（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| AIA/NAS NASM35672-2012 | PIN, GROOVED, HEADLESS, LONGITUDINAL TAPER GROOVE, CORROSION-RESISTING STEEL Rev 1 [Superseded: DLA MS35672 REV B CANC NOTICE 2, DLA MS35672 REV B VALID NOTICE 1, DLA MS35672 REV B, DLA MS35672 REV A, DLA MS35672] | ||||
| AIA/NAS NASM45595-2012 | WASHERS, SHOULDERED, RECESSED, SADDLE, CONCAVE AND CONVEX, GENERAL SPECIFICATION FOR Rev 1 [Superseded: DLA MIL-W-45595 D CANC NOTICE 1, DLA MIL-W-45595 D SUPP 1, DLA MIL-W-45595 D, DLA MIL-W-45595] | ||||
| AIA/NAS NASM45595/8-2013 | WASHER, SHOULDERED, PHENOLIC Rev 1 | ||||
| AIA/NAS NASM45938/5-2013 | NUT, SELF-LOCKING, CLINCH, (SWAGE-CLINCHING, KNURLED SHANK, MINIATURE, 250 Degrees F) Rev 1 | ||||
| AIA/NAS NASM63540/4-2013 | STUD, SELF-LOCKING, CONCEALED HEAD, KNURLED CLINCH TYPE Rev 1 | ||||
| AIA/NAS NASM63540/5-2013 | STUD, SELF-LOCKING, CONCEALED HEAD, HEX CLINCH TYPE Rev 1 | ||||
| AIA/NAS NA 10009-1978 | Procurement Specification Metric Fasteners, Alloy Steel Externally Threaded 1100 Mpa Tensile 660 Mpa Shear | 1978-03-21 | |||
| AIA/NAS NA0044-2013 | NUT, SELF-LOCKING, 425 癈, METRIC, PROCUREMENT SPECIFICATION FOR Rev 3 | ||||
| AIA/NAS NA0056-2013 | RIVET, SOLID, REDUCED COUNTERSUNK 100 degrees HEAD, NICKEL-COPPER, METRIC Rev 1 | ||||
| AIA/NAS NA0057-2013 | PROCUREMENT SPECIFICATION, METRIC FASTENERS, ALLOY STEEL, EXTERNALLY THREADED, 1250 MPa TENSILE, 750 MPa SHEAR Rev 3 | ||||
| AIA/NAS NA0161-2013 | PIN, QUICK RELEASE, POSITIVE LOCKING, SINGLE ACTING, METRIC, PROCUREMENT SPECIFICATION FOR Rev 1 | ||||
| AIA/NAS NA0274-2013 | SCREW, CAP, SOCKET HEAD, FULL THREAD, 300 SERIES CRES, 500 MPa Ftu, METRIC Rev 1 | ||||
| AIA/NAS NAS901-2013 | TELESCOPES AND COLLIMATORS FOR OPTICAL TOOLING Rev 3 | ||||
| AIA/NAS NAS953-2013 | NUMERICAL CONTROL SYSTEM Rev 2 | ||||
| AIA/NAS NAS954-2013 | Numerically Controlled Horizontal Boring, Drilling and Milling Machine Rev 3 | ||||
| AIA/NAS NAS1031-2013 | NUT, SELF-LOCKING, PLATE, TWO LUG, REGULAR HEIGHT, FLOATING Rev 7 | ||||
| AIA/NAS NAS1045-2013 | THIMBLE, HEAVY, WROUGHT STEEL, WIRE CABLE, FOR GROUND SUPPORT EQUIPMENT Rev 4 | ||||
| AIA/NAS NAS1396-2013 | CHAIN, WELDED TWIST LINK, SHORT LINK PATTERN Rev 1 | ||||
| AIA/NAS NAS333-340-2013 | SCREW, SHEAR, 100?STANDARD FLUSH HEAD, CLOSE TOLERANCE, 95 KSI Fsu Rev.16 | ||||
