（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN 3310-2011 | Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Not heat treated - Forging stock, for annealed forgings - De = 360 mm | ||||
| EN 2824-2011 | Aerospace series - Burning behaviour of non-metallic materials under the influence of radiating heat and flames - Determination of smoke density and gas components in the smoke of materials - Test equipment apparatus and media | ||||
| EN 6059-100-2011 | Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 100: General | ||||
| EN 1501-1-2011 | Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles | ||||
| EN 1172-2011 | Copper and copper alloys - Sheet and strip for building purposes | ||||
| EN 771-2-2011 | Specification for masonry units - Part 2: Calcium silicate masonry units | ||||
| EN 3844-1-2011 | Aerospace series - Flammability of non metallic materials - Part 1: Small burner test, vertical - Determination of the vertical flame propagation | ||||
| EN 859-2007 | Safety of woodworking machines - Hand fed surface planing machines Incorporates Amendment A1: 2009 | ||||
| EN 777-1-2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1: System D - Safety | ||||
| EN 777-2-2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2: System E - Safety | ||||
| EN 777-3-2009 | Multi-Burner Gas-Fired Overhead Radiant Tube Heater Systems for Non-Domestic Use - Part 3: System F - Safety | ||||
| EN 777-4-2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4: System H - Safety | ||||
| EN 969-2009 | Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods | ||||
| EN 1036-1-2007 | Glass in building - Mirrors from silver-coated float glass for internal use - Part 1: Definitions, requirements and test methods [Superseded: CEN EN 1036] | ||||
| EN 1094-1-2008 | Insulating refractory products - Part 1: Terminology, classification and methods of test for high temperature insulation wool products [Superseded: CEN EN 1094-3, CEN ENV 1094-7] | ||||
| EN 4165-025-2011 | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 癈 continuous - Part 025: Module receptacle - Product Norm | ||||
| EN 4612-009-2011 | Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 009: Silver plated copper - Operating temperatures, between - 65 癈 and 150 癈 - Dual extruded wall for o | ||||
| EN 4644-003-2011 | Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 癈 (or 125 癈) continuous - Part 003: Rectangular inserts - Product standard | ||||
| EN 4644-131-2011 | Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 癈 (or 125 癈) continuous - Part 131: Size 3 plug for rack and panel applications - Product standard | ||||
| EN 4644-133-2011 | Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 癈 (or 125 癈) continuous - Part 133: Size 3 receptacle for rack and panel application - Product standard | ||||
| EN 4644-141-2011 | Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 癈 (or 125 癈) continuous - Part 141: Size 4 plug for rack and panel applications - Product standard | ||||
| EN 1335-2-2009 | Office furniture - Office work chair - Part 2: Safety requirements | ||||
| CEN ISO/TS 22391-7-2011 | Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity | ||||
| CEN/TR 10353-2011 | Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry | ||||
| CEN/TR 10354-2011 | Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry | ||||
| EN 1501-5-2011 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles | ||||
| EN 1335-3-2009 | Office furniture - Office work chair - Part 3: Test methods | ||||
| EN 1366-3-2009 | Fire resistance tests for service installations - Part 3: Penetration seals | ||||
| EN 3844-2-2011 | Aerospace series - Flammability of non metallic materials - Part 2: Small burner test, horizontal - Determination of the horizontal flame propagation | ||||
| EN 3844-3-2011 | Aerospace series - Flammability of non metallic materials - Part 3: Small burner test, 45?- Determination of the resistance of material to flame and glow propagation and to flame penetration | ||||
| EN 2240-100-2011 | Aerospace series - Lamps, incandescent - Part 100: Lamp, code 2078 - Product standard | ||||
| EN 2240-101-2011 | Aerospace series - Lamps, incandescent - Part 101: Lamp, code 404-02 - Product standard | ||||
| EN 16075-2011 | Fertilizers - Determination of N-(2-nitrophenyl)phosphoric triamide (2-NPT) in urea and fertilizers containing urea - Method using high-performance liquid chromatography (HPLC) | ||||
| EN 16079-2011 | Founding - Compacted (vermicular) graphite cast irons | ||||
| EN 16086-1-2011 | Soil improvers and growing media - Determination of plant response - Part 1: Pot growth test with Chinese cabbage | ||||
| EN 16124-2011 | Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications | ||||
| EN ISO 1518-2-2011 | Paints and varnishes - Determination of scratch resistance - Part 2: Variable-loading method | ||||
| EN 15359-2011 | Solid recovered fuels - Specifications and classes [Superseded: CEN CEN/TS 15359] | ||||
| EN 15022-4-2011 | Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS) | ||||
| EN ISO 6224-2011 | Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification | ||||
| EN 16086-2-2011 | Soil improvers and growing media - Determination of plant response - Part 2: Petri dish test using cress | ||||
| EN 16087-1-2011 | Soil improvers and growing media - Determination of the aerobic biological activity - Part 1: Oxygen uptake rate (OUR) | ||||
| EN 16087-2-2011 | Soil improvers and growing media - Determination of the aerobic biological activity - Part 2: Self heating test for compost | ||||
| CEN/TS 15548-1-2011 | Thermal insulation products for building equipment and industrial installations - Determination of thermal resistance by means of the guarded hot plate method - Part 1: Measurements at elevated temperatures from 100 癈 to 850 癈 | ||||
| EN 771-1-2011 | Specification for masonry units - Part 1: Clay masonry units | ||||
| EN 10245-1-2011 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules | ||||
| EN 10245-2-2011 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire | ||||
| EN 10245-3-2011 | Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire | ||||
| EN 15150-2011 | Solid biofuels - Determination of particle density | ||||
| EN ISO 534-2011 | Paper and board - Determination of thickness, density and specific volume |
若您对上表中数据有任何疑问，请与网站联系。
