（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN 10132-1-2000 | Cold Rolled Narrow Steel Strip for Heat Treatment - Technical Delivery Conditions - Part 1: General | ||||
| EN 10132-2-2000 | Cold Rolled Narrow Steel Strip for Heat Treatment - Technical Delivery Conditions - Part 2: Case Hardening Steels | ||||
| EN 10132-3-2000 | Cold Rolled Narrow Steel Strip for Heat Treatment - Technical Delivery Conditions - Part 3: Steels for Quenching and Tempering [Replaced: GME QS 103600] | ||||
| EN 10132-4-2000 | Cold Rolled Narrow Steel Strip for Heat Treatment - Technical Delivery Conditions - Part 4: Spring Steels and Other Applications [Replaced: GME QS 1070B0] | ||||
| EN 10149-1-1995 | Hot-Rolled Flat Products Made of High Yield Strength Steels for Cold Forming Part 1: General Delivery Conditions | ||||
| EN 1015-1-1998 | Methods of Test for Mortar for Masonry - Part 1: Determination of Particle Size Distribution (by Sieve Analysis) Incorporating Amendment 1: 12/2006 | ||||
| EN 1015-10-1999 | Methods of Test for Mortar for Masonry - Part 10: Determination of Dry Bulk Density of Hardened Mortar Incorporating Amendment 1: 2006 | ||||
| EN 1015-11-1999 | Methods of Test for Mortar for Masonry - Part 11: Determination of Flexural and Compressive Strength of Hardened Mortar Incorporating Amendment 1: 2006 | ||||
| EN 1015-17-2000 | Methods of test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars Includes amendment A1:2004 | ||||
| EN 1015-19-1998 | Methods of test for mortar for masonry Part 19: Determination of water vapour permeability of hardened rendering and plastering mortars Includes amendment A1: 2004 | ||||
| EN 1015-2-1998 | Methods of Test for Mortar for Masonry - Part 2: Bulk Sampling of Mortars and Preparation of Test Mortars Incorporating Amendment 1: 12/2006 | ||||
| EN 1015-21-2002 | Methods of Test for Mortar for Masonry - Part 21: Determination of the Compatibility of One-Coat Rendering Mortars with Substrates | ||||
| EN 1015-3-1999 | Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table) Incorporating Amendment 1: 2004 and Amendment 2: 2006 | ||||
| EN 1015-6-1998 | Methods of Test for Mortar for Masonry - Part 6: Determination of Bulk Density of Fresh Mortar Incorporating Amendment 1: 2006 | ||||
| EN 1015-9-1999 | Methods of Test for Mortar for Masonry - Part 9: Determination of Workable Life and Correction Time of Fresh Mortar Incorporating Amendment 1: 2006 | ||||
| EN 10151-2002 | Stainless steel strip for springs Technical delivery conditions | ||||
| EN 10160-1999 | Ultrasonic Testing of Steel Flat Product of Thickness Equal or Greater Than 6 mm (Reflection Method) | ||||
| EN 10162-2003 | Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances | ||||
| EN 10211-1995 | Chemical Analysis of Ferrous Materials - Determination of Titanium in Steel and Iron - Flame Atomic Absorption Spectrometric Method | ||||
| EN 10216-2-2002 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties Incorporates Amendment A2: August 2007 | ||||
| EN 13951-2003 | Liquid pumps - Safety requirements - Agrifoodstuffs equipment - Design rules to ensure hygiene in use Incorporates Amendment A1: 2008 | ||||
| EN 10217-2-2002 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties Incudes amendment A1:2005 | ||||
| EN 10217-3-2002 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes Incorporates Amendment A1: 2005 | ||||
| EN 10222-2-1999 | Steel Forgings for Pressure Purposes - Part 2: Ferritic and Martensitic Steels with Specified Elevated Temperature Properties | ||||
| EN 10222-5-1999 | Steel Forgings for Pressure Purposes - Part 5: Martensitic, Austenitic and Austenitic-Ferritic Stainless Steels | ||||
| EN 13880-2-2003 | Hot applied joint sealants Part 2: Test method for the determination of cone penetration at 25 癈 | ||||
| EN 13880-4-2003 | Hot applied joint sealants - Part 4: Test method for the determination of heat resistance - Change in penetration value | ||||
| EN 13880-6-2004 | Hot applied joint sealants - Part 6: Method for the preperation of samples for testing | ||||
| EN 13880-7-2003 | Hot applied joint sealants Part 7: Function testing of joint sealants | ||||
| EN 13880-8-2003 | Hot applied joint sealants Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion | ||||
| EN 13889-2003 | Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety Incorporates Amendment A1: 2008 | ||||
| EN 1389-2003 | Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity | ||||
| EN 13892-2-2002 | Methods of test for screed materials Part 2: Determination of flexural and compressive strength | ||||
| EN 13892-5-2003 | Methods of test for screed materials Part 5: Determination of wear resistance to rolling wheel of screed material for wearing layer | ||||
| EN 13892-6-2002 | Methods of test for screed materials Part 6: Determination of surface hardness | ||||
| EN 13894-2-2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - Part 2: After hardening | ||||
| EN 13895-2003 | Textiles Monofilaments Determination of tensile properties | ||||
| EN 13898-2003 | Machine tools - Safety - Sawing machines for cold metal Incorporates Amendment A1: 2009; Incorporating Corrigendum February 2010 | ||||
| EN 13900-3-2003 | Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling | ||||
| EN 13906-1-2002 | Cylindrical Helical Springs Made from Round Wire and Bar - Calculation and Design - Part 1: Compression Springs | ||||
| EN 13911-2004 | Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters | ||||
| EN 13920-14-2003 | Aluminium and Aluminium Alloys - Scrap - Part 14: Scrap from Post-Consumer Aluminium Packagings | ||||
| EN 13920-15-2003 | Aluminium and aluminium alloys Scrap Part 15: Decoated aluminium scrap from post-consumer aluminium packagings | ||||
| EN 13920-3-2003 | Aluminium and aluminium alloys Scrap Part 3: Wire and cable scrap | ||||
| EN 13920-4-2003 | Aluminium and aluminium alloys Scrap Part 4: Scrap consisting of one single wrought alloy | ||||
| EN 13920-8-2003 | Aluminium and aluminium alloys Scrap Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes | ||||
| EN 13920-9-2003 | Aluminium and aluminium alloys Scrap Part 9: Scrap from aluminium separation processes of non-ferrous shredded materials | ||||
| EN 13925-1-2003 | Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 1: General principles | ||||
| EN 13938-3-2003 | Explosives for civil uses - Propellants and rocket propellants - Part 3: Determination of deflagration to detonation transition | ||||
| EN 13952-2003 | LPG equipment and accessories - Filling procedures for LPG cylinders Includes Amendment A1:2006 |
若您对上表中数据有任何疑问，请与网站联系。
