（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| AMS4131B | Aluminum Alloy, Die and Hand Forgings 5.6zn 2.5mg 1.6cu 0.23cr (7075-T-74), Solution and Precipitation Heat Treated and Aged | ||||
| AMS4131C | Aluminum Alloy, Die and Hand Forgings 5.6zn 2.5mg 1.6cu 0.23cr, Solution and Precipitation Heat Treated and Aged | ||||
| AMS4130F | Aluminum Alloy Die Forgings, 4.4Cu - 0.85Si - 0.80Mn (2025-T6), Solution and Precipitation Heat Treated | ||||
| AMS4166C | Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution Heat Treated and Overaged | ||||
| AMS4166F | Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution Heat Treated and Overaged | ||||
| AMS4635 | Aluminum Bronze Bars, Rods, and Forgings, 87Cu - 9Al - 3Fe, Stress Relieved | ||||
| AMS4166E | Aluminum Alloy, Extrusions 5.6zn 2.5mg 1.6cu 0.23cr Solution Heat Treated and Overaged | ||||
| AMS4635A | Aluminum Bronze Bars, Rods, and Forgings, 87Cu - 9Al - 3Fe, Stress Relieved | ||||
| AMS4635C | Aluminum Bronze Bars, Rods, and Forgings, 87Cu - 9Al - 3Fe, Stress Relieved | ||||
| AMS4635B | Aluminum Bronze Bars, Rods, and Forgings, 87Cu - 9Al - 3Fe, Stress Relieved | ||||
| AMS4597 | Copper-Nickel-Tin Alloy, Bars and Rods, 77Cu - 15Ni - 8Sn, Solution Annealed, Cold Finished and Spinodal Hardened (TX TS) | ||||
| AMS4597A | Copper-Nickel-Tin Alloy, Bars and Rods, 77Cu - 15Ni - 8Sn, Solution Annealed, Cold Finished and Spinodal Hardened (TX TS) | ||||
| AMS4778 | Nickel Alloy, Brazing Filler Metal, 92Ni - 4.5Si - 3.1B, 1800 to 1900 脗掳F Solidus-Liquidus Range | ||||
| AMS4533D | Copper-Beryllium Alloy, Bars and Rods, 98Cu - 1.9Be, Solution and Precipitation Heat Treated (TF00, formerly AT) | ||||
| AMS4635G | Aluminum Bronze Bars, Rods, and Forgings 87Cu - 9Al - 3Fe, Stress Relieved | ||||
| AMS5518G | Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni Cold Rolled, 150 Ksi (1034 MPa) Tensile Strength | ||||
| AMS5518E | Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni Cold Rolled, 150 Ksi (1034 MPa) Tensile Strength | ||||
| AMS5518H | Steel, Corrosion Resistant, Sheet and Strip, 18Cr - 8Ni (SAE 30301) Cold Rolled, 150 ksi (1034 MPa) Tensile Strength | ||||
| AMS5518 | Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni Cold Rolled, 150 Ksi (1034 MPa) Tensile Strength | ||||
| AMS4131A | Aluminum Alloy, Die and Hand Forgings 5.6zn 2.5mg 1.6cu 0.23cr (7075-T-74), Solution and Precipitation Heat Treated and Aged | ||||
| AMS5518F | Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni Cold Rolled, 150 Ksi (1034 MPa) Tensile Strength | ||||
| AMS5518C | Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni Cold Rolled, 150 Ksi (1034 MPa) Tensile Strength | ||||
| AMS5518D | Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni Cold Rolled, 150 Ksi (1034 MPa) Tensile Strength | ||||
| AMS5518A | Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni Cold Rolled, 150 Ksi (1034 MPa) Tensile Strength | ||||
| AMS5518J | Steel, Corrosion Resistant, Sheet and Strip, 18cr 8ni (SAE 30301) Cold Rolled, 150 Ksi (1034 Mpa) Tensile Strength | ||||
| AMS5518B | Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni Cold Rolled, 150 Ksi (1034 MPa) Tensile Strength | ||||
| AMS4881D | Nickel-Aluminum-Bronze, Martensitic, Sand, Centrifugal and Continuous Castings, 78Cu - 11Al - 5.1Ni - 4.8Fe, Quench Hardened and Temper Annealed | ||||
