（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ARP1313A | Determination of Trace Elements in High Temperature Alloys | ||||
| AMS3277F | Sealing Compound, Polythioether Rubber, Fast Curing Integral Fuel Tanks and General Purpose, Intermittent Use to 400脗掳F (204脗掳C) | ||||
| ARP1313C | Determination of Trace Elements in High Temperature Alloys | ||||
| ARP1313D | Determination of Trace Elements in High Temperature Alloys(STABILIZED Nov 2014) | ||||
| ARP1313B | Determination of Trace Elements in High Temperature Alloys | ||||
| AMS6250L | Steel Bars, Forgings, and Tubing, 1.5Cr - 3.5Ni (0.07 - 0.13C) (3310) | ||||
| AMS6250K | Steel Bars, Forgings, and Tubing, 1.5Cr - 3.5Ni (0.07 - 0.13C) (SAE 3310) | ||||
| AMS6250J | Steel Bars, Forgings, and Tubing 1.5cr 3.5ni (0.07-0.13c) (SAE 3310) | ||||
| AMS6250H | Steel Bars, Forgings, and Tubing, 1.5Cr - 3.5Ni (0.07 - 0.13 C) (SAE 3310) | ||||
| AMS1424/1 | Deicing/Anti-Icing Fluid, Aircraft SAE Type I Glycol (Conventional and Non-Conventional) Based | ||||
| AS4842 | Fittings and Bosses, Pipe Threaded, Fluid Connection | ||||
| AS4842 | Fittings and Bosses, Pipe Threaded, Fluid Connection | ||||
| AS1895/4 | Coupling, V-Retainer, Single Latch, Type II Low Profile | ||||
| AS1895/4C | Coupling, V-Retainer, Single Latch, Type Ii, Low Profile | ||||
| AS1895/4D | Coupling, V-Retainer, Single Latch, Type II Low Profile | ||||
| AS1895/4B | Coupling, V-Retainer, Single Latch, Type II Low Profile | ||||
| AS1895/4 | Coupling, V-Retainer, Single Latch, Type II Low Profile | ||||
| AS1895/4A | Coupling, V-Retainer, Single Latch, Type II Low Profile | ||||
| J2295_199810 | Fasteners--Part Standard--Cap Screws, Hex Bolts, and Hex Nuts | ||||
| J2295_200404 | Fastener Part Standard Caps Screws, Hex Bolts, and Hex Nuts (inch Dimensioned) | ||||
| AMS4135G | Aluminum Alloy, Forgings 4.5Cu 0.85Si 0.8Mn 0.5Mg | ||||
| J2295_199608 | Fasteners Part Standard--Cap Screws, Hex Bolts, and Hex Nuts (Inch Dimensioned) | ||||
| AMS4135K | Aluminum Alloy, Forgings 4.5Cu 0.85Si 0.8Mn 0.5Mg | ||||
| AMS4135H | Aluminum Alloy, Forgings 4.5Cu 0.85Si 0.8Mn 0.5Mg | ||||
| AS408B | Pressure Instruments - Fuel, Oil, and Hydraulic (Reciprocating Engine Powered Aircraft) | ||||
| ARP9005 | Aerospace Guidance for Non-Deliverable Software | ||||
| ARP4163 | Balancing Machines: Tooling Design Criteria | ||||
| AMSS13165 | Shot Peening of Metal Parts | ||||
| ARP1616A | Self-Sealing Breakaway Valves for Crash-Resistant Aircraft Fuel and Oil Systems | ||||
| AMSS13165A | Shot Peening of Metal Parts(Cancelled Dec 2007) | ||||
| ARP9005 | Aerospace Guidance for Non-Deliverable Software | ||||
| AS15531 | Digital Time Division Command/Response Multiplex Data Bus | ||||
| AS1718 | Coupling Body, Flexible, Variable Cavity, Threaded, Ferrule Type Tube Ends | ||||
| AS1718D | Coupling Body, Flexible, Variable Cavity, Threaded, Ferrule Type Tube Ends | ||||
| AS1718C | Coupling Body, Flexible, Variable Cavity, Threaded Ferrule Type Tube Ends | ||||
| AS8791C | Hydraulic and Pneumatic Retainers (Back-Up Rings), Polytetrafluoroethylene (PTFE) Resin | ||||
| AS8791 | Retainer, Packing, Hydraulic, and Pneumatic, Tetrafluoroethylene Resin | ||||
| AS8791A | Hydraulic and Pneumatic Retainers (Back-Up Rings), Polytetrafluoroethylene (Ptfe) Resin | ||||
| CRP-004 | Recommended Methods for Conducting Corrosion Tests in Gasoline/Methanol Fuel Mixtures | ||||
| AS8791B | Hydraulic and Pneumatic Retainers (Back-Up Rings), Polytetrafluoroethylene (PTFE) Resin | ||||
| ARP5414 | Aircraft Lightning Zoning | ||||
| ARP5414 | Aircraft Lightning Zoning | ||||
| AS4375B | Fitting End, Flareless, Design Standard | ||||
| ARP5414A | Aircraft Lightning Zoning | ||||
| AS4375C | Fitting End, Flareless, Design Standard | ||||
| AMS4344 | Aluminum Alloy, Extrusions, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T73511), Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged | ||||
| AMS4344A | Aluminum Alloy, Extrusions, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T73511), Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged | ||||
| AMS3304 | Silicone Rubber, General Purpose, 70 Durometer | ||||
| AMS4344D | Aluminum Alloy, Extrusions, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T73511), Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged | ||||
| AS4375A | Fitting End, Flareless, Design Standard |
若您对上表中数据有任何疑问，请与网站联系。
