行业标准数据检索

AIA/NAS NA 0079-2012 Revision 3

Nut, Self-Locking, Plate, Fixed, Two Lug, Steel, Reduced Rivet Spacing, Low Height, Cbore, 1100 Mpa, Metric, 235 Degrees C

2012-03-30

AIA/NAS NA 0096-2012 Revision 3

Nut, Self-Locking, Plate, Corner, Cres, Low Height, Cbore, 900 Mpa, Metric, 235 Degrees C And 425 Degrees C

2012-03-30

AIA/NAS NA 0127-2012 Revision 2

Screw, Captive, 100 Degrees Flush Head, Offset Cruciform Recess, Alloy Steel, 660 Mpa Shear, Metric

2012-03-30

AIA/NAS NA 0129-2012 Revision 3

Screw, Captive, 100 Degrees Flush Head, Offset Cruciform Recess, Titanium, 660 Mpa Shear, Metric

2012-03-30

AIA/NAS NA 0130-2012 Revision 2

Screw, Captive, Pan Head, Offset Cruciform Recess, Alloy Steel, 660 Mpa Shear, Metric

2012-03-30

AIA/NAS NA 0131-2012 Revision 2

Screw, Captive, Pan Head, Offset Cruciform Recess, A286 Cres, 660 Mpa Shear, Metric

2012-03-30

AIA/NAS NA 0180-0183-2012 Revision 1

Spacer, Sleeve, Screw And Bolt, Metric

2012-03-30

AIA/NAS NA 0190-0193-2012 Revision 1

Spacer, Sleeve, Rivet, Metric

2012-03-30

AIA/NAS NAM 1312-105-2012 Revision 1

Fastener Test Methods Metric Method 105 Stress Durability

2012-03-30

AIA/NAS NAM 1312-113-2012 Revision 1

Fastener Test Methods, Metric Method 113 Double Shear Test

2012-03-30

AIA/NAS 574-2014 Revision 9

Pin, Rear Mounting, Electronic Equipment

2014-10-31

AIA/NAS 576-2012 Revision 3

Thread Length For Self-Locking Nuts

2012-03-30

AIA/NAS 595-2012 Revision 6

Ring, Rigid Tube Connector, Cres

2012-03-30

AIA/NAS 1026-2012 Revision 5

Nut, Self-Locking, Plate, One Lug, Regular Height, Csk

2012-03-30

AIA/NAS 1691-2012 Revision 1

Hose Assembly, Polytetrafluoroethylene, High Temperature, High Pressure, Flareless

2012-03-30

AIA/NAS 1724-2012 Revision 3

Fastener, Shear, 100 Degrees Standard Flush Head, Tapered Shank (Ts), 95 Ksi Fsu, 108 Ksi Fsu, 110 Ksi Fsu, 125 Ksi Fsu, 132 Ksi Fsu, 156 Ksi Fsu

2012-03-30

AIA/NAS 1729-2012 Revision 3

Fastener, Shear, Protruding Head, Tapered Shank (Ts), Oversize, 95 Ksi Fsu, 108 Ksi Fsu, 110 Ksi Fsu, 125 Ksi Fsu, 132 Ksi Fsu & 156 Ksi Fsu

2012-03-30

AIA/NAS NAS1739-2012

RIVET, BLIND, 100?FLUSH HEAD, MECHANICALLY LOCKED SPINDLE, BULBED Rev 5

AIA/NAS NAS1774-2012

NUT, SELF-LOCKING, PLATE, ONE LUG, LOW HEIGHT, CBORED, FLOATING, 160 KSI, 450 癋, 800 癋 Rev 2

AIA/NAS NAS1925-2012

CLAMP, HOSE Rev 2

AIA/NAS NAS2035-2042-2012

PIN, RIVET, GROOVED, TITANIUM (COMPOSITE APPLICATIONS), 130?FLUSH HEAD, PULL-TYPE Rev 1

AIA/NAS NAS2306-2312-2012

BOLT, LOCK, TENSION, 100?HEAD (MS24694), STUMP-TYPE, TITANIUM ALLOY Rev 4

AIA/NAS NAS4120-2012

HEAT SINK, ELECTRICAL, ELECTRONIC COMPONENT, SEMICONDUCTOR DEVICES, ENCAPSULATING TYPE, TO-5 Rev 1

AIA/NAS NAS4123-2012

HEAT SINK, ELECTRICAL-ELECTRONIC COMPONENT, SEMICONDUCTOR DEVICES, FOR DUAL INLINE PACKAGES (DIP) Rev 1

AIA/NAS NAS7800-7806-2012

BOLT, PAN HEAD, CLOSE TOLERANCE, SHORT THREAD, CRUCIFORM RECESS, A286 CRES, SELF-LOCKING AND NON-LOCKING Rev 7

AIA/NAS NASM1312-10-2012

FASTENER TEST METHODS METHOD 10 STRESS RUPTURE Rev 1 [Superseded: NAVY MIL-STD-1312 -10 CANC NOTICE 1, NAVY MIL-STD-1312 -10]