| AMS5578F | Steel, Corrosion and Heat-Resistant, Welded Tubing 12cr 8.5ni 0.30cb 1.1ti 2.0cu Vacuum Induction Plus Consumable Electrode Vacuum Melted Solution Heat Treated, Precipitation Hardenable | ||||
| AMS5578C | Steel, Corrosion and Heat-Resistant, Welded Tubing 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu Vacuum Induction Plus Consumable Electrode Vacuum Melted, Solution Heat Treated, Precipitation Hardenable | ||||
| AMS4881C | Nickel-Aluminum-Bronze, Martensitic, Sand and Centrifugal Castings, 78Cu - 11Al - 5.1Ni - 4.8Fe, Quench Hardened and Temper Annealed | ||||
| AMS5617J | Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 12Cr - 8.5Ni - 1.2Ti - 2.0Cu, Vacuum Induction Plus Vacuum Consumable Electrode Melted, Solution Heat Treated, Precipitation Hardenable | ||||
| AMS5578D | Steel, Corrosion and Heat Resistant, Welded Tubing 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu Vacuum Induction Plus Consumable Electrode Vacuum Melted Solution Heat Treated, Precipitation Hardenable | ||||
| AMS5617G | Steel Bars, Wire, and Forgings, Corrosion Resistant, 12Cr - 8.5Ni - 1.2Ti - 2.0Cu, Vacuum Induction Plus Vacuum Consumable Electrode Melted, Solution Heat Treated, Precipitation Hardenable | ||||
| AMS5617E | Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 12Cr - 8.5Ni - 1.2Ti - 2.0Cu, Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable | ||||
| AMS5617H | Steel, Corrosion Resistant, Bars, Wire, and Forgings 12cr 8.5ni 1.2ti 2.0cu Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable | ||||
| AMS5617F | Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 12Cr - 8.5Ni - 1.2Ti - 2.0Cu, Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable | ||||
| AMS5617C | Steel, Corrosion-Resistant, Bars, Wire, and Forgings, 12Cr - 8.5Ni - 1.2Ti - 2.0Cu, Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable | ||||
| AMS5529D | Steel, Corrosion Resistant, Sheet and Strip, 17Cr - 7.1Ni - 1.1Al, Solution Heat Treated and Cold Rolled, Precipitation Hardenable, 0.0015 to 0.050 Inch (0.038 to 1.27 mm) Nominal Thickness | ||||
| AMS4965J | Titanium Alloy, Bars, Wire, Forgings, and Rings, 6.0AI - 4.0V, Solution Heat Treated and Aged | ||||
| AMS4965F | Titanium Alloy, Bars, Wire, Forgings, and Rings, 6.0AI - 4.0V, Solution Heat Treated and Aged | ||||
| AMS3217/2 | Test Slabs, Acrylonitrile Butadiene (Nbr-L), Low Acrylonitrile, 65-75 | ||||
| AMS4965H | Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0al 4.0v Solution Heat Treated and Aged | ||||
| AMS3217/2C | Test Slabs, Acrylonitrile Butadiene (Nbr-L), Low Acrylonitrile, 65-75 | ||||
| AMS3277 | Sealing Compound, Polythioether Integral Fuel Tanks and General Purpose, Fast Curing Intermittent Use to 360脗掳F (182脗掳C) | ||||
| AMS3217/2A | Test Slabs, Acrylonitrile Butadiene (Nbr-L), Low Acrylonitrile, 65-75 | ||||
| AMS3277A | Sealing Compound, Polythioether Integral Fuel Tanks and General Purpose, Fast Curing Intermittent Use to 360脗掳F (182脗掳C) | ||||
| AMS3217/2B | Test Slabs, Acrylonitrile Butadiene (Nbr-L), Low Acrylonitrile, 65-75 | ||||
| AMS2310E | Qualification Sampling and Testing of Steels Transverse Tensile Properties | ||||
| AMS2310D | Qualification Sampling and Testing of Steels, Transverse Tensile Properties | ||||
| AMS2310F | Qualification Sampling and Testing of Steels for Transverse Tensile Properties |
若您对上表中数据有任何疑问，请与网站联系。
