（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| EN 1198:1997 | Chemicals used for treatment of water intended for human consumption - Sodium dihydrogen orthophosphate | 1997-09-24 | 2005-03-16 | ||
| EN ISO 8580:1995 | Rubber and plastics hoses - Determination of ultra-violet resistance under static conditions (ISO 8580:1987) | 1995-02-20 | |||
| 黑龙江省水利工程管理条例(2015年修改) | 2015-04-17 | 2015-04-17 | |||
| SAE AMS 2262F-1994 | Tolerances, Nickel, Nickel Alloy, and Cobalt Alloy Sheet, Strip and Plate | 1994-04-01 | |||
| SAE AMS 2262E-1989 | Tolerances, Nickel, Nickel Alloy, and Cobalt Alloy Sheet, Strip and Plate | 1989-01-01 | |||
| EN ISO 11758:1997 | Rubber and plastics hoses - Exposure to a xenon arc lamp - Determination of changes in colour and appearance (ISO 11758:1995) | 1997-05-21 | |||
| EN 1200:1997 | Chemicals used for treatment of water intended for human consumption - Trisodium orthophosphate | 1997-09-24 | 2005-03-16 | ||
| SAE AMS 2262D-1981 | Tolerances, Nickel, Nickel Alloy, and Cobalt Alloy Sheet, Strip and Plate | 1981-10-01 | |||
| CEN/TS 13476-4-2008 | Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 4: Guidance for the assessment of conformity | 2008-07-16 | |||
| EN ISO 11758:1997/AC:1998 | Rubber and plastic hoses - Exposure to a xenon arc lamp - Determination of changes in colour and appearance (ISO 11758:1995) | 1998-09-03 | |||
| SAE AMS 2262C-1962 | Tolerances, Nickel, Nickel Alloy, and Cobalt Alloy Sheet, Strip and Plate | 1962-01-01 | |||
| SAE AMS 2262B-1957 | Tolerances, Nickel, Nickel Alloy, and Cobalt Alloy Sheet, Strip and Plate | 1957-07-01 | |||
| SAE AMS 2262A-1950 | Tolerances, Nickel, Nickel Alloy, and Cobalt Alloy Sheet, Strip and Plate | 1950-06-01 | |||
| SAE AMS 2262-1948 | Tolerances, Nickel, Nickel Alloy, and Cobalt Alloy Sheet, Strip and Plate | 1948-05-01 | |||
| CEN/TS 15960:2009 | Fertilizers - Extraction of total calcium, total magnesium, total sodium and total sulfur in the forms of sulfates | 2009-12-23 | |||
| CEN/TS 14541-2007 | Plastics pipes and fittings - Characteristics for utilisation of nonvirgin PVC-U, PP and PE materials | 2007-02-07 | |||
| CEN ISO/TR 15608-2005 | Welding - Guidelines for a metallic materials grouping system | 2005-10-15 | |||
| CR ISO 15608-2000 | Welding - Guidelines for a metallic materials grouping system | 2000-04-01 | |||
| 关于废止和修改《黑龙江省文化市场管理条例》等五十部地方性法规的决定 | 2015-04-17 | 2015-04-17 | |||
| EN ISO 22435:2007/A1:2012 | Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2007/Amd 1:2012) | 2012-12-01 | |||
| EN 12442-2:2000 | Animal tissues and their derivatives utilized in the manufacture of medical devices - Part 2: Controls on sourcing, collection and handling | 2000-09-20 | 2007-12-15 | ||
| EN 12952-5:2001 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler | 2001-12-12 | |||
| EN ISO 22476-3:2005+A1:2011 | Geotechnical investigation and testing — Field testing —Part3:Standard penetration test | ||||
| AIA/NAS NASM 1312-1997 | Fastener Test Methods | 1997-08-01 | |||
| EN 13037:1999 | Soil improvers and growing media - Determination of pH | 1999-12-08 | |||
| AIA/NAS 128-1978（R1992） Revision 2 | Filler - Knob Lever Slot | 1978-02-25 | |||
| 黑龙江省文化市场管理条例1991年版 | 1991-10-30 | 1991-10-30 | 1994-07-25 | ||
| EN 3270:2001/AC:2003 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Blanking plugs with lockring | 2003-07-23 | |||
| EN 1371-1:1997 | Founding - Liquid penetrant inspection - Part 1: Sand, gravity die and low pressure die castings | 1997-06-18 | |||
| SAE AMS 2268-1980 | Chemical Check Analysis Limits Cast Nickel And Nickel Alloys | 1980-04-01 | |||
| SAE AMS 2268A-2002 | Chemical Check Analysis Limits Cast Nickel And Nickel Alloys | 2002-07-23 | |||
| EN 1564:2011 | Founding - Ausferritic spheroidal graphite cast irons | 2011-11-02 | |||
| EN 1564:1997 | Founding - Austempered ductile cast irons | 1997-06-18 | |||
| 黑龙江省文化市场管理条例(1994年修正版) | 1994-07-25 | 1994-07-25 | 1996-02-09 | ||
| EN 1564:1997/A1:2006 | Founding - Austempered ductile cast irons | 2006-01-11 | |||
| CEN ISO/TS 25110-2008 | Electronic fee collection - Interface definition for on-board account using integrated circuit card (ICC) | 2008-11-15 | |||
| AIA/NAS 384-1964（R1992 ）Revision 1 | Screw-100 Degrees Oval Recessed Head Sheet Metal | 1964-01-15 | |||
| SAE MA 2028A-1991 | Fitting, Cross, Thin Wall, Flareless, Metric | 1991-10-30 | |||
| SAE MA 2028-1985 | Fitting, Cross, Thin Wall, Flareless, Metric | 1985-08-01 | |||
| SAE AS 9531B-2015 | BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .3125-24 UNJF-3A | 2015-08-14 | |||
| AIA/NAS 540-1988 Revision 3 | Involute Splines 45 Degree Pressure Angle, Loose Fit | 1988-07-08 | |||
| SAE AS 9531-2006 | Bolt, Machine - Steel AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .3125-24 UNJF-3A | 2006-05-10 | |||
| EN 14511-1:2007 | Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 1: Terms and definitions | 2007-11-28 | |||
| SAE J 1332-1981 | Rope Drum Rotation Indicating Device | 1981-10-01 | |||
| AIA/NAS 579-1954（R1983）Revision 1 | Involute Spline 30 Degree Full Fillet | 1954-08-13 | |||
| SAE J 2473-2014 | Self-Propelled Sweepers and Scrubbers - Maximum Gradient Rating During Hopper Discharge | 2014-04-28 | |||
| SAE J 2473-2001 | Self-Propelled Sweepers and Scrubbers--Maximum Gradient Rating During Hopper Discharge | 2001-08-15 | |||
| AIA/NAS 597-1986 Revision 3 | Fittings - Rigid Tube Connector Flared Tube | 1986-02-14 | |||
| SAE J 1887-2002 | Automotive Compacted Graphite Iron Castings | 2002-07-08 | |||
| SAE ARP 506-1959 | High Temperature Insulated Terminal Legs | 1959-11-15 |
若您对上表中数据有任何疑问，请与网站联系。
