（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| AMS2241N | Tolerances Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire | ||||
| AMS2241R | Tolerances, Corrosion and Heat-Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire | ||||
| AMS2241S | Tolerances, Corrosion and Heat-Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire | ||||
| AMS2241C | Tolerances, Corrosion and Heat-Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire | ||||
| AMS5667H | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Equalized, Precipitation Hardenable | ||||
| AMS2241D | Tolerances, Corrosion and Heat-Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire | ||||
| AMS5667G | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Equalized, Precipitation Hardenable | ||||
| AMS5667J | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Equalized, Precipitation Hardenable | ||||
| AMS2241L | Tolerances, Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire | ||||
| AMS5667K | Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 72ni 15.5cr 0.95(Cb + Ta) 2.5ti 0.70al 7.0fe, Equalized, Precipitation Hardenable | ||||
| AMS5667A | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Equalized, Precipitation Hardenable | ||||
| AMS5667B | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Equalized, Precipitation Hardenable | ||||
| AMS5667 | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Equalized, Precipitation Hardenable | ||||
| EIA649_1 | Configuration Management Requirements For Defense Contracts | ||||
| EIA649_1 | Configuration Management Requirements For Defense Contracts | ||||
| AS7471C | Bolts and Screws, Nickel Alloy, Uns N07001 Tensile Strength 165 Ksi, Corrosion and Heat Resistant Procurement Specification | ||||
| AS5942 | Marking of Electrical Insulating Materials | ||||
| AS5586 | Aerospace - General Requirements for Hydraulic System Reservoirs | ||||
| AS7471A | Bolts and Screws, Nickel Alloy, UNS N07001 Tensile Strength 165 ksi, Corrosion and Heat Resistant, Procurement Specification | ||||
| AS7471B | Bolts and Screws, Nickel Alloy, Uns N07001 Tensile Strength 165 Ksi, Corrosion and Heat Resistant Procurement Specification | ||||
| AS5488A | Regional Aircraft Towbar Attach Fitting Interface(STABILIZED Jun 2011) | ||||
| AS5586 | Aerospace - General Requirements for Hydraulic System Reservoirs | ||||
| AS34521A | Connector, Receptacle, Electric, Box Mounting, Rear Release, Crimp Contact, AN Type With | ||||
| AS1614D | Main Line Aircraft Tow Bar Attach Fitting Interface | ||||
| AS34521B | CONNECTOR, RECEPTACLE, ELECTRIC, BOX MOUNTING, REAR RELEASE, CRIMP CONTACT, AN TYPE | ||||
| AMSC27725 | Coating, Corrosion Preventive, Polyurethane For Aircraft Integral Fuel Tanks for Use to 250 脗掳F (121 脗掳C) | ||||
| AS34521 | Connector, Receptacle, Electric, Box Mounting, Rear Release, Crimp Contact, An Type With | ||||
| AS1614C | Main Line Aircraft Towbar Attach Fitting Interface | ||||
| AS1614 | Main Line Aircraft Towbar Attach Fitting Interface | ||||
| AS1614B | Commercial Aircraft Towbar Attach Fitting Interface | ||||
| AMSC27725D | Coating, Corrosion Preventative, for Aircraft Integral Fuel Tanks for Use to 250 脗掳F (121 脗掳C) | ||||
| AS1614A | Main Line Aircraft Towbar Attach Fitting Interface | ||||
| AMSC27725A | Coating, Corrosion Preventive, Polyurethane For Aircraft Integral Fuel Tanks for Use to 250 脗掳F (121 脗掳C) | ||||
| AMSC27725C | Coating, Corrosion Preventive, Polyurethane For Aircraft Integral Fuel Tanks for Use to 250 脗掳F (121 脗掳C) | ||||
| AMSC27725B | Coating, Corrosion Preventive, Polyurethane For Aircraft Integral Fuel Tanks for Use to 250 脗掳F (121 脗掳C) | ||||
| AMSQQA250 | Aluminum and Aluminum Alloy, Plate and Sheet General Specification For | ||||
| AMS6382P | Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Annealed | ||||
| AMS7734 | Nickel-Iron Alloy Wire, Copper Clad, Round, 42Ni - 56.5Fe, Annealed Dumet | ||||
| AMS6516A | Steel, Bars and Forgings, 1Cr - 10Ni - 7Co - 2Mo 芒聙聯 1.3W 芒聙聯 0.1V (0.28 - 0.32C) Vacuum Induction Melted, Vacuum Arc Remelted, Normalized and Annealed, Precipitation Hardenable | ||||
| AMS6516 | Steel, Bars and Forgings, 1Cr - 10Ni - 7Co - 2Mo 芒聙聯 1.3W 芒聙聯 0.1V (0.28 - 0.32C) Vacuum Induction Melted, Vacuum Arc Remelted, Normalized and Annealed, Precipitation Hardenable | ||||
| AMS6304K | Low-Alloy Steel, Heat-Resistant, Bars, Forgings, and Tubing, 0.95Cr - 0.55Mo - 0.30V (0.40 - 0.50C) | ||||
| AMS6382A | Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Annealed | ||||
| AMS6382 | Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Annealed | ||||
| AMS6382C | Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Annealed | ||||
| AMS6382B | Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Annealed | ||||
| AMS6382D | Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Annealed | ||||
| AMS6382E | Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Annealed | ||||
| AMS5786E | Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 62.5ni 5.0cr 24.5mo 5.5fe | ||||
| AMS5786C | Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, 62.5Ni - 5.0Cr - 24.5Mo - 5.5Fe | ||||
| AMS5786D | Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 62.5ni 5.0cr 24.5mo 5.5fe |
若您对上表中数据有任何疑问，请与网站联系。