| AIA/NAS NAS469-2013 | BEARING, BALL, SINGLE ROW, ROD END TYPE Rev 2 | ||||
| AIA/NAS NAS726-2013 | GEAR, SPUR, 20?INVOLUTE, LOW INERTIA, 48 AND FINER PITCH Rev 1 | ||||
| AIA/NAS NAS809-2013 | SPECIFICATION, AIRCRAFT SEATS AND BERTHS Rev 1 | ||||
| AIA/NAS NAS854-2013 | HAZARDOUS MATERIAL PACKAGING STANDARD PACKAGING AND SAFETY DATA SHEET NAS854 PREPARATION Rev 2 | ||||
| AIA/NAS NAS876-2013 | ALIGNMENT LASERS FOR OPTICAL TOOLING Rev 1 | ||||
| AIA/NAS NAS1686-2013 | RIVET, BLIND, ALUMINUM SLEEVE, MECHANICALLY LOCKED SPINDLE, BULBED Rev 4 | ||||
| AIA/NAS 10000-2013 | NA DOCUMENTS PREPARATION AND MAINTENANCE IN SI (METRIC) UNITS Rev 3 | 2013-02-28 | |||
| AIA/NAS NAS1771-2013 | NUT, SELF-LOCKING, PLATE, ONE LUG, LOW HEIGHT, CBORED, 160 KSI, 450 癋, 800 癋 Rev 2 | ||||
| AIA/NAS NASM14164-2013 | NUT, WHEEL, SELF-LOCKING, FLANGED, STEEL, 220 KSI Ftu, 450 degree F, SPLINE DRIVE Rev 1 [Superseded: DLA MS14164 REV A CANC NOTICE 1, DLA MS14164 REV A, DLA MS14164 VALID NOTICE 1, DLA MS14164] | ||||
| AIA/NAS NASM16208-2013 | BOLT, TENSION, HEXAGON HEAD, FINISHED, CRES, UNC-2A, NON-MAGNETIC, 75 KSI FTU Rev 3 [Superseded: DLA MS16208 REV B CANC NOTICE 1, DLA MS16208 REV B, DLA MS16208 REV A VALID NOTICE 1, DLA MS16208 REV A] | ||||
| AIA/NAS NASM16491/3-2013 | GROMMET, METALLIC, OBLONG, WITH RAISED WASHER, TYPE V REV 1 [Superseded: DLA MIL-G-16491/3 CANC NOTICE 1, DLA MIL-G-16491/3] | ||||
| AIA/NAS NASM16610-2013 | PIN, TAPERED, PLAIN Rev 1 [Superseded: DLA MIL-P-16610 B CANC NOTICE 1, DLA MIL-P-16610 B, DLA MIL-P-16610 A, DLA MIL-P-16610] | ||||
| AIA/NAS NASM21143/1-2013 | PIN, STRAIGHT, HEADLESS, DOWEL, .0002 OVERSIZE, CRES 303 Rev 1 [Superseded: ARMY MIL-P-21143/1 A CANC NOTICE 1, ARMY MIL-P-21143/1 A, ARMY MIL-P-21143/1] | ||||
| AIA/NAS NASM21245-2013 | NUT, SELF-LOCKING, HEXAGON, THIN, 450 癋, 80 KSI Ftu Rev 1 [Superseded: DLA MS21245 REV D CANC NOTICE 1, DLA MS21245 REV D, DLA MS21245 REV C, DLA MS21245 REV B] | ||||
| AIA/NAS NASM24627-2013 | SCREW, TAPPING, THREAD CUTTING, TYPES D, F, G OR T, FLAT 82 Degrees COUNTERSUNK HEAD, CRUCIFORM RECESS, CARBON STEEL Rev 1 [Superseded: DLA MS24627 REV C CANC NOTICE 3, DLA MS24627 REV C VALID NOTICE 2, DLA MS24627 REV C VALID NOTICE 1, DLA MS24627 R | ||||
