（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| AIA/NAS NA0145-2012 | INSERT, SCREW THREAD, KEY LOCKED, INSTALLATION AND REMOVAL PROCEDURE, METRIC Rev 1 | ||||
| AIA/NAS NA0153-2012 | BOLT, EYE, A286 CRES, 1100 MPa, METRIC Rev 2 | ||||
| AIA/NAS NA0008-2013 | PROCUREMENT SPECIFICATION, METRIC FASTENERS, ALLOY STEEL, EXTERNALLY THREADED, 1100 MPa TENSILE, 660 MPa SHEAR Rev 3 | ||||
| AIA/NAS NA0043-2012 | IDENTIFICATION OF MALE THREADED FASTENERS, METRIC Rev 3 | ||||
| AIA/NAS NA0045-2012 | BOLT, CLOSE TOLERANCE, HEXAGON HEAD, A286 CRES, 1100 MPa, METRIC Rev 4 | ||||
| AIA/NAS NA0252-2012 | BOLT, SHOULDER, HEXAGON HEAD, A286 CRES, 1100 MPa TENSILE, METRIC Rev 1 | ||||
| AIA/NAS NAS1030-2013 | NUT, SELF-LOCKING, PLATE, ONE LUG, REGULAR HEIGHT, NON-CSK, BEVEL SEAT Rev 5 | ||||
| AIA/NAS NAS1032-2013 | NUT, SELF-LOCKING, PLATE, ONE LUG, REGULAR HEIGHT, NON-CSK, FLOATING Rev 7 | ||||
| AIA/NAS NAS1054-2013 | RIVET, PROTRUDING HEAD Rev 5 | ||||
| AIA/NAS NAS1101-2013 | SCREW, MACHINE, FLAT FILLISTER HEAD, FULL THREAD, OFFSET CRUCIFORM Rev 12 | ||||
| AIA/NAS 1102-2013 Revision 10 | Screw, Machine, Flat 100 Degrees Head, Full Thread, Offset Cruciform | 2013-01-31 | |||
| AIA/NAS NAS1121-1128-2012 | SCREW, MACHINE, FLAT FILLISTER HEAD, CLOSE TOLERANCE, SHORT THREAD, OFFSET CRUCIFORM, 160 KSI FTU Rev 14 | ||||
| AIA/NAS NAS1223-1235-2012 | BOLT, SHEAR, HEXAGON HEAD, SELF-LOCKING Rev 5 | ||||
| AIA/NAS NAS1281-2012 | HOOK, SNAP Rev 8 | ||||
| AIA/NAS NAS1298-2012 | SCREW, BRAZIER HEAD, SHOULDER Rev 3 | ||||
| AIA/NAS NAS302-310-2013 | CABLE ASSEMBLY, SWAGED TYPE, TYPE I TERMINALS Rev 6 | ||||
| AIA/NAS NAS312-320-2013 | CABLE ASSEMBLY, SWAGED TYPE, TYPE I AND TYPE II TERMINALS Rev 6 | ||||
| AIA/NAS NAS322-330-2013 | CABLE ASSEMBLY, SWAGED TYPE, TYPE II TERMINALS REV 7 | ||||
| AIA/NAS NAS0331-2013 | BEARING INSTALLATION AND RETENTION BY SWAGING OR STAKING REV 1 | ||||
| AIA/NAS NAS354-2012 | ROD ?CONTROL, SOLID STEEL Rev 8 | ||||
| AIA/NAS NAS397-2012 | CLAMP, RATCHET, ONE PIECE Rev 4 | ||||
| AIA/NAS NAS467-2013 | BOLT, HEX HEAD, BRASS, ELECTRICAL Rev 6 | ||||
| AIA/NAS NAS523-2013 | FASTENER CODE Rev 30 | ||||
| AIA/NAS NAS578-2012 | RETAINER, FLOATING BARREL NUT Rev 9 | ||||
| AIA/NAS NAS580-2013 | INVOLUTE SPLINE, HOLE, 30 Degrees FULL FILLET Rev 2 | ||||
| AIA/NAS NAS703-2013 | WIRE, ELECTRICAL, INSULATED, COPPER, HIGH TEMPERATURE, HOOK-UP AND GENERAL PURPOSE, FOR 200 Degrees C SERVICE Rev 4 | ||||
| AIA/NAS NAS820-2012 | PLUG, PROTECTIVE, ELECTRICAL CONNECTOR Rev 3 | ||||
