（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN 772-15-2000 | Methods of Test for Masonry Units - Part 15: Determination of Water Vapour Permeability of Autoclaved Aerated Concrete Masonry Units | ||||
| EN 772-19-2000 | Methods of Test for Masonry Units - Part 19: Determination of Moisture Expansion of Large Horizontally Perforated Clay Masonry Units | ||||
| EN 772-2-1998 | Methods of test for masonry units ?Part 2: Determination of percentage area of voids in masonry units (by paper indentation) Incorporates Amendment A1: 2005 | ||||
| EN ISO 9054-1999 | Cellular Plastics, Rigid - Test Methods for Self-Skinned, High-Density Materials | ||||
| EN ISO 9073-6-2003 | Textiles - Test methods for nonwovens - Part 6: Absorption ISO 9073-6:2000 | ||||
| EN ISO 9073-7-1998 | Textiles - Test Methods for Nonwovens - Part 7: Determination of Bending Length ISO 9073-7:1995 | ||||
| EN ISO 9093-2-2002 | Small craft - Seacocks and through-hull fittings - Part 2: Nonmetallic ISO 9093-2: 2002 | ||||
| EN ISO 9094-1-2003 | Small craft Fire protection Part 1: Craft with a hull length of up to and including 15 m ISO 9094-1: 2003 | ||||
| EN 504-1999 | Roofing Products from Metal Sheets - Specification for Fully Supported Roofing Products of Copper Sheet | ||||
| EN 507-1999 | Roofing Products from Metal Sheets - Specification for Fully Supported Roofing Products of Aluminium Sheet | ||||
| EN ISO 9220-1994 | Metallic Coatings - Measurement of Coating Thickness - Scanning Electron Microscope Method (ISO 9220 : 1988) | ||||
| EN ISO 9241-14-1999 | Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 14: Menu Dialogues | ||||
| EN ISO 9241-5-1999 | Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 5: Workstation Layout and Postural Requirements ISO 9241-5:1998 | ||||
| EN ISO 9289-1995 | Oilseed Residues - Determination of Free Residual Hexane (ISO 9289 : 1991) | ||||
| EN ISO 9396-2000 | Plastics - Phenolic Resins - Determination of the Gel Time at a Given Temperature Using Automatic Apparatus ISO 9396: 1997 | ||||
| EN ISO 9408-1999 | Water Quality - Evaluation of Ultimate Aerobic Biodegradability of Organic Compounds in Aqueous Medium by Determination of Oxygen Demand in a Closed Respirometer [Superseded: CEN EN 29408] | ||||
| EN ISO 9439-2000 | Water Quality - Evaluation of Ultimate Aerobic Biodegradability of Organic Compounds in Aqueous Medium - Carbon Dioxide Evolution Test ISO 9439: 1999 | ||||
| EN ISO 9454-2-2001 | Soft Soldering Fluxes - Classification and Requirements - Part 2: Performance Requirements ISO 9454-2:1998 | ||||
| EN ISO 9455-13-1999 | Soft Soldering Fluxes - Test Methods - Part 13: Determination of Flux Spattering | ||||
| EN ISO 9455-2-1995 | Soft Soldering Fluxes - Test Methods - Part 2: Determination of Non-Volatile Matter, Ebulliometric Method (ISO 9455-2 : 1993) | ||||
| EN ISO 9455-6-1997 | Soft Soldering Fluxes - Test Methods - Part 6: Determination and Detection of Halide (Excluding Fluoride) Content ISO 9455-6: 1995 | ||||
| EN ISO 9455-9-1995 | Soft Soldering Fluxes - Test Methods - Part 9: Determination of Ammonia Content (ISO 9455-9 : 1993) | ||||
| EN ISO 9488-1999 | Solarenergie - Vokabular Solar Energy - Vocabulary Energie Solaire - Vocabulaire ISO 9488:1999 | ||||
| EN ISO 9606-4-1999 | Approval Testing of Welders - Fusion Welding - Part 4: Nickel and Nickel Alloys ISO 6906-4:1999 | ||||
| EN ISO 9606-5-2000 | Approval Testing of Welders - Fusion Welding - Part 5: Titanium and Titanium Alloys, Zirconium and Zirconium Alloys ISO 9606-5: 2000 | ||||
