAS1840-2012

INSERT ASSEMBLY, THREADED METAL, LIGHT WEIGHT SELF-LOCKING, NON SELF-LOCKING Rev 2

AIA/NAS NAS2125-2132-2012

BOLT, LOCK, TENSION, 100?CROWN HEAD, STANDARD AND OVERSIZE, PULL-TYPE, TITANIUM ALLOY Rev 1

AIA/NAS NAS3351-2012

STUD AND MANDREL TEST FIXTURE, SELF-LOCKING NUTS Rev 1

AIA/NAS NAS5171-2012

FASTENER, BLIND, INTERNALLY THREADED, EXTERNAL SLEEVE, TITANIUM, FLUSH HEAD, SELF-LOCKING, .016 OVERSIZE Rev 1

AIA/NAS NASM16536-2012

RIVET, TUBULAR, 150?FLAT COUNTERSUNK HEAD Rev 1 [Superseded: DLA MS16536 REV A CANC NOTICE 1, DLA MS16536 REV A]

AIA/NAS NASM 17829-2012 Revision 1

Nut, Self-Locking, Hexagon, Regular Height, 250 Degrees F, Non-Metallic Insert, Non-Cres Steel

2012-02-29

AIA/NAS NASM 1312-23-2012 Revision 1

Fastener Test Methods - Method 23 Tensile Strength Of Panel Fasteners

2012-02-29

AIA/NAS NASM 1312-32-2012 Revision 1

Fastener Test Method, Method 32 Barrel Nut Test

2012-02-29

AIA/NAS NASM 3926/1-2012 Revision 1

Knob, Control, Ball

2012-02-29

AIA/NAS NASM 3926/3-2012 Revision 1

Knob, Control, Tapered

2012-02-29

AIA/NAS NASM 3926/4-2012 Revision 1

Knobs, Control, Round, Edge Lighted And Non-Edge Lighted

2012-02-29

AIA/NAS NASM 7873-2012 Revision 1

Nut, Self-Locking, 1,200 Degrees F

2012-02-29

AIA/NAS NASM 8975/2-2012 Revision 1

Fasteners, Blind, High Strength, Corrosion Resistant And Heat Resistant Steel, Flush Head, Type 2, Class 1

2012-02-29

AIA/NAS NASM 8975/7-2012 Revision 1

Fasteners, Blind, High Strength, Titanium/Cres, Flush Head, Type 1, Class 2

2012-02-29

AIA/NAS NASM 14219-2013 Revision 2

Rivet, Solid, 120 Degrees Flush Interference, Tension Type Head

2013-10-31

AIA/NAS NASM 24661-2012 Revision 1

Rivet, Blind, Countersunk Head, Drive Type

2012-02-29

AIA/NAS NASM 24662-2012 Revision 2

Rivet, Blind, Universal Head, Drive Type

2012-02-29

AIA/NAS NASM 35199-2012 Revision 1

Screw, Machine, 82 Degrees Flat Countersunk Head, Cross-Recessed, Brass, Black Chemical Finish, Unf-2A

2012-02-29

AIA/NAS NASM 35203-2012 Revision 1

Screw, Machine, Flat Countersunk Head, 82 Degrees, Cruciform Recess, Aluminium Alloy, Anodic Coated, Unf-2A

2012-02-29

AIA/NAS NASM 27986-2012 Revision 1

Fasteners, Snap, Style 7, Rivet Type

2012-02-29

AIA/NAS NASM 21325-2012 Revision 1

Stud, Style 3, Snapslide Fastener

2012-02-29

AIA/NAS 5320-2012 Revision 1

Screw, Shear, 100 Degrees Flush Reduced Head, Close Tolerance, Nas 1800 Six Lobe Recess, 95 Ksi Fsu

2012-03-30

AIA/NAS 7101-2012 Revision 3

Bit, Screwdriver, Cruciform, Specification For

2012-03-30

AIA/NAS NASM 24625-2012 Revision 1

Screw, Tapping, Thread Cutting, Type Bf Or Bt, Pan Head, Cross-Recessed, Carbon Steel

2012-02-29

AIA/NAS NASM 51896-2012 Revision 2

Screw, Externally Relieved Body, Pan Head, Cruciform Recess, Cres, Unc-2A

2012-02-29

AIA/NAS NASM51956-2012

STRAP, RETAINING, ONE HOLE FOR THIN WALL CONDUIT (EMT) Rev 2 [Superseded: DLA MS51956 REV A CANC NOTICE 1, DLA MS51956 REV A, DLA MS51956]

AIA/NAS NASM 85643-2012 Revision 1

Bits, Screwdriver, Ribbed General Specification For

2012-02-29

AIA/NAS NASM 35793-2012 Revision 1

Handle, Bail, Chest, Surface Mounting, Plain Holes

2012-02-29

AIA/NAS NASM 122196-122235-2012 Revision 1

Insert, Cres, Helical Coil, Coarse Thread, 2-1/2 Dia Nominal Length

2012-02-29