（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| IEC 61851-1 Ed. 2.0 | Electric vehicle conductive charging system - Part 1: General requirements | ||||
| IEC 61851-21 Ed. 1.0 | Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c./d.c. supply | ||||
| IEC 61851-22 Ed. 1.0 | Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station | ||||
| IEC 61851-23 Ed. 1.0 | Electric vehicle conductive charging system - Part 23: DC electric vehicle charging station | ||||
| IEC 61980-1 Ed. 1.0 | Electric vehicle wireless power transfer (WPT) systems - Part 1: General requirements | ||||
| IEC 61851-24 Ed. 1.0 Cor.1 | Corrigendum 1 - Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging | ||||
| IEC 61851-24 Ed. 1.0 | Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging | ||||
| IEC 62196-1 Ed. 3.0 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements | ||||
| IEC 62196-3 Ed. 1.0 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers | ||||
| IEC 62196-2 Ed. 2.0 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories | ||||
| IEC 62321-1 Ed. 1.0 | Determination of certain substances in electrotechnical products - Part 1: Introduction and overview | ||||
| IEC 62321 Ed. 1.0 | Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) | ||||
| IEC 62321-3-1 Ed. 1.0 | Determination of certain substances in electrotechnical products - Part 3-1: Screening - Lead, mercury, cadmium, total chromium and total bromine using X-ray fluorescence spectrometry | ||||
| IEC 62321-2 Ed. 1.0 | Determination of certain substances in electrotechnical products - Part 2: Disassembly, disjunction and mechanical sample preparation | ||||
| IEC 62321-4 Ed. 1.0 | Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS | ||||
| IEC 62321-3-2 Ed. 1.0 | Determination of certain substances in electrotechnical products - 3-2: Screening - Total bromine in polymers and electronics by Combustion - Ion Chromatography | ||||
| IEC 62321-5 Ed. 1.0 | Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS | ||||
| IEC 62321-6 Ed. 1.0 | Determination of certain substances in electrotechnical products - Part 6: Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatograhy -mass spectometry (GC-MS) | ||||
| IEC 62321-7-1 Ed. 1.0 | Determination of certain substances in electrotechnical products - Part 7-1: Hexavalent chromium - Presence of hexavalent chromium (Cr(VI)) in colourless and coloured corrosion-protected coatings on metals by the colorimetric method | ||||
| IEC/TR 62343-6-2 Ed. 2.0 | Dynamic modules - Part 6-2: Design guide - Software and hardware interfaces - Survey results | ||||
| IEC 62430 Ed. 1.0 | Environmentally conscious design for electrical and electronic products | ||||
| IEC 62485-3 Ed. 2.0 | Safety requirements for secondary batteries and battery installations - Part 3: Traction batteries | ||||
| IEC/TR 62476 Ed. 1.0 | Guidance for evaluation of product with respect to substance-use restrictions in electrical and electronic products | ||||
| IEC/PAS 62545 Ed. 1.0 | Environmental information on Electrical and Electronic Equipment (EIEEE) | ||||
| IEC 62576 Ed. 1.0 | Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics | ||||
| IEC 62660-2 Ed. 1.0 | Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2: Reliability and abuse testing | ||||
| IEC 62660-1 Ed. 1.0 | Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing | ||||
| IEC/TS 62763 Ed. 1.0 | Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire | ||||
| ISO 10054:1998 | Internal combustion compression-ignition engines - Measurement apparatus for smoke from engines operating under steady-state conditions - Filter-type smokemeter | ||||
| ISO 10230:1990 | Cycles - Splined hub and sprocket - Mating dimensions | ||||
| ISO 10190:2008 | Motorcycle chains - Characteristics and test methods | ||||
| ISO/TR 10305-1:2003 | Road vehicles - Calibration of electromagnetic field strength measuring devices - Part 1: Devices for measurement of electromagnetic fields at frequencies > 0 Hz | ||||
| ISO/TR 10305-2:2003 | Road vehicles - Calibration of electromagnetic field strength measuring devices - Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz | ||||
| ISO 10326-1:1992/Amd 2:2011 | Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements - Amendment 2 | ||||
| ISO 10326-1:1992/Amd 1:2007 | Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements - Amendment 1 | ||||
| ISO 10355:2004 | Mopeds - Positioning of lighting and light-signalling devices | ||||
| ISO 10326-1:1992 | Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements | ||||
| ISO 10455:1992 | Road vehicles - Dry ignition coils using rotating high-voltage distributor | ||||
| ISO 10392:2011 | Road vehicles - Determination of centre of gravity | ||||
| ISO 10483-1:2004 | Road vehicles - Intelligent power switches - Part 1: High-side intelligent power switch | ||||
| ISO 10486:1992 | Passenger cars - Car radio identification number (CRIN) | ||||
| ISO 10483-2:1996 | Road vehicles - Intelligent power switches - Part 2: Low-side intelligent power switch | ||||
| ISO 10487-2:1995 | Passenger cars - Connections for car radios - Part 2: Performance requirements | ||||
| ISO 10487-1:1992 | Passenger car radio connections - Part 1: Dimensions and general requirements | ||||
| ISO 10521-1:2006 | Road vehicles - Road load - Part 1: Determination under reference atmospheric conditions | ||||
| ISO 10604:1993 | Road vehicles - Measurement equipment for orientation of headlamp luminous beams | ||||
| ISO 10599-2:1997/Cor 1:2005 | Car radios - Coaxial aerial connectors - Part 2: Characteristic values, performance requirements and tests - Technical Corrigendum 1 | ||||
| ISO 10521-2:2006 | Road vehicles - Road load - Part 2: Reproduction on chassis dynamometer | ||||
| ISO 10599-1:1992 | Car radios - Coaxial aerial connectors - Part 1: Dimensions | ||||
| ISO/TR 10603:1992 | Road vehicles - Legal situation concerning lighting and light-signalling devices |
若您对上表中数据有任何疑问，请与网站联系。