| AIA/NAS NASM25049-2013 | KNOBS, CONTROL, ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR Rev 1 [Superseded: DLA MIL-K-25049 C CANC NOTICE 2, DLA MIL-K-25049 C (1), DLA MIL-K-25049 C NOTICE 1, DLA MIL-K-25049 C SUPP 1, DLA MIL-K-25049 C, DLA MIL-K-25049 B, DLA MIL-K-25049 | ||||
| AIA/NAS NASM45938/10-2013 | NUT, PLAIN, CLINCH AND NUT, SELF-LOCKING, CLINCH (SELF-CLINCHING) ROUND Rev 1 [Superseded: DLA MIL-N-45938/10 CANC NOTICE 2, DLA MIL-N-45938/10 (1), DLA MIL-N-45938/10 VALID NOTICE 1, DLA MIL-N-45938/10] | ||||
| AIA/NAS NASM45938/13-2013 | NUT, PLAIN, CLINCH AND NUT, SELF-LOCKING, CLINCH (SELF-CLINCHING, KNURLED COLLAR, MINIATURE, FLOATING, 450 癋 AND 600 癋) Rev 1 [Superseded: DLA MIL-N-45938/13 CANC NOTICE 2, DLA MIL-N-45938/13 (1), DLA MIL-N-45938/13 VALID NOTICE 1, DLA MIL-N-45938/1 | ||||
| AIA/NAS NASM27983-2013 | FASTENERS, SNAP, STYLE 4 (THREE WAY LOCKING TYPE) Rev 1 [Superseded: DLA MS27983 REV B CANC NOTICE 3, DLA MS27983 REV B VALID NOTICE 2, DLA MS27983 REV B VALID NOTICE 1, DLA MS27983 REV B, DLA MS27983 REV A, DLA MS27983] | ||||
| AIA/NAS NASM83050-2013 | BOLT, SELF-RETAINING, IMPEDANCE TYPE Rev.1 | ||||
| AIA/NAS NA0150-2013 | INSERT, SCREW THREAD, KEY LOCKED, ALLOY STEEL, HEAVY DUTY, METRIC Rev.3 | ||||
| AIA/NAS NAM1312-111-2013 | FASTENER TEST METHODS, METRIC METHOD 111 TENSION FATIGUE Rev.1 | ||||
| AIA/NAS NAS1423-2013 | NUT, PLAIN, HEXAGON, DRILLED JAM, THIN Rev.4 | ||||
| AIA/NAS NAS831-2013 | CAP, PROTECTIVE, ELECTRICAL CONNECTOR Rev.1 | ||||
| AIA/NAS NAS837-2013 | PLUG, PROTECTIVE, ELECTRICAL CONNECTOR Rev.1 | ||||
| AIA/NAS NAS8100-8106-2013 | SCREW, PAN HEAD, RIBBED CRUCIFORM RECESS, A286 CRES, FULL THREAD, SELF-LOCKING AND NONLOCKING Rev.6 | ||||
| AIA/NAS NAS5317-2013 | SCREW, PAN HEAD, FULL THREAD, SELF-LOCKING AND NON-LOCKING, NAS1800 SIX LOBE RECESS Rev.2 | ||||
| AIA/NAS NAS7004-7012-2013 | PIN, SWAGE LOCKING, A286 CRES, 100?SHEAR/TENSION HEAD, PULL-TYPE Rev.3 | ||||
| AIA/NAS NASM1312-13-2013 | FASTENER TEST METHODS METHOD 13 DOUBLE SHEAR TEST Rev.2 | ||||
| AIA/NAS NASM45915-2013 | STUD, LOCKED IN, KEY LOCKED, GENERAL SPECIFICATION FOR Rev.1 | ||||
| AIA/NAS NASM45938/3-2013 | NUT, PLAIN, CLINCH AND NUT, SELF-LOCKING, CLINCH, SELF CLINCHING, KNURLED COLLAR, 450 Fahrenheit AND 600 Fahrenheit Rev.1 |
若您对上表中数据有任何疑问，请与网站联系。