AIA/NAS 176-2012

BOLT, INTERNAL WRENCHING, STEEL, 1.5000-12 Rev 10 [Refer To: AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380, AIA/NAS NAS380]

2012-03-30

AIA/NAS NAS390-2012

WASHER, FLUSH TYPE, FINISHING Rev 7

AIA/NAS NAS396-2012

NUT, U TYPE, COUNTERSUNK SHEET SPRING Rev 3

AIA/NAS NASM 18063-2012 Revision 1

Setscrew, Hexagon Socket, Cup Point, 250 Degrees F, Self Locking Element, Alloy Steel, Cadmium Plated

2012-03-30

AIA/NAS NASM 21025-2012 Revision 1

Nut, Castellated, Hexagon

2012-03-30

AIA/NAS NASM 21053-2012 Revision 2

Nut, Self-Locking, Plate, One Lug, 100 Degrees Csk, Low Height, Alloy Steel, 125 Ksi Ftu, 450 Degrees F

2012-03-30

AIA/NAS NASM 1312-28-2012 Revision 1

Fastener Test Methods Method 28 Elevated Temperature Double Shear

2012-03-30

AIA/NAS NASM 1312-30-2012 Revision 1

Fastener Test Methods Method 30 Sheet Pull-Up Of Blind Fasteners

2012-03-30

AIA/NAS NASM 3926/2-2012 Revision 1

Knob, Control, Oval Tapered

2012-03-30

AIA/NAS NASM 7874-2012 Revision 2

Bolt, Machine, 1,200 Degrees F

2012-07-31

AIA/NAS NASM 14214-2012 Revision 1

Nut Element, Attached Retention Element (A.R.E.), 450 Degrees F, Steel, Aisi 1050 Or 4130, 125 Ksi Ftu

2012-03-30

AIA/NAS NASM 21075-2012 Revision 2

Nut, Self-Locking, Plate, Two Lug, Floating, Reduced Rivet Spacing, Low Height, Steel, 125 Ksi Ftu, 450 Degrees F

2012-03-30

AIA/NAS NASM 21080-2012 Revision 1

Nut, Self-Locking, Plate, One Lug, Non-Metallic Insert, Steel, 125 Ksi Ftu, 250 Degrees F

2012-03-30

AIA/NAS NASM 21207-2015 Revision 3

Screw, Tapping, 100 Degrees Flat Head, Spaced Thread

2015-06-30

AIA/NAS NASM 51976-2012 Revision 1

Setscrew, Hexagon Socket, Half-Dog Point, Alloy Steel, Cadmium Plated, Unf-3A

2012-03-30

AIA/NAS NASM 35650-2012 Revision 1

Nut, Plain, Hexagon, Machine Screw, Unf-2B

2012-03-30

AIA/NAS NASM 91524-2012 Revision 1

Knob, Control, Short Bar, Metal And Plastic

2012-03-30

AIA/NAS NA 0039-2012 Revision 5

Screw, Close Tolerance, 100 Degrees Flush Head, Offset Cruciform Recess, Titanium Alloy, 660 Mpa, Shear, Metric

2012-04-27

AIA/NAS NA 0050-2012 Revision 2

Nut, Self-Locking, Castellated, Reduced Hexagon, 1100 Mpa Tensile, Metric, 235 Degrees C

2012-04-27

AIA/NAS NA 0081-2012 Revision 3

Nut, Self-Locking, Plate, Fixed, Corner, Steel, Reduced Rivet Spacing, Low Height, Cbore, 1100 Mpa, Metric, 235 Degrees C

2012-04-27

AIA/NAS NA 0121-0122-2012 Revision 1

Bracket, 90 Degree Angle, 2-Rivet Attach, Metric

2012-04-27

AIA/NAS NA 0128-2012 Revision 2

Screw, Captive, 100 Degrees Flush Head, Offset Cruciform Recess, A286 Cres, 660 Mpa Shear, Metric

2012-04-27

AIA/NAS NASM1312-3-2012

FASTENER TEST METHODS METHOD 3 HUMIDITY Rev 1 [Superseded: NAVY MIL-STD-1312-3 CANC NOTICE 1, NAVY MIL-STD-1312 -3]

AIA/NAS NAS123-2012

KNOB, CONTROL, 1 INCH DIA. X 5/8 OVAL, PLASTIC Rev 6