| EN ISO 9664-1995 | Adhesives - Test Methods for Fatigue Properties of Structural Adhesives in Tensile Shear (ISO 9664: 1993) | ||||
| EN ISO 9665-2000 | Adhesives - Animal Glues - Methods of Sampling and Testing ISO 9665: 1998: (W) | ||||
| EN ISO 9693-2000 | Metal-Ceramic Dental Restorative Systems ISO 9693: 1999 | ||||
| EN ISO 9706-1998 | Information and Documentation - Paper for Documents - Requirements for Permanence | ||||
| EN ISO 9707-1995 | Information and Documentation - Statistics on the Production and Distribution of Books, Newspapers, Periodicals and Electronic Publications (ISO 9707: 1991) | ||||
| EN ISO 9771-1997 | Plastics - Phenolic Resins - Determination of the Pseudo-Adiabatic Temperature Rise of Liquid Resols When Cured Under Acid Conditions ISO 9771:1995 | ||||
| EN ISP 10607-4-1996 | Information Technology - International Standardized Profiles AFTnn - File Transfer, Access and Management - Part 4: AFT12 - Postional File Transfer Service (Flat) Regional Variant of ISO/IEC ISP 10607-4: 1995 | ||||
| EN ISP 10607-5-1996 | Information Technology - International Standardized Profiles AFTnn - File Transfer, Access and Management - Part 5: AFT22 - Postional File Access Service (Flat) Regional Variant of ISO/IEC ISP 10607-5: 1995 | ||||
| EN ISP 10609-10-1996 | Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 10: LAN Subnetwork-Dependent, Media-Independent Requirements Supersedes ENV 41103-1: 1992; ISO/ | ||||
| EN ISP 10609-2-1996 | Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 2: Subnetwork-Type Independent Requirements for Group TC Supersedes ENV 41104: 1987; ISO/IEC IS | ||||
| EN ISP 10613-8-1996 | Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 8: Definition of Profile RA51.1111, Relaying the Connectionless-Mode Network Service between CSMA/CD LAN Subnetworks and PSDNs Using | ||||
| EN 10228-2-1998 | Non-Destructive Testing of Steel Forgings - Part 2: Penetrant Testing | ||||
| EN 10228-3-1998 | Non-Destructive Testing of Steel Forgings - Part 3: Ultrasonic Testing of Ferritic or Martensitic Steel Forgings | ||||
| EN 1023-1-1996 | Office Furniture - Screens Part 1: Dimensions | ||||
| EN 1023-3-2000 | Office Furniture - Screens - Part 3: Test Methods | ||||
| EN 10230-1-1999 | Steel Wire Nails Part 1: Loose Nails for General Applications | ||||
| EN 10240-1997 | Internal and/or External Protective Coatings for Steel Tubes - Specification for Hot Dip Galvanized Coatings Applied in Automatic Plants | ||||
| EN 10241-2000 | Steel Threaded Pipe Fittings | ||||
| EN 10243-2-1999 | Steel Die Forgings - Tolerances on Dimensions - Part 2: Upset Forgings Made on Horizontal Forging Machines Incorporating Corrigendum March 2005 | ||||
| EN 10244-3-2001 | Steel Wire and Wire Products - Non-Ferrous Metallic Coatings on Steel Wire - Part 3: Aluminium Coatings | ||||
| EN 10244-5-2001 | Steel Wire and Wire Products - Non-Ferrous Metallic Coatings on Steel Wire - Part 5: Nickel Coatings | ||||
| EN 10244-6-2001 | Steel Wire and Wire Products - Non-Ferrous Metallic Coatings on Steel Wire - Part 6: Copper, Bronze or Brass Coatings | ||||
| EN 10246-16-2000 | Non-Destructive Testing of Steel Tubes - Part 16: Automatic Ultrasonic Testing of Area Adjacent to the Weld Seam of Welded Steel Tubes for the Detection of Laminar Imperfections | ||||
| EN 10248-2-1995 | Hot Rolled Sheet Piling of Non Alloy Steels - Part 2: Tolerances on Shape and Dimensions | ||||
| EN 10249-1-1995 | Cold Formed Sheet Piling of Non Alloy Steels - Part 1: Technical Delivery Conditions |
若您对上表中数据有任何疑问，请与网站联系。
