（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| AMS4108 | Aluminum Alloy, Hand Forgings, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged | ||||
| AMS5762E | Steel, Corrosion Resistant, Bars, Wire, and Forgings, 5.8Mn - 17Cr - 5.8Ni - 2.0Cu - 0.26S, Free Machining, Solution Heat Treated | ||||
| AMS6263H | Steel Bars, Forgings, and Tubing, 1.2Cr - 3.2Ni - 0.12Mo (0.11 - 0.17C) (SAE 9315) | ||||
| AMS6263E | Steel Bars, Forgings, and Tubing, 1.2Cr - 3.2Ni - 0.12Mo (0.11 - 0.17C) | ||||
| AMS6263G | Steel Bars, Forgings, and Tubing, 1.2Cr - 3.2Ni - 0.12Mo (0.11 - 0.17C) | ||||
| AMS6263D | Steel Bars, Forgings, and Tubing, 1.2Cr - 3.2Ni - 0.12Mo (0.11 - 0.17C) | ||||
| AMS6263F | Steel Bars, Forgings, and Tubing, 1.2Cr - 3.2Ni - 0.12Mo (0.11 - 0.17C) | ||||
| AMS6263C | Steel Bars, Forgings, and Tubing, 1.2Cr - 3.2Ni - 0.12Mo (0.11 - 0.17C) | ||||
| AMS6263A | Steel Bars, Forgings, and Tubing, 1.2Cr - 3.2Ni - 0.12Mo (0.11 - 0.17C) | ||||
| AMS6263B | Steel Bars, Forgings, and Tubing, 1.2Cr - 3.2Ni - 0.12Mo (0.11 - 0.17C) | ||||
| AS25244_A1 | Circuit Breaker, Trip-Free, Push-Pull, 5 Thru 50 Amp, Type I | ||||
| AMS5652J | Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 25Cr - 20Ni - 2.0Si (314) Solution Heat Treated | ||||
| AS29513 | Packing, Preformed, Hydrocarbon Fuel-Resistant, "O" Ring | ||||
| AS39901B | Bearings, Roller, Needle, Airframe, Antifriction, Inch | ||||
| AS1732A | Body, Coupling, Rigid, Fixed Cavity, Threaded, Ferrule Type Tube Ends, Type I | ||||
| AS1732 | Body, Coupling, Rigid, Fixed Cavity, Threaded, Ferrule Type Tube Ends, Type I | ||||
| AS39901A | Bearings, Roller, Needle, Airframe, Antifriction, Inch | ||||
| ARP5448/9A | Plain Bearing Lined Inside Diameter Plug Gaging | ||||
| ARP5448/9 | Plain Bearing Lined Inside Diameter Plug-Gaging | ||||
| AS39901 | Bearings, Roller, Needle, Airframe, Antifriction, Inch | ||||
| AS1732D | Body, Coupling, Rigid, Fixed Cavity, Threaded, Ferrule Type Tube Ends, Type I | ||||
| AS1732B | Body, Coupling, Rigid, Fixed Cavity, Threaded, Ferrule Type Tube Ends, Type I | ||||
| AS1732C | Body, Coupling, Rigid, Fixed Cavity, Threaded, Ferrule Type Tube Ends, Type I | ||||
| AS1895/14 | Flange End, Male, Type II Low Profile, Design Standard | ||||
| AS1895/14A | Flange End, Male, Type II Low Profile, Design Standard | ||||
| AS1895/14B | Flange End, Male, Type II Low Profile, Design Standard | ||||
| AMS4108B | Aluminum Alloy, Hand Forgings, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged | ||||
| AS1895/14D | Flange End, Male, Type II Low Profile, Design Standard | ||||
| AMS4108E | Aluminum Alloy, Hand Forgings, 6.2zn 2.3cu 2.2mg 0.12zr Solution Heat Treated, Compression Stress-Relieved, and Overaged | ||||
| AMS4108D | Aluminum Alloy, Hand Forgings, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged | ||||
| AMS2431/1 | Peening Media (ASR), Cast Steel Shot, Regular Hardness (45 to 52 HRC) | ||||
| AMS2431/1 | Peening Media (ASR), Cast Steel Shot, Regular Hardness (45 to 52 HRC) | ||||
| AMS2431/1E | Peening Media (ASR), Cast Steel Shot, Regular Hardness (45 to 52 HRC) | ||||
| AMS2431/1B | Peening Media (ASR) Cast Steel Shot, Regular Hardness (45 to 52 HRC) | ||||
| AMS2431/1A | Peening Media (ASR), Cast Steel Shot, Regular Hardness (45 to 52 HRC) | ||||
| AMS2431/1D | Peening Media (ASR), Cast Steel Shot, Regular Hardness (45 to 52 HRC) | ||||
| AMS2431/1C | Peening Media (Asr) Cast Steel Shot, Regular Hardness (45 to 52 Hrc) | ||||
| AS1732E | Body, Coupling, Rigid, Fixed Cavity, Threaded, Ferrule Type Tube Ends, Type I | ||||
| AMS2251H | Tolerances, Low-Alloy Steel Bars | ||||
| AMS2251 | Tolerances, Low-Alloy Steel Bars | ||||
| AMS2251A | Tolerances, Low-Alloy Steel Bars | ||||
| AMS2251B | Tolerances, Low-Alloy Steel Bars | ||||
| AMS2251C | Tolerances, Low-Alloy Steel Bars | ||||
| AS22520/1 | CRIMPING TOOLS, TYPE I, TERMINAL, HAND, WIRE TERMINATION FOR WIRE BARREL SIZES 12 THROUGH 22 AND COAXIAL INNER CONTACTS | ||||
| AMS2251D | Tolerances, Low-Alloy Steel Bars | ||||
| AMS2251F | Tolerances, Low-Alloy Steel Bars | ||||
| AMS2251E | Tolerances, Low-Alloy Steel Bars | ||||
| MA3426 | Nut, Castellated, Hex-UNS S66286, Silver Plate, MJ Thread, Metric | ||||
| MA3426 | Nut, Castellated, Hex-UNS S66286, Silver Plate, MJ Thread, Metric | ||||
| AS24464 | Bearing, Roller, Needle-Double Row, Heavy Duty, Self-Aligning, Type Iv, Antifriction, Inch |
若您对上表中数据有任何疑问，请与网站联系。
