（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN ISO 13787-2003 | Thermal insulation products for building equipment and industrial installations Determination of declared thermal conductivity ISO 13787:2003 | ||||
| EN ISO 13793-2001 | Thermal Performance of Buildings - Thermal Design of Foundations to Avoid Frost Heave ISO 13793:2001 | ||||
| EN ISO 13844-2000 | Plastics Piping Systems - Elastomeric-Sealing-Ring-Type Socket Joints of Unplasticized Poly (Vinyl Chloride)(PVC-U) for Use with PVC-U Pipes - Test Method for Leaktightness under Negative Pressure ISO 13844:2000 | ||||
| EN ISO 13845-2000 | Plastics Piping Systems - Elastomeric-Sealing-Ring-Type Socket Joints for Use with Unplasticized Poly (Vinyl Chloride)(PVC-U) Pipes - Test Method for Leaktightness under Internal Pressure and with Angular Deflection ISO 13845:2000 | ||||
| EN ISO 13846-2000 | Plastics Piping Systems - End-Load-Bearing and Non-End-Load-Bearing Assemblies and Joints for Thermoplastic Pressure Piping - Test Method for Long-Term Leaktightness Under Internal Pressure ISO 13846:2000 | ||||
| EN ISO 13900-2002 | Steel - Determination of Boron Content - Curcumin Spectrophotometric Method After Distillation ISO 13900: 1997 | ||||
| EN ISO 13920-1996 | Welding - General Tolerances for Welded Constructions - Dimensions for Lengths and Angles - Shape and Position | ||||
| EN ISO 13935-1-1999 | Textiles - Seam Tensile Properties of Fabrics and Made-Up Textile Articles - Part 1: Determination of Maximum Force to Seam Rupture Using the Strip Method ISO 13935-1:1999 | ||||
| EN ISO 13935-2-1999 | Textiles - Seam Tensile Properties of Fabrics and Made-Up Textile Articles - Part 2: Determination of Maximum Force to Seam Rupture Using the Grab Method ISO 13935-2:1999 | ||||
| EN ISO 13937-2-2000 | Textiles - Tear Properties of Fabrics - Part 2: Determination of Tear Force of Trouser-Shaped Test Specimens (Single Tear Method) ISO 13937-2:2000 | ||||
| EN ISO 13937-4-2000 | Textiles - Tear Properties of Fabrics - Part 4: Determination of Tear Force of Tongue-Shaped Test Specimens (Double Tear Method) ISO 13937-4: 2000 | ||||
| EN ISO 13938-1-1999 | Textiles - Bursting Properties of Fabrics - Part 1: Hydraulic Method for Determination of Bursting Strength and Bursting Distension ISO 13938-1:1999 | ||||
| EN ISO 13938-2-1999 | Textiles - Bursting Properties of Fabrics - Part 2: Pneumatic Method for Determination of Bursting Strength and Bursting Distension ISO 13938-2:1999 | ||||
| EN ISO 13995-2000 | Protective Clothing - Mechanical Properties - Test Method for the Determination of the Resistance to Puncture and Dynamic Tearing of Materials ISO 13995:2000 | ||||
| EN ISO 13997-1999 | Protective Clothing - Mechanical Properties - Determination of Resistance to Cutting by Sharp Objects ISO 13997:1999 | ||||
| EN ISO 140-5-1998 | Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 5: Field Measurements of Airborne Sound Insulation of Facade Elements and Facades ISO 140-5:1998 | 1998-08-01 | |||
| EN ISO 140-7-1998 | Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 7: Field Measurements of Impact Sound Insulation of Floors ISO 140-7:1998 | ||||
| EN ISO 14024-2000 | Environmental Labels and Declarations - Type I Environmental Labelling - Principles and Procedures | ||||
| EN ISO 14031-1999 | Environmental Management - Environmental Performance Evaluation - Guidelines ISO 14031:1999 | ||||
| EN ISO 14122-1-2001 | Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels Incorporates Amendment A1: 2010 | ||||
| EN ISO 14122-2-2001 | Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways Incorporates Amendment A1: 2010 | ||||
| EN ISO 14122-3-2001 | Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails Incorporates Amendment A1: 2010 | ||||
