（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN 13984-2004/A1-2006 | Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics | 2006-11-29 | |||
| AIA/NAS NASM 47196-2012 Revision 1 | Preparation For And Installation Of Buck-Type Rivets | 2012-05-31 | |||
| AIA/NAS NASM 47196-1999 | Rivet, Buck Type, Preparation For And Installation Of | 1999-02-01 | |||
| EN 14678-1-2006+A1-2009 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers | 2009-04-22 | |||
| EN ISO 15753:2006/A1:2011 | Animal and vegetable fats and oils - Determination of polycyclic aromatic hydrocarbons - Amendment 1: Exclusion of olive pomace oil from the scope (ISO 15753:2006/Amd 1:2011) | 2011-08-01 | |||
| AIA/NAS NASM 51939-2001 | Loop, Strap Fastener (footman's Loop) | 2001-08-01 | |||
| EN ISO 4492-1993 | Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering (ISO 4492:1985) | 1993-04-07 | |||
| EN ISO 15791-1:2013 | Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014) | 2013-12-18 | |||
| AIA/NAS NASM 51966-1998 | Setscrew - Hexagon Socket, Flat Point, Alloy Steel, Cadmium Plated, Unf-3a, Plain And Self-locking | 1998-12-01 | |||
| EN 1597-2:1997 | Welding consumables - Test methods - Part 2: Preparation of test piece for single-run and two-run technique test specimens in steel | 1997-07-23 | 2008-05-07 | ||
| 黑龙江省电信设施建设与保护条例 | 2015-08-21 | 2015-10-01 | |||
| AIA/NAS NASM 85643/5-1998 | Bit, Screwdriver, Insert Type, Ribbed, Offset Cruciform, External Hexagon Shank, Manually Driven | 1998-06-30 | |||
| EN ISO 1043-2:2001 | Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2000) | 2001-08-22 | |||
| AIA/NAS NASM 91522-2003 Revision 1 | Knob, Control, Crank, Metal | 2003-12-01 | |||
| EN ISO 15876-2:2003/A1:2007 | Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes - Amendment 1 (ISO 15876-2:2003/Amd 1:2007) | 2007-06-15 | |||
| AIA/NAS NASM 91528-2001 | Knobs-control, Plastic (round, Concentric, Pointer, Spinner, Spinner Slip-clutch, Bar, Tactile, Knob Lock Pointer, Slip-clutch, And Knob Locks) | 2001-12-01 | |||
| EN 1458-1:1999 | Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1: Safety | 1999-10-20 | |||
| 黑龙江省实施《中华人民共和国归侨侨眷权益保护法》办法 | 1992-02-28 | 1992-02-28 | 1994-05-21 | ||
| AIA/NAS NA 0036-1997 Revision 4 | Bolt, Close Tolerance, Hexagon Head Alloy Steel 1100 Mpa Metric | 1997-02-24 | |||
| EN 13244-5:2002 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 5: Fitness for purpose of the system | 2002-12-11 | |||
| EN ISO 3450:2008 | Earth-moving machinery - Braking systems of rubber-tyred machines - Systems and performance requirements and test procedures (ISO 3450:1996) | 2008-08-13 | |||
| EN ISO 105-E02-1996 | Textiles - Tests for colour fastness - Part E02: Colour fastness to sea water (ISO 105-E02:1994) | 1996-06-26 | |||
| EN ISO 3450:1996 | Earth-moving machinery - Braking systems of rubber-tyred machines - Systems and performance requirements and test procedures (ISO 3450:1996) | 1996-04-01 | |||
| AIA/NAS NA 0049-1990 Revision 1 | Nut, Self-locking, Castellated, Reduced Hexagon, 660 Mpa Shear, Metric, 235 Degrees C | 1990-06-15 | |||
| EN 1333:1996 | Pipework components - Definition and selection of PN | 1996-08-21 | 2006-03-08 | ||
| EN 1337-2:2000 | Structural bearings - Part 2: Sliding elements | 2000-12-13 | 2004-03-17 | ||
| EN ISO 28017:2011/A1:2015 | Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification - Amendment 1 (ISO 28017:2011/Amd 1:2015) | 2015-02-18 | |||
| EN 1337-4:2004/AC:2007 | Structural bearings - Part 4: Roller bearings | 2007-02-14 | |||
| 黑龙江省实施《中华人民共和国归侨侨眷权益保护法》办法(1994年修改版) | 1994-05-21 | 1994-05-21 | 2005-06-24 | ||
| AIA/NAS NASM 256-2004 Revision 2 | Nut - Self Locking, Plate, Right Angle, 250 Degree F | 2004-07-01 | |||
| EN 1346:1996 | Adhesives for tiles - Determination of open time | 1996-12-11 | 2007-08-29 | ||
| CEN/TS 15958:2009 | Fertilizers - Extraction of water soluble phosphorus | 2009-12-23 | |||
| EN 1346:1996/A1:1998 | Adhesives for tiles - Determination of open time | 1998-09-23 | |||
| AIA/NAS NASM 310-1998 | Nut, Plain, Castellated, Airframe | 1998-10-01 | |||
| EN 1348:1997 | Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives | 1997-02-19 | 2007-08-29 | ||
| 黑龙江省实施《中华人民共和国归侨侨眷权益保护法》办法(2015年修改版) | 2015-06-19 | 2015-06-19 | |||
| EN 1348:1997/A1:1998 | Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives | 1998-09-23 | |||
| EN 1354:1996 | Determination of compressive strength of lightweight aggregate concrete with open structure | 1996-12-11 | 2005-07-06 | ||
| EN 12680-3:2003 | Founding - Ultrasonic examination - Part 3: Spheroidal graphite cast iron castings | 2003-01-22 | |||
| EN 1364-4:2014 | Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration | 2014-02-05 | |||
| EN 1366-4:2006+A1:2010 | Fire resistance tests for service installations - Part 4: Linear joint seals | 2010-04-14 | |||
| SAE AMS 4898D-2014 | Titanium Alloy, Sheet, 6Al - 2Sn - 2Zr - 2Mo - 2Cr - 0.15Si, Annealed | 2014-01-16 | |||
| AIA/NAS NASM 760-2002 | Strap, Retaining, (metal For Conduit, Pipe, And Cable) | 2002-03-01 | |||
| SAE AMS 4898B-2007 | Titanium Alloy, Sheet, 6Al - 2Sn - 2Zr - 2Mo - 2Cr - 0.15Si, Annealed | 2007-05-15 | |||
| SAE AMS 4898A-2001 | Titanium Alloy, Sheet 6al 2sn 2zr 2mo 2cr 0.15si Annealed | 2001-11-20 | |||
| SAE AMS 4898-1996 | Titanium Alloy, Sheet 6Al - 2Sn - 2Zr- 2Mo - 2Cr - 0.15SI Annealed | 1996-09-01 | |||
| SAE AS 9025A-2007 | Clamp - Loop Type Support (Heat Resistant) .265 Hole | 2007-07-05 | |||
| SAE AS 9025-2004 | Clamp - Loop Type Support (Heat Resistant) .265 Hole | 2004-07-27 | |||
| SAE AS 90376A1-2004 | Cap, Dust, Plastic, Electric Connector | 2004-12-09 | |||
| EN 1367-1:1999 | Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing | 1999-11-17 | 2007-03-21 |
若您对上表中数据有任何疑问，请与网站联系。
