（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| AS6317 | SAE Configuration Management Requirements For NASA | ||||
| AS83519/7 | SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENTAL RESISTANT, PRE-INSTALLED GROUND LEAD, CLASS 1, 200 DEG C | ||||
| AS6351 | Test Methods for Low Pressure Couplings, Components, and Ducting | ||||
| AS6171/2 | Techniques for Suspect/Counterfeit EEE Parts Detection by External Visual Inspection, Remarking and Resurfacing, and Surface Texture Analysis Test Methods | ||||
| AS6356 | Assembled Coupling, Threadless-Flexible, Fixed Cavity, High Conductivity, Self Bonding, Envelope Dimensions | ||||
| AS6171/16 | Techniques for Suspect/Counterfeit EEE Parts Detection by Netlist Assurance Test Methods | ||||
| AS6171/5 | Techniques for Suspect/Counterfeit EEE Parts Detection by Radiological Test Methods | ||||
| AS6171/3 | Techniques for Suspect/Counterfeit EEE Parts Detection by X-Ray Fluorescence Test Methods | ||||
| AS6171/6 | Techniques for Suspect/Counterfeit EEE Parts Detection by Accoustic Microscopy (AM) Test Methods | ||||
| AS6171/4 | Techniques for Suspect/Counterfeit EEE Parts Detection by Delid/Decapsulation Physical Analysis Test Methods | ||||
| AS6171/1 | Suspect/Counterfeit Test Evaluation Method | ||||
| AS6171 | Test Methods Standard; General Requirements, Suspect/Counterfeit, Electrical, Electronic, and Electromechanical Parts | ||||
| AS6171/13 | Technique for Suspect/Counterfeit EEE Parts Detection by Secondary Ion Mass Spectrometry (SIMS) Test Method | ||||
| AS5616 | O-RINGS MOLDED FROM AMSXXX ______ MATERIAL | ||||
| AS6171/12 | TECHNIQUES FOR SUSPECT/COUNTERFEIT EEE PARTS DETECTION OF CAPACITORS BY ACOUSTIC MICROSCOPY (AM) TEST METHODS | ||||
| AS39029/126 | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, COAXIAL, SIZE 12, WITH AS22520 TOOL PART NUMBERS (FOR MIL-DTL-38999 SERIES I, II, III AND IV CONNECTORS) | ||||
| AS6171/11 | Techniques for Suspect/Counterfeit EEE Parts Detection by Design Recovery Test Methods | ||||
| AS6171/10 | Techniques for Suspect/Counterfeit EEE Parts Detection by Thermogravimetric Analysis (TGA) Test Methods | ||||
| AS39029/115 | AS39029/115 CONTACT, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, COAXIAL, SIZE 12, (FOR MIL-DTL-38999 | ||||
| AS22520/7 | CRIMPING TOOL AND ACCESSORIES, DIES, SIZE 8 TO 0000 | ||||
| AMS7001 | Ni Base 625 Super Alloy Powder for use in Laser Powder Bed Add Mfg Machines | ||||
| AMS6885 | Carbon Fiber Tape Repair Prepreg, 120脗掳C (250 脗掳F) Vacuum Curing | ||||
| AMS2750/1 | AMS2750/1 - Pyrometry for Non-Metallics | ||||
| AMECSE14AA | CONTROLLED PNEUMATIC NEEDLE PEENING AND FORMING | ||||
| AMEC14AC | Gas Pressure Quenching | ||||
| AIR6508 | Unconventional Propulsion Cycles' Station Designation and Nomenclature | ||||
| AMEC14AA | Heat Treating Salts | ||||
| AIR6903 | Guide for achieving plating/finish compatibility with connectors and accessories used in Electrical Wiring Interconnect Systems (EWIS). | ||||
| AIR6345 | SIMULATING INLET DYNAMIC TOTAL-PRESSURE DISTORTION | ||||
| AIR6465 | Guidelines for Obtaining Quality Inlet/Engine Compatibility Test Measurements | ||||
| AIR6292 | Guidelines for Repair Process Evaluation of Fiber Reinforced Composite Bonded Structure | ||||
| AIR6273 | Terms and Definitions - Fraudulent/Counterfeit Electronic Parts | ||||
| AMS5540M | Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 74ni 15.5cr 8.0fe, Annealed | ||||
| AMS5540N | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 74Ni - 15.5Cr - 8.0Fe, Annealed | ||||
| AMS5540F | Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 74ni 15.5cr 8.0fe, Annealed | ||||
| AMS5540C | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 74Ni - 15.5Cr - 8.0Fe, Annealed | ||||
| AMS5540A | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 74Ni - 15.5Cr - 8.0Fe, Annealed | ||||
| AMS5540 | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 74Ni - 15.5Cr - 8.0Fe, Annealed | ||||
| AMS5069 | Steel Bars, Forgings, and Tubing, 0.15 - 0.20C (SAE 1018) | ||||
| AMS5069A | Steel Bars, Forgings, and Tubing, 0.15 - 0.20C (SAE 1018) | ||||
| AMS5069B | Steel Bars, Forgings, and Tubing, 0.15 - 0.20C (SAE 1018) | ||||
| AMS5069C | Steel Bars, Forgings, and Tubing, 0.15 - 0.20C (SAE 1018) | ||||
| AMS4221B | Aluminum Alloy, Plate 4.4cu 1.5mg 0.60mn (2124-T8151) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated | ||||
| AMS4221C | Aluminum Alloy, Plate, 4.4Cu - 1.5Mg - 0.60Mn (2124-T8151) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated | ||||
| AMS4213A | Aluminum Alloy Plate (2027-T351) 4.4Cu - 1.2Mg - 0.8Mn - 0.10Zr, Solution Heat Treated, Cold Worked and Naturally Aged | ||||
| AMS4221D | Aluminum Alloy, Plate, 4.4Cu - 1.5Mg - 0.60Mn (2124-T8151) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated | ||||
| AMS4221 | Aluminum Alloy, Plate, 4.4Cu - 1.5Mg - 0.60Mn (2124-T8151) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated | ||||
| AMS4213 | Aluminum Alloy Plate (2027-T351) 4.4Cu - 1.2Mg - 0.8Mn - 0.10Zr, Solution Heat Treated, Cold Worked and Naturally Aged | ||||
| AMS4221A | Aluminum Alloy, Plate 4.4cu 1.5mg 0.60mn (2124-T8151) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated | ||||
| AMS4221 | Aluminum Alloy, Plate, 4.4Cu - 1.5Mg - 0.60Mn (2124-T8151) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated |
若您对上表中数据有任何疑问，请与网站联系。