| EN ISO 14129-1997 | Fibre-Reinforced Plastic Composites - Determination of the in-Plane Shear Stress/Shear Strain Response, Including the in-Plane Shear Modulus and Strength, by the Plus or Minus 45 Degree Tension Test Method ISO 14129:1997 | ||||
| EN ISO 14130-1997 | Fibre-reinforced plastic composites Determination of apparent interlaminar shear strength by short-beam method ISO 14130:1997 | ||||
| EN ISO 14182-1999 | Animal Feeding Stuffs - Determination of Residues of Organophosphorus Pesticides - Gas Chromatographic Method ISO 14182:1999 | ||||
| EN ISO 1421-1998 | Rubber- or Plastics-Coated Fabrics - Determination of Tensile Strength and Elongation at Break ISO 1421:1998 | ||||
| EN ISO 14233-2003 | Dentistry Polymer-based die materials ISO 14233:2003 | ||||
| EN ISO 14246-2001 | Transportable Gas Cylinders - Gas Cylinder Valves - Manufacturing Tests and Inspections ISO 14246: 2001 | ||||
| EN ISO 14253-1-1998 | Geometrical Product Specifications (GPS) - Inspection by Measurement of Workpieces and Measuring Equipment - Part 1: Decision Rules for Proving Conformance or Non-Conformance with Specifications ISO 14253-1:1998 | ||||
| EN ISO 14324-2003 | Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints ISO 14324:2003 | ||||
| EN ISO 14329-2003 | Resistance welding Destructive tests of welds Failure types and geometric measurements for resistance spot, seam and projection welds ISO 14329:2003 | ||||
| EN ISO 14356-2003 | Dentistry Duplicating material ISO 14356:2003 | ||||
| EN ISO 14402-1999 | Water Quality - Determination of Phenol Index by Flow Analysis (FIA and CFA) ISO 14402:1999 | ||||
| EN 374-2-2003 | Protective Gloves Against Chemicals and Micro- Organisms - Part 2 : Determination of Resistance to Penetration | ||||
| EN 3740-1996 | Aerospace Series - Bolts, Shouldered, Thin Hexagonal Head, Close Tolerance Shank, Short Thread, in Titanium Alloy, Anodized, MoS2 Lubricated - Classification: 1 100 MPa (at Ambient Temperature)/315 Degrees C | ||||
| EN 3745-305-2002 | Aerospace Series - Fibres and Cables, Optical, Aircraft Use - Test Methods - Part 305: Immunity to Ambient Light Coupling | ||||
| EN 3745-508-2002 | Aerospace Series - Fibres and Cables, Optical, Aircraft Use - Test Methods - Part 508: Torsion | ||||
| EN 3745-509-2002 | Aerospace Series - Fibres and Cables, Optical, Aircraft Use - Test Methods - Part 509: Kink Test | ||||
| EN 3745-701-2002 | Aerospace Series - Fibres and Cables, Optical, Aircraft Use - Test Methods - Part 701: Strippability | ||||
| EN 3760-1996 | Aerospace Series - Screws, 100 Degree Countersunk Normal Head, Offset Cruciform Recess, Threaded to Head, in Heat and Corrosion Resisting Steel, Passivated - Classification: 1 100 MPa (at Ambient Temperature)/425 Degrees C | ||||
| EN 3769-1997 | Aerospace Series - Electrolytic Polishing of Corrosion Resisting Steels and Heat Resisting Alloys | ||||
| EN 3773-001-1999 | Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 In/1 000 A max. Part 001: Technical specification | ||||
| EN 3789-2001 | Aerospace Series - Pipe Coupling 8 Degrees 30?- Protective Plugs with External Threads | ||||
| EN 379-2003 | Personal eye-protection - Automatic welding filters Incorporates Amendment A1: 2009 | ||||
| EN 3790-2001 | Aerospace series - Pipe coupling 8°30' - Protective caps with internal threads | ||||
| EN 380-1993 | Timber Structures - Test Methods - General Principles for Static Load Testing | ||||
| EN 381-1-1993 | Protective Clothing for Users of Hand-Held Chain Saws - Part 1: Test Rig for Testing Resistance to Cutting by a Chain Saw AS/NZS 4453.1: 1997 | ||||
| EN 381-11-2002 | Protective clothing for users of hand-held chainsaws - Part 11: Requirements for upper body protectors | ||||
| EN 381-2-1995 | Protective Clothing for Users of Hand-Held Chain Saws Part 2: Test Methods for Leg Protectors AS/NZS 4453.2: 1997 | ||||
| EN 381-3-1996 | Protective Clothing for Users of Hand-Held Chain Saws - Part 3: Test Methods for Footwear |
若您对上表中数据有任何疑问，请与网站联系。