| AIA/NAS NAS841-2012 | CAPS, PROTECTIVE, DUST AND MOISTURE SEAL FOR BEAM SEAL FITTINGS Rev 1 | ||||
| AIA/NAS NAS842-2012 | PLUGS, PROTECTIVE, FLARELESS TUBE END (METAL) Rev 1 | ||||
| AIA/NAS NAS883-2013 | MIRROR TARGETS, OPTICAL TOOLING FRONT SURFACE AND PLANO-PARALLEL Rev 1 | ||||
| AIA/NAS NAS886-2013 | JIG TRANSIT& JIG TRANSIT SQUARES FOR OPTICAL TOOLING Rev 1 | ||||
| AIA/NAS NAS888-2013 | SIGHT LEVELS FOR OPTICAL TOOLING Rev 1 | ||||
| AIA/NAS NAS908-2013 | GLOSSARY OF OPTICAL TOOLING TERMS Rev 2 | ||||
| AIA/NAS NAS941-2013 | IDENTIFICATION MARKING OF TITANIUM SHEET Rev 2 | ||||
| AIA/NAS NAS942-2013 | STRAIN GAGES, BONDED RESISTANCE Rev 3 | ||||
| AIA/NAS NAS1727-2012 | NUT, SELF-LOCKING, ALIGNING, 450 癋 AND 800 癋 Rev 5 | ||||
| AIA/NAS NAS1740-2013 | RIVET, BLIND, SELF-PLUGGING, MECHANICALLY LOCKED SPINDLE, BULBED Rev 9 | ||||
| AIA/NAS NAS1767-2012 | BOLT, CLOSE TOLERANCE, 100?REDUCED HEAD, DOVETAIL SLOT Rev 3 | ||||
| AIA/NAS NAS1778-2012 | NUT, SELF-LOCKING, PLATE, ONE LUG, LOW HEIGHT, CBORED, SIDE BY SIDE, 160 KSI, 450 癋, 800 癋 Rev 2 | ||||
| AIA/NAS NAS7303-7316-2012 | BOLT, 100?HEAD, CRUCIFORM RECESS, CLOSE TOLERANCE, 6Al-4V TITANIUM ALLOY, LONG THREAD, SELF-LOCKING AND NONLOCKING Rev 7 | ||||
| AIA/NAS NAS7600-7616-2013 | BOLT, 100 Degrees HEAD, CRUCIFORM RECESS, CLOSE TOLERANCE, 6Al-4V TITANIUM ALLOY, SHORT THREAD, SELF-LOCKING AND NONLOCKING Rev 7 | ||||
| AIA/NAS NAS7700-7706-2012 | BOLT, PAN HEAD, CLOSE TOLERANCE, SHORT THREAD, RIBBED CRUCIFORM RECESS, ALLOY STEEL, SELF-LOCKING AND NONLOCKING Rev 5 | ||||
| AIA/NAS NAS7900-7906-2012 | BOLT, PAN HEAD, CLOSE TOLERANCE, SHORT THREAD, RIBBED CRUCIFORM RECESS, TITANIUM ALLOY 6AL-4V, SELF-LOCKING AND NONLOCKING Rev 5 | ||||
| AIA/NAS NAS8000-8006-2012 | SCREW, PAN HEAD, RIBBED CRUCIFORM RECESS, ALLOY STEEL, FULL THREAD, SELF-LOCKING AND NONLOCKING Rev 4 | ||||
| AIA/NAS NAS8200-8206-2012 | SCREW, PAN HEAD, RIBBED CRUCIFORM RECESS, TITANIUM ALLOY 6AL-4V, FULL THREAD, SELF-LOCKING AND NONLOCKING Rev 3 | ||||
| AIA/NAS NAS8802-8816-2012 | BOLT, SHEAR, 100?REDUCED HEAD, RIBBED CRUCIFORM RECESS, CLOSE TOLERANCE, 6AL-4V TITANIUM ALLOY, SHORT THREAD Rev 1 | ||||
| AIA/NAS NAS9921-2012 | BOLT, SHEAR, INTERNAL WRENCHING, SHORT THREAD, SELF-LOCKING AND NON-LOCKING, 6AL-4V TITANIUM AND A286 CRES, 160 KSI Ftu Rev 1 | ||||
| AIA/NAS NAS9924-2013 | CYBER SECURITY BASELINE | ||||
| AIA/NAS NAS1790-2012 | BOLT, 100?FLUSH HEAD, 160 KSI UTS Rev 5 | ||||
| AIA/NAS NAS1794-2012 | NUT, SELF-LOCKING, COUNTERBORE REPLACEABLE ELEMENT Rev 3 |
若您对上表中数据有任何疑问，请与网站联系。
