（清空日期可显示全部记录）
| 标准编号 | 标准名称 | 发布日期 | 实施日期 | 废止日期 | 替换信息 |
|---|---|---|---|---|---|
| ISO 10605:2008 | Road vehicles - Test methods for electrical disturbances from electrostatic discharge | ||||
| ISO 10599-2:1997 | Car radios - Coaxial aerial connectors - Part 2: Characteristic values, performance requirements and tests | ||||
| ISO 10605:2008/Amd 1:2014 | Road vehicles - Test methods for electrical disturbances from electrostatic discharge - Amendment 1 | ||||
| ISO 10597:2012 | Road vehicles - Flat attachment fixing nuts for commercial vehicles - Test methods | ||||
| ISO 10681-1:2010 | Road vehicles - Communication on FlexRay - Part 1: General information and use case definition | ||||
| ISO 10605:2008/Cor 1:2010 | Road vehicles - Test methods for electrical disturbances from electrostatic discharge - Technical Corrigendum 1 | ||||
| ISO 10681-2:2010 | Road vehicles - Communication on FlexRay - Part 2: Communication layer services | ||||
| ISO 10865-1:2012 | Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers - Part 1: Systems for rearward-facing wheelchair-seated passengers | ||||
| ISO 10924-4:2015 | Road vehicles - Circuit breakers - Part 4: Medium circuit breakers with tabs (Blade type), Form CB15 | ||||
| ISO 10865-2:2015 | Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers - Part 2: Systems for forward-facing wheelchair-seated passengers | ||||
| ISO 10844:2014 | Acoustics - Specification of test tracks for measuring noise emitted by road vehicles and their tyres | ||||
| ISO 10924-3:2015 | Road vehicles - Circuit breakers - Part 3: Miniature circuit breakers with tabs (Blade type), Form CB11 | ||||
| ISO 10924-2:2014 | Road vehicles - Circuit breakers - Part 2: User's guide | ||||
| ISO 10924-1:2009 | Road vehicles - Circuit breakers - Part 1: Definitions and general test requirements | ||||
| ISO/TR 10992:2011 | Intelligent transport systems - Use of nomadic and portable devices to support ITS service and multimedia provision in vehicles | ||||
| ISO 10997:1996 | Passenger vehicles - Side impact with deformable moving barrier - Full scale test | ||||
| ISO/TR 10982:2013 | Road vehicles - Test procedures for evaluating out-of-position vehicle occupant interactions with deploying air bags | ||||
| ISO 1102:2001 | Commercial road vehicles - 50 mm drawbar eye - Interchangeability | ||||
| ISO 11012:2009 | Heavy commercial vehicles and buses - Open-loop test methods for the quantification of on-centre handling - Weave test and transition test | ||||
| ISO 11055:1996 | Flywheels for reciprocating internal combustion engines - Installation dimensions for clutches | ||||
| ISO 1103:2007 | Road vehicles - Coupling balls for caravans and light trailers - Dimensions | ||||
| ISO 11026:2010 | Heavy commercial vehicles and buses - Test method for roll stability - Closing-curve test | ||||
| ISO 11157:2005 | Road vehicles - Brake lining assemblies - Inertia dynamometer test method | ||||
| ISO/TS 11155-1:2001 | Road vehicles - Air filters for passenger compartments - Part 1: Test for particulate filtration | ||||
| ISO/PAS 11154:2006 | Road vehicles - Roof load carriers | ||||
| ISO 11096:2011 | Road vehicles - Pedestrian protection - Impact test method for pedestrian thigh, leg and knee | ||||
| ISO 11406:2001/Cor 1:2005 | Commercial road vehicles - Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers - Interchangeability - Technical Corrigendum 1 | ||||
| ISO 11155-2:2009 | Road vehicles - Air filters for passenger compartments - Part 2: Test for gaseous filtration | ||||
| ISO 11406:2001 | Commercial road vehicles - Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers - Interchangeability | ||||
| ISO 11407:2004 | Commercial road vehicles - Mechanical coupling between towing vehicles, with coupling mounted forward and below, and centre-axle trailers - Interchangeability | ||||
| ISO 11439:2013 | Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles | 2013-06-01 | |||
| ISO 11243:1994 | Cycles - Luggage carriers for bicycles - Concepts, classification and testing | ||||
| ISO 11425:1996 | Rubber hoses and hose assemblies for automobile power-steering systems - Specification | ||||
| ISO 11451-1:2015 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology | ||||
| ISO 11446-2:2012 | Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 2: 13-pole connectors for vehicles with 12 V nominal supply voltage intended to cross water fords | ||||
| ISO 11452-1:2015 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology | ||||
| ISO 11451-2:2015 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Off-vehicle radiation sources | ||||
| ISO 11451-4:2013 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Bulk current injection (BCI) | ||||
| ISO 11451-3:2015 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: On-board transmitter simulation | ||||
| ISO 11446-1:2012 | Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 1: 13-pole connectors for vehicles with 12 V nominal supply voltage not intended to cross water fords | ||||
| ISO 11452-10:2009 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 10: Immunity to conducted disturbances in the extended audio frequency range | ||||
| ISO 11452-3:2001 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: Transverse electromagnetic mode (TEM) cell | ||||
| ISO 11452-2:2004 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure | ||||
| ISO 11452-11:2010 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 11: Reverberation chamber | ||||
| ISO 11452-4:2011 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods | ||||
| ISO 11452-5:2002 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 5: Stripline | ||||
| ISO 11452-8:2015 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields | ||||
| ISO 11452-7:2003/Amd 1:2013 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7: Direct radio frequency (RF) power injection - Amendment 1 | ||||
| ISO 11452-7:2003 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7: Direct radio frequency (RF) power injection | ||||
| ISO 11452-9:2012 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9: Portable transmitters |
若您对上表中数据有任何疑问，请与网站联系。